View Full Version : AMD
- 0547TPMW Opty 165 from Monarch
- Simple question concerning DFI NF4 Sli-D bios setting
- DFI 20pin and 5V Jumper
- Max safe 24/7 vcore volts for opty 175?
- DFI LanParty UT NF4 SLI-DR Expert 12/07/2005 BIOS Now Official
- IHS off?????
- Help with ballistix and DFI expert
- Expert 4x512 problems :(
- Need working speedfan for DFI-Expert
- Athlon XP 2500+ voltage for 400fsb
- WTF?? Do I have the worst luck with RAM or what?
- Post your Opty "AIR" overclocks
- setting the LDT voltage on MSI Neo4 Pl.
- OC gone sour... any way to recover data?
- What total of 2 gig RAM for an Opteron 170 and expert?
- Good´s steeping´s for Duron´s ApleBread
- A8N-E V2.0 issues
- Anyone have a 180 on SS?
- Sub zero cooling
- DFI SLI DR- no boot
- Neo2 non-plat questions
- AMD64 3000+ - 50% Overclock, 24/7 Stable - On AIR !
- Random BSOD - NVENETFD.sys?
- Does the Opt' 170//175 require Registered Ram??
- Need quick reply: Zalman 9500 on a chip without IHS
- Is it worth getting Duel core over a 4000+ San Diego?
- Maximum safe vcore for 3000 winchester?
- NFII ultra infinity temp sensors
- s754 Mobile 3700+ /w 2GB Redline
- A8N-SLI Premium BIOS Rev?
- 3800+ x2 vs venice 3200+?
- Moved from agp to pci-express......very pleased
- Odd Bootup ?
- Hitting a wall at 3.05GHz??
- Superlocked AXP 800Mhz over stock!!!! {Suicide shot :D} - And some questions
- Abit AN8 SLI - RAS precharge too high?
- ASUS A8N-SLI Premium troubles!
- Toledo or Denmark?
- DFI Expert and dual core
- registered ram? wtf.
- AMD price drops in January, any idea how much
- my 3500 goes 200 mhz lower!
- BIOS questions, need help ...
- silly question bout fx 57
- HOLY CRAP...My 3000+ is unlocked now??!!
- Anyone have clockgen for opty that has working fid/vid feature?
- Phased Change Cpu voltages
- venice of opteron?
- Venice overclock.. good? ideas?
- Is there mor to changing FSB/multi than different mem speeds?
- Anyone else had issues with 3.3v vdimm jumper trick on ultra-d?
- S939 vs AM2
- superpi 32M testing for dual core
- DFI SLI DR Expert - 150 divider constantly disappears??
- Ultra D - lower dividers stop working...
- what is "S&M"?
- SD3700+ instead of waiting for an OT146?
- Resistor missing on DFI Expert
- A64 memory/dividers question... 290x9 vs. 236x11 ... ?
- Just got insurance check, any suggestions on new rig?
- DFI nF4 Ultra-D Vcore fluctuations.
- What is your 24/7 vcore?
- Opteron 148 hits a wall at 3ghz?
- Xtreme Issues
- now my 3700+ doesnt seem to want to play
- Is it normal for my Northbridge HS to be at 80C?? Very worried about potential damage
- MSI neo4 platinum question on SATAII
- How to go about obtaining a better stepping?
- yikes, my PWMIC is HOT HOT HOT ... 95C !! problem?
- It wont post with memory that worked before.
- opt 148 CACJE????
- Attaching IHS back on
- Opteron 165 Stabilization
- What is your passively cooled NB temperature? Mine is at 80C??!!
- Asus A8N32-SLI and USB Boot Info:
- Do Opterons run hotter than Athlon X2s... keep hearing different things?
- dual core Opterons have lower stock voltage than Athlon X2s?
- Question about processor burn-in.
- Crossfire guide???
- Critique My Build (Final Changes)
- Opteron 182/150
- x2 3800, never idles.
- Strange Instability with SP2004 / Prime 95
- LDT Bus voltage?
- DFI Ultra-D AA0 or A02?
- rate my new build.
- Artic Silver 5 sticking the Heatsink and CPU together like glue..
- Opteron 1:1 issues
- Whats the best MotherBoard for 4000+ processor?
- Why spend extra for an opteron 165/170 when x2 is just as good?
- Opteron 170 vs 175
- ASUS A8R-MVP 1T Command Rate / TCCD problems ?
- Opteron and strange unstability
- 3700+ San Diego
- Is my ALU fuxxed up? Or my Board? Or ....
- 3700+ San Diego va 3800+ venice??
- X-fi and overclocked = Crash and crazy noise,,, need help
- no more vdimm over 3.2v on dfi
- What is the Highest FSB on nForce 2 ?
- updated version of SP2004?
- weird issue...
- DFI Expert video card POST beep - help!
- opt 170 or 150?
- What would prove to be better between these 2?
- Which CPU?
- 1.55v safe for a couple of 275 Opterons?
- do 7/04-2BTA and/or 11/14 recognize DC Opterons correctly?
- Best mobo with 3 PCI slots for Opteron OCing
- Opteron 165 running too hot?
- Finally got my Opteron 146
- Opteron 170 problem
- AMD 3700 San Diego
- Venice Rev. E6 socket 754 ?
- LBBLE 0515APAW Revisited
- DFI NF4 Ultra-D vcore readout point?
- Bad memory controller?
- DFI Expert Special Edition to be released.
- Question on startup when Benching/Stress Testing
- 3 Important Questions Before I Build!
- What's the big deal with opterons?
- 0x00000024 RAID 0
- My DFI NF4 broke, what to get now?
- Opty 148 OC
- A stupid question
- MSI K8N Master2-FAR
- Planning new rig.
- How hard would it be able to achieve 165 Opteron @ 2.2 with a A8N-SLI DLX
- Hit a wall i think...
- R580 Crossfire3200 News....
- Is there an updated Nforce Roadmap ?
- Going to give the Asus A8N32 SLI a try, any issues with UCCC ??
- What is wrong with my PC????
- Craziest comp problem I have seen, need help
- Need just a little more stability
- Opty 146 CAB2E 0546FPAW hitting a brick wall @ 2.9GHz
- 175 opty 3ghz?
- DFI NF4 SLI-DR and Geil Ultra-X BH-5
- Scored an IQYHA Mobile 2500+ - Let's see what it's got!
- Vcore and VTT
- DFI and Opteron probs
- Overclocking HELP!
- Is there a way to test....
- Done some searching on this Sandy stepping, but no info?
- Long beep on Ultra-D
- MOFSET cooling on SLI-DR
- NF4 Expert - Problem on shut down and power-on
- 170 Problems
- Anyone know how these steppings do?
- Venice LBBLE 0512 coldbug?
- Is it the MB or CPU?
- popped my top today
- Best BIOS for TCCD and DFI Ultra D??
- flashing bios, but which file to use?
- Question about voltage for venice
- Vcore adjustment for fx-55
- ABIT Q-OTES questions for other abit owners - AN8 Ultra, high chipset temps
- uprade advice plz
- Asus A8n SLi - anyway to go over 230Mhz 1:1 1T instead of 2T
- What went wrong?? maybe you know?
- MY 3200+ venice is getting hot^^
- Videocard problem
- DFI Ultra-D divider divides wrong?
- Which CPU is Better For Gaming?
- Resurrecting the Dead AMD64. gone capacitors on AMD64 can be fixed.
- Has your 90nm s939 caught the cold bug?
- A8R-MVP and RDX-200
- Asus A8n SLi Bios for 1T over FSB230??
- X2 question
- Opteron 170 stepping question
- NEW Xfire board out by MSI.
- best nf4 overclocking board
- NF4 Raid issues (XP Setup)
- cpu VID
- DFI NF3 Boot Issues.. :/
- How important is fast memory if ur not benching? (some buying advice)
- NF4/Realtek discussion
- what do errors on test 7 of memtest86 mean?
- Jason 'mickeymouse' pushes 4800+ to limits with mousepot!
- Voltage readings in smartguardian correct?
- Overclocking 1 meg
- DFI lanparty UT 250GB can't plug AGP 8X 9550GE
- Will a Motherboard fry if...
- IHS, contact, know, wondering about it.
- is this my ram or cpu or motherboard??
- RDX-200, NF4 Expert, Sapphire Gruper, Or DFI lanparty nf4 ultra?
- Reviews opty 170 vs x2 3800+??
- Should i change my a8n-sli for a DFI board??
- Issues cold booting!
- Currently at 2.6GHz @ 1.65v 3000+ E3 Venice, safe?
- question about memory sense i cant get to dfi street
- Power Supply Question
- chaintech 754 rig started randomly rebooting
- Opteron 165 Cooling issue
- New to DFI
- Is this sempron any good?
- Asus A8N32 vs DFI sli Expert
- Anyone pull off decent X2 overclocks with Asus A8N-SLI? If so, please help.
- DFI Expert Problem: 1.55 VID reboots
- Opteron 144, Venice 3200+ E3 or E4
- Need Help - Does anyone have this setup?
- Corsair XMS512-C2 Problems on Abit NF7
- What bios to use with opty's?
- Thermalright SI-120 or XP-90c for the A8N32???
- Is DFI working on a NF4-32x motherboard?
- Expert or vanilla?
- Temp bug with Asus A8N32-SLI board?
- My 3200 Venice Steppings
- Question about Ballistix timings,,, on expert
- Safe chipset voltage/temp
- Could the voltage fluctuation problems on the Asus A8N-SLI boards be fixed by a bios?
- Time to buy a new rig?
- why i hate amd
- Overclocking a 146
- Abit AT8 Crossfire ?
- Upgrade time! Could I get some advice please?
- Super Pi 1M Performance to MHz Ratio: Post Yours!
- CPU limitation
- Msi K8N NEO3 suckage! :(
- Need help, San Deigo not overclocking as well as I thought-
- Post your DFI Expert and dual opteron temps,,,
- PWM temp issues....
- did i hit a wall with my 170?
- impulse purchase keep or not
- R.i.p.
- Just orderd 175 opty from newegg.
- DFI expert Vcore readout
- Newcastles suck.
- No excitement for FX-60 release tomorrow?
- [Release] A64 Overclocking Helper X5.0
- need help, fried mem controller?
- FX60 reviews...
- First steps FX53, could help me to overclock it?
- Fx-60 In Stock
- opty for everyday
- Prime only 6hr 23min stable
- looking to purchace Opteron, need assistance with steppings!
- What opteron and where from?
- Removing and Re-Applying Thermal Paste
- 3800 x2 3ghz on air/new rev ultra d
- Question regarding DFI motherboard and Antec Neo PSU..
- Question Regarding SLI
- Which dual core?! AMD X2 or Opteron?!
- Computer Crashes under typing.
- specific question about HTT, 1:1, divider...
- Is DFI RDX200 & PcP&C 1KW compatible ???
- Removed IHS on Opty 148 - No difference :(
- Opty 148 Cabye problems
- Dfi Ultra D bios for bh-5
- Venice 3500 overclocking, help pls!
- Going crazy!!! FSB300 stable but 270 NOT!!!!