PDA

View Full Version : Xtreme Overclocking


Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 [35] 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54
  1. Need to hardmod CPU multi on 2400+ M
  2. Crucial Ballistix DDR500 or DDR400 TCCD Sammy for A8V?
  3. Average A64 CG clocks @ 1.75v on air?
  4. Another happy FX55 owner.
  5. bh5 290+ 2-2-2-5
  6. New Member! and first Question....
  7. How does the celeron D do in super pi ?
  8. AMD Athlon64 "Winchester" 90nm 3200+ ??
  9. Extremely Odd Problem
  10. Any RAM That Could Hit 600MHz?
  11. GSKILLS PC4400 Ramheatsink question
  12. What does Intel use?
  13. 3.3v rail question.
  14. max volts for winchester??
  15. New A64 3400+ Ver.06 @ Superb Overclocking
  16. * Ram Timings Test Please *
  17. Some ATI X700Pro PCI-Express results
  18. 3400+ @ 270x10 On air !
  19. Is my PSU limiting my overclock?
  20. Enhancing the memory voltage
  21. 600w Powerstream available now
  22. TCCD and high voltage mystery explained
  23. How can I effectively OC and bench using 3dmark03?
  24. BH-5 or TCCD? what do you think?
  25. No luck oc'ing my FX55
  26. A64 3200 Overclock
  27. OCZ's New PC3700 Plat. EL (2-3-3-8) - What chips is it using?
  28. Msi k8n neo +amd64 3000 + Ocz 4200 EL?
  29. 3700+ @ 3.2ghz - P Rating 4900+
  30. Ram holding me back?
  31. Is A64 0432 v0.6/v2.6 Strained Silicon?
  32. What's missing? My TCCD no good on Neo2?
  33. mem timings, im lost ?...
  34. what is the highest safe RAM voltage without extra cooling?
  35. old question I am sure but be kind A64 vcore with mach 1
  36. what chips in ocz3200el
  37. 2.8Ghz @ 3.6Ghz vs 3.6Ghz
  38. Gskill DDR610 on DFI LP UT
  39. epox 8rda3+ over 228 FSB
  40. a64 3500 939 stepping code
  41. Timings make more diff at high or low fsb?
  42. Fried my 3500+!
  43. strange strange problem...
  44. DFI 875P-T @ 6Ghz
  45. 9800pro to X800pro upgrade: less fsb possible!
  46. Best BIOS for SK8V?
  47. BH-5 memtest stable but not windows stable?
  48. Best memory @ 2.9v???
  49. newbie need help in overclocking !!!
  50. weird results in another xbitlabs review
  51. Subzero MSI Neo2 temps?
  52. Best Memory!?!?!?!
  53. Immediate errors in Prime95 & SuperPi at default?!
  54. Asus P4C800-E BIOS 18 "CPU LOCKFREE"
  55. New DFI LanParty UT Nforce3 250 and 1GB OCZ PC3200 Rev2 A64 3200+ DTR need help!!!
  56. 5K+ sandra mem with LPUT 250GB...
  57. Could I 'get lucky' with prime?
  58. Memesama got 3.8ghz+ on a FX-55!
  59. Good Winchester 3200 Core!
  60. MSI Neo2 and Vcore without using Core Cell?
  61. Neo2 dividers
  62. How to O/C a MSI K8 Neo2 Platinum board?
  63. Intel 3,4 E0 ES S478 OC
  64. New OCZ PC-4200 Platinum @ 550CL 2 , 600 and 630
  65. OCing issue
  66. How do you check your PC is stable when overclocking?
  67. Flashed x800pro vivo or x800xtpe - Max Overclocker?
  68. X800XT H2O cooled speeds + hints...
  69. It's Winchester 0433SPMW 90nm 3200+
  70. Neo2, 3500 Winnie, Mach II GT, OCZ TCCD -
  71. New personal OCing record with Barton 3000+
  72. winchester 3200 or 3500
  73. Big problem - K8N Neo 2!!!
  74. Overclocking a P4 2.8E
  75. Winchester or E0 ?
  76. Amd64 3000+ Dtr
  77. First run with new card...... any good?
  78. Epiphany of Questions (Benches, Mobos, Memory)
  79. 3400+ cant get 3ghz stable
  80. Fortron 350W-3.4C@3.7Ghz + 6800/X800?
  81. SuperPi 1MB is now dead ! => what will replace it ?
  82. 3800+, AV8 Corsair TCCD, best timmings ?
  83. Abit KV8 v1.1 Pro no post
  84. Tweaking System for Overclock!!!
  85. Question of the day:Has OCZ actually SHIPPED 3200 pl rev.2 TCCD with the new die rev?
  86. Overclocking Stability
  87. Is the 3700+ a good overclocker in general?
  88. Samsung TCCD max voltage?
  89. 6800Ultra stuff
  90. How do I know if the PSU is holding back my overclock?
  91. Running cold? Temp senson wrong?
  92. Is 1.7V safe on 3500+ Winchester for 24/7 usage?
  93. What ram do you suggest for an A64?
  94. retail or oem winchesters
  95. anyone using celeron D or grandmars 9550 infinite?
  96. OCZ PC3200EL Rev 2: How do you know if you have the new die rev chips?
  97. troubles oc'ing with K8N-E deluxe@cool 'n quiet?
  98. The 6800 Limited Edition - Overclockable?
  99. Trying to OC Fx-53 + MSI Neo2. HELP!
  100. New PSU
  101. Athlon 64 Sandra memory problem
  102. ATI Tool Memory Timmings
  103. whats best HTT X1X2X3X4X5 ???? on msi k8n neo2 or best bios
  104. Mushkin BASIC 3200 ?
  105. MSI k8n neo2 northbridge problem.
  106. FX55@ 3.7g
  107. Superpi 1M 77 seconds WTF?
  108. What's your best overclocks
  109. Help, cant boot past 270 HTT
  110. Losing LAN and Sound on the K8N Neo2 Plat.
  111. MSI k8n neo2 htt problem
  112. Dothan vs Winchester?!
  113. Noob droop mod question
  114. Setup for +3GHz A64?
  115. Doh!
  116. max. Clock for TCCD at 2-2-2-5?
  117. DFI infinity nf2 vdd mod, is it worth it?
  118. The best system for the budget
  119. 1.7v = no boot?
  120. Best 6800nu to overclock?
  121. No Boot At 2-2-2 1t
  122. OCZ 3200 Plat DEFINATELY Sammy 431
  123. 2.8c, 1.7v What can I get?
  124. Best RAM available?
  125. First OC Attempt with my 3500+ 10x265 superPi 32s
  126. FX-53 vs. 3500+ Winchester
  127. Memtest 86 Guru's
  128. TCCD in nForce2?
  129. MSI K8N Neo 2 <-> PSU Problem
  130. How to take off heat spreaders clips ?
  131. memtest86?? I dont get it!!
  132. Strange OCing problems
  133. agp overclocking
  134. A64 Overclocking guide....contains a Winchester....
  135. Any mod that will lock AGP on a SK8V?
  136. Gskill Problems
  137. Ep-9nda3+
  138. Gskill 437's a la casa
  139. O/C problem - opinions needed
  140. So Where DOES one get a newer rev NF3 chip on MSI?
  141. Overclocking P4, help please!
  142. G.Skill review is up, for those who care
  143. 3500+ocz neo2
  144. My Gskill 431 TCCD(512MB*2)
  145. Hmm what is diff between this two gskill module?
  146. Ram ratio questions.
  147. Kingston HyperX DDR2 @ DDR800
  148. OCZ Booster no longer boosting??
  149. FSB 400 @ 533 RAM Problem
  150. K8N Neo2 Platinum Overclocking Help
  151. Which of these memories is best @ ocing 3000 winchester?
  152. 2.8E Prescott Overclocking
  153. Athlon XP3200+@overclock
  154. my overclock so far...
  155. Advent P4 overclocking no BIOS settings
  156. Crucial pc3200 @564
  157. OCZ EL DDR PC-3200 Platinum Revision 2
  158. so I got 3000+ winchester and Gigabyte GA-K8NSNXP-939 nForce3 Ultra Motherboard
  159. Mushkin BH5 voltage?
  160. AN50R locks?
  161. Win2000-"more-fps"-myth - does it work with win2k3 too?
  162. Yet Another I Love My Winchester Thread !
  163. Hmmmm, Vas is dis!?!?!?! (For CPU heatsinking?)
  164. corsair XMS3500C2PT (BH-5) and Neo2????
  165. 2CMD in SiSoft Sandra
  166. Help!! First Time OC, 3000+ winchester with MSI K8N Neo2 Platinum
  167. How much volt for my X800XT PE?
  168. When overclocking: Cheap PC4200 better than Expensive PC3200?
  169. 3200 winnie ok clock
  170. 600 Watt Powerstream Problem
  171. sl7j9 560 ES
  172. need sum help with my ocz
  173. G.Skill PC4400 2.5-4-4
  174. which TCCD ?
  175. Fsb 258 Ok, Fsb 259 No Go !
  176. K8N Neo2 questions
  177. BH-5 and K8NSPRO
  178. Mach1 and msi meo NF 3 ultra not compatible ?
  179. OCZ memtest newer verison out yet? :P
  180. 3400+ NC 0432 ver.6 oc!!
  181. P4 Northwood Core voltages?
  182. 7700MBS in sandra with DDR 2 -does this make DDR worth owning ?
  183. The A64 ".5" myth, give you DDR620 2.5-3-3-7(1T)
  184. Does anyone run 2m or higher Super PI
  185. Upgraded to Winchester, 3dmark score went down
  186. a64 3400+ Mobile DTR and 29" sec. and SPI 1mb
  187. 1m SP at 10x245 but not at 8.5x285? Winnie 3200+ & Neo2 Plat
  188. What is my problem?
  189. Geil ULTRA-X and A64 Mobile & DFI Ut nf3-250 for 29"
  190. GSKill and the DFi compatibilty problem???
  191. Need help @ OC
  192. help needed????? 0.09 3500+
  193. My memory faked me :)
  194. 3dmark 2k1 24x7 but superpi 1m fails?
  195. FX53, Prometeia II GT and OCZ TCCD
  196. How to use A64 tweaker.
  197. DDR Booster user guide.
  198. Ddr 2 @ 840mhz 4-2-2
  199. Possibly idiotic TRAS question.
  200. Gskill not that great with p4 mobile on abit IS7
  201. advice on ocz 3500eb with k8n neo2 plat
  202. Maximum VCore on A64
  203. Stable winchester OC,but not in games?
  204. World's FASTEST Winchester....
  205. A64 the need to go higher
  206. Which would clock higher? 3200 or 3500 winnie
  207. New World record in SuperPi 8M
  208. IC7 + 2.4C problem
  209. A8V @ unstable | 240FSB
  210. Need advice ergently....:(
  211. Did ATI ever make X800XT non pe?
  212. OCZ Platinum 3200 Rev.2
  213. Is this a good oc combo?
  214. hey, i have question about Corsair 3200XLPRO
  215. AMD 2500+ won't run at 2400
  216. TCCD OC Roundup
  217. GSkill PC4400 Problems
  218. How are people doing with TCCD DC?
  219. Asus A8V and VIA sATA controller locked?
  220. Best Athlon XP for OC'ing?
  221. Anyone tried DDR Booster on SK8N?
  222. 5-4-3-2 v's 5-3-3-2 is it worth it from 4-3
  223. a64 2800+ @ 2.49GHz
  224. 300htt 1/1 on K8NS-Ultra 939
  225. K8N Neo2 vcore problems
  226. 6800GT overclocks
  227. Got my gskill pc4400 today
  228. Highest speed anyone ever got a 2500+ barton?
  229. Want to get a 64 CPU + MOBO to OC...some restrictions MAY apply...
  230. cheap tccd @ 550mhz?
  231. what is good X800 xt pe clock?
  232. low latency ram or phase?
  233. GEIL ULTRA-X pc3200@334Mhz 1:1 on a64 and
  234. What current crop of video card will do SLI when the board hits?
  235. Corsair XMS PC3200 @ 343 1:1
  236. PDP XBL (2-2-2-5) not doing well
  237. nf4 sli in 3dm2001
  238. So how high a fsb can winchesters do dual channel
  239. Gotta Love Da' Centon
  240. safe voltage for my a64/pqi3200
  241. P4 and Socket 940 Safe Voltages
  242. Want a CPUZ Screenshot Verified?? Post it here...
  243. Asus A8V rev.2, 3200+ and TCCD
  244. DFI 875P-T with bugged 5:4 Ratio?
  245. noob need help bout DT-D43
  246. 2500+ Barton wont get stable
  247. Overclocking Database
  248. Will a new psu further my OC? Come check this please..
  249. what FSB can i expect from bh5 & dfi-nf3?
  250. What AMD CPI would my P4 Northwood 2.8@3.2 be equal to?