View Full Version : AMD
- Help! system shutting off randomly
- DFI NF4 Ultra-D - Thermalright XP-120 - Thermaltake GIANT III Compatible?
- S754 90 nM sempron or cheap A64?
- Good A64 mobo?
- Need screenie of gskill F1 LA pc3200 timings
- super pi 36s after NF3 chipset drivers 1m20s
- Need performance tips for my new system
- FIX IS HERE: Sandra Memory bench crashing and or crashing your system?
- Comparitive OC performance underwhelming
- 3500 clawhammer?
- Athlon 1ghz TBird Questions
- OC'in NF7-S 2.0 and sound stopped! ???
- Gigabyte K8NS PRO raid 0 help
- It's a good feeling that one mobo will last the whole year!
- DFI UT Ultra-D Bios Explanation
- MSI K8N Neo4 Plat
- Opteron roadmap
- DFI NF4 Ultra-D : Can't figure out my CPU temps in windows !
- Looking for a PSU to power a DFI NF4?
- Can't boot over 225 FSB
- Palermo 2600+ OC
- the first time use AMD-help me pls
- 3,000+ .09u A64 question
- Need advice on new system.
- HCC's new rig ready to get OCed - first pics !!!
- XP Mobo advice.
- here is my oc A64-3000+@2700Mhz
- K8n Pc3200 Fix
- 3500 newcastle?
- DFI LanParty UT 250Gb problem
- A64 Mobile, what to look for?
- DFI Ultra-D onboard Molex connector??
- Cpu-Z Enhanced A64 support
- Winchester IHS is off, but not much gain!!
- EQ2 Crashes, everything else fine. PLS help
- athlon XP voltage tolerance? help pls
- Epox 9NDA3+
- MBM5 reads DFI NF4 !!!!!!
- What are the best Newcastle 754 steppings?
- Look at this temperature
- MSI K8N Neo2 Platinum-54G Cons/Pros.
- Everytime I reboot my MSI K8N neo2 it hangs, on stable settings!
- Nforce4 Ultra Motherboards
- Opinions Needed
- Overclocking my notebook
- XP replacement board suggestions
- Can someone help me with my OC?
- NF7-S2G issues
- DFI NF4 and Raid, what SATA channels to use ?
- Had my new DFI running for all of 5 minutes and it wont POST
- MSI Neo4 Plat
- Damn! my GSkill LE 1GB kit took a dump...
- Chaintech Nforce 4 Ultra
- wat version of neo2 bio should i use?
- [9NDA3+] PCi cards not working
- MSI K8N Diamond NF4 and Subzero Temps ??
- DFI NF4 Problem here - help needed.........
- A64 Multiplier won't lock-help needed please
- On the way to 16K sandra arith....
- Venice listed April 26, 3000+ to 4000+
- Need Some Xtreme Advice
- new DFI NF4 beta bios
- Has anyone heard of problems with the Nforce 4 chipset and a four mem slots filled
- Looking to buy a 3500
- CPU cooling frusturation
- FX-55 V.S 3500@2.5 for gaming
- Anyone else have an 0431 NC?
- Can 3x512mb pc-3200 run higher than 333 on an abit NF-7?
- Looks like AMD is discontinuing some processors
- AGP freq. on MSI K8N Neo2 Plat.
- On to the Dark Side
- Gigabyte SLI Asus SLI DFI Ultra non SLi; HELP!! Have 30mins to pick!
- system wont boot, please help
- how accurate is msi core cell?
- Can't get over ~345HTT on DFI
- A64 3000+@3300mhz
- DFI UT Ultra-D and Razor Daimondback conflicts?
- New GUy to Forums Have a ? about Neo2 Plat.
- Asus Goes Dual Opteron PCI-e!!
- Who needs a venice?
- hard config problems
- ppl with DFI NF4 & 3000+@2.7Ghz & more post ur settings
- New Processor! Need Advice!
- Need help pushing past 9x300
- a64 tweaker freezes my comp
- When is the sapphire board going to come out?
- whats the point in having a very high HTT, eg 340+ ???
- any suggestions that might get my a64 3200 stable at 2.7ghz or higher?
- some 3500+ newcastle overclockage...
- DFI nF4 Ultra-D and voltage sensors?
- NF4 Ultra-D and OCZ PC3200 BH-6 (1 gig)
- Epox 9NPA+ SLI
- AMD RMA Questions
- Callibrating booster on Neo2?
- Gigabyte K8NS doesn't boot
- Which Venice 4xxx Chip Is The Equivalent of Last Gen's FX-55?
- Someone give me what settings u use for 300HTT and 1T timings on PC3200?
- go get your FX55's!!
- problem fx55
- nvraid/4xSATA-II raid0, NCQ
- Offical watch-group for Venice
- recovering from bios corruption
- MBM Config file for DFI LANPARTY UT nF3 250Gb
- "ABIT" From the horses mouth.
- Dead/Buggy DFI Nf4 board? post here
- Socket 754 max HTT/Memory controller issues
- DFI nF4 problem
- DFI nF4 3/31,new beta BIOS
- A64 recommendations ?
- abit an8 or msi neo4 plat.
- 3500+ death? Question about winchester
- AMD enters the GPU market!
- Video card, did I make a bad choice? motherboard related
- temp?
- DFI UT nf4-ultra D new install help.
- Solved my problem finally..........
- Need GCPUID tested on Win64!!!
- got my new system YAY
- Can someone explain this? (NF4 Ultra D Dividers fubar)
- FX-55 owners, I need some help.
- Venice Great?
- Cores
- No E0 4000+ and 3800+ now 3700+?
- How to get more volts out of my neo2?
- nForce 4 SATA II
- MSI K8N Neo2 Platinum PROBLEM!!help
- Any duel motherboards for socket a?
- All this love for A64 3500+ AS, but what about 3000+ DTR???
- Need a wattage calculator for winchester.
- msi k8neo2 question
- Dual Core Opteron sooner!
- MSI Neo2 Platinum and Corsair Value?
- Cbbid 0510 Rpmw
- X850XT,HD corrupted on DFI Ultra-D
- Need help DFI ultra mobo
- Usb Problem
- What in the world? Venice slower than winny?
- weird winchester voltages, 1.53V sweet spot, higher voltages give worse overclocks
- Please help neewbie
- my s754 NC
- pc 4800
- Best 939 m/b for BH-5? vdimm mods ok
- Need help, tweaking my OC.
- Need help with 1T issue on 9nda3+!
- Getting the DFI NF4 SLI, but what PSU?
- Performance/Voltage Index
- DFI Ultra-D vs DFI SLI-DR ?
- DFI NF4 needs new BIOS for Venice
- i need some Xtreme help
- Help me understand why my system performs better some days than others memory wise?
- A64 Tweaker
- DFI voltage table
- DFI NF4 SLI Rev.A00 Strange Network Problems !
- First 4000+ San Diego?
- divider problems 9nda3j maybe other boards
- s754 NC problems..
- Quality PSU for DFI nforce 4 ultra?
- overclock help plz
- DFI Ultra-D,X850XT,3000+Test
- dfi nf4 lp: How to set your voltages RIGHT (w/ working C'n'Q *and* best overclock)
- The most unbelievable thing happened to me
- over clocking tips
- DFI Socket939 nForce3????
- when is Asus, Abit, Epox, MSI, etc....going to step up to the plate ?
- A DFI happy story......
- Hardware Montior for DFI LanParty UT nF250GB
- Possibly Dead Motherboard (VNF4 Ultra) -- Ideas??
- SOCKET 754 with PCI express ASUS K8N4-E
- Stable @ 2.35, can't get 2.4?
- AMD 64 Stock HSF Thermal compound question
- Will a Chaintech Nforce 4 ultra board do justice to Venice?
- winny stuck on default volts (lol explained better in thread)
- Wini mem controller
- Need a good budget board for my S754 CPU
- Winchester Condundrum
- Should i put Creamique on the NorthBridge?
- 330+ fsb safe for 24/7???
- Aftermarket Chipset Cooling for DFI Nf4 Ultra-D
- 3500+ venice or 3500+ (clawhammer)
- DFI LanParty nF4 Ultra-D Problems
- DFI UT voltage woes
- AMD 939 PCI Express Board
- 11.5 multi with 3200+ winchester
- a64 +3200 stepping
- NEW OFFICIAL 9NPA series BIOS with Rev E cpu support
- XP-M 2600+ stuck at 202 FSB
- friend`s duron applebred:)
- Which CPU : 3800+ NC / 3500+ W / 4000+???
- Buy the DFI Ultra now or wait for the Sapphire Radeon Xpress?
- Help :( Dfinf4
- First ever 3200+ Venice review?
- Problems with new setup
- I cant run prime blend?
- A7n8x-E not playing nice with XP-M
- Pretty sure i just killed my DFI... or my winnie..
- DFI nF4-DAGF – The board considers not only Price but also OC
- Help with sudden freezing/restarting
- venice / memory controller issues?
- ASUS A8N-SLI Deluxe 1007.004
- Bedst socket 939 mb with pci-e ?
- My Winny's Stepping
- PWM temps on DFI Nforce4 series MBs
- 3200+ S939 0441 UPCW OC result ?
- Wondering if someone with Neo2 and XMS3200c2 1.1 could help me?
- l12 mod on a 2600 mobile with nf7-s rev. 2
- do i need a new psu or is mine ok?
- DFI LanParty UT250Gb - BOOT MENU
- Albatron KX18Ds Pro II Engineering Samples
- MSI K8N Neo2 Platinum: can't run at stock settings
- Is there an ETA on the Sapphire mobo?
- Which nforce drivers for Windows 64Bit?
- Finally hit 300FSB!!
- new member! reached 1.98 but was hoping for 2.0
- Problems With SATA
- XP-M IQYHA - Is this a good stepping?
- Have mercy on this pee-on please re A8V
- The First nF4 board can reach both enabling COOL&QUIET and OC to FSB 300?!
- msi neo 4 plat.. is it a good mobo?
- Memtest stable but can't pass SuperPI 1mb?
- Bios cpu temp vs MBM5
- Hostle AMD to let XS.org TEST :D
- NEO2 Plat and HIGH HTT issues?
- You can fry your memory controller from too much Vdimm?! anyone got experience?
- DFI Ultra D Cant Get Past 275FSB
- 400 fsb but can't get past 2.6 ghz what is the deal
- New Member! Does my mem controller sucks?
- Second PCIe slot giving me some trouble.
- Is it common for DFI NF4 to kill OCZ PSU?
- Skipped Venice ...
- Finally, Venice is here should I buy it now??
- New winnie steppings just as crap as previous.
- Do "crappy" Winnie stepping OCs include using the divider?
- Another DOA Ultra or RAM problem?
- 3700+ 939 1Mo L2 Core San diego ????
- what does post code 1.7 mean?
- CPU Thermal-Throttling
- New A8N-SLI BIOS: 1006 FINAL
- Successful DFI NF4 Install
- Ram crapping out or perhaps mem controller
- Win x64 issues....
- EpoX 9NDA3+ modde bios or similar.......
- MSI Neo2 Platinum Decent OC'er?
- DFI Temps And stuff
- A64 3500+ CAA2C = Clawhammer (See to believe it)!!
- My aircooled 3200+ winnie @ 2.9GHz!
- Abit AN7 vs NF7 2.0 difference?
- Ultra-D chipset fan... should I remove the "pad" stuff
- A8N-SLI modded BIOS?
- Going to pickup a 3000+ 939 locally. What is the best stepping
- DFI NF4 Temp Monitoring