View Full Version : Xtreme Overclocking
- Wattage question
- just me, or is memtest running slow on DFI 250gb?
- What's the highest Sandra Bandwidth with NF2 & 2x512 ???
- Yet Another |Ricky| and Pedro Rocha World Record :-)
- ram/fsb question help needed
- 285 1:1 2.5-3-3-10 1T w/ OCZ Rev. 2
- PCIe 6 pin power
- Mobile XP2600 stable @ 2767 on air
- winchester OC results???
- Anandtech RAM review with AMD64
- 2nd Rig
- What are the typical limits on A64 3400+ clawhammer?
- Can someone with BH5 @ High FSB help me?
- Kingston bh5
- Whats going on with my 6800 GT?
- 3 systems, 3 choices...
- P4 3.4C @ 4.3GHz need help OCing plz!
- what if Gskill TCCD running under MSI K8N NEO2 with single channel
- How do OCZ 3200 Platinum Edition REv 1.0 Clock?
- PSU selection
- PCP&C 850W & 700W power supplies
- P4 3Ghz @ 3.75, want to go higher
- MSI K8N NEO2 dual channel benchmarks really low.
- weird: new vga doesnt allow PIII tualatin OC
- X800XT Plat questions
- Mushkin L2V2 or Corsair XLPT?
- AMD VS INTEL informative read
- How to bench unbuffered @ sandra
- what are the most relaxed settings?
- Memory question.........
- TCCD Tweaks on AMD 64/939 Platform Reference...
- 90nm done right, winchester 20W cooler than newcastle at same clockspeed!
- DDR2 800MHz
- SK8V Question on fsb. (7000mb per/sec)
- Dead Mobo Need Opinions
- MemTest-86 Question
- My 3.4E S478 with the 14 multiplier
- A8V and OCZ EL PC3200 PE Rev 2?
- Need quick guestimate of power output of CPU.
- P4 2.8C @3.5G would like to go higher.
- Whats 1T or 2T setting in A64 mobos bios, is CH5 are able to work with 1T ?
- CPU speed/multiplier affect memory stability? (amd64)
- s939 3500+ 90nm, not bad though
- can it run 1T
- First Time O/C (A64)! Promising Results
- OCZ powerstream 520 and DFI nf3 250gb no go :(
- Caution : P4 IHS hole in the corner
- Help my poor ballistix pc 4000
- How much voltage do I need for 2.4GHz
- 875 Mobo Question ?
- A new PSU or combining two old PSUs?
- Performance loss after OC?
- Gigabyte K8NSNXP Big Problems HELP BEFORE I BROKE THIS BOARD!!!
- OCZ vs Corsair
- GeIL PC3200 questions...
- FX 53 will 1.7 volts kill this cpu?
- amd64 cpu unstable at any high HTT regardless of multiplier?
- clockgen
- Mushkin V2
- LP UT 250GB with 512MB TCCD 1T DDR 600 BIOS Setup Example
- how's this for pqi 2x256 pc3200 turbo?
- Timings on GFX RAM and nF2t help.
- Anyone else tried OCZ3700 plat EL?
- My 3500+will do 2.4, should i exchange it for a 90nm?
- A64 3200+ do 2700mhz air cool!!!
- 6k pIII
- P4 3.6, A64 3700+ or FX-53?
- Intel 540 vs 550 - Which is better on Air?
- P4 3.0 : strange OC problems
- How much voltage is safe for tccd chips?
- New WR 6Ghz
- Only FYI: OCZ 3700 Platinum VS GSKILL LD(low end) VS Curcial Ballistix pc3200
- DDR600 screen shot from digital camera
- DDR600 2.5-3-3 1T with Corsair TWINX XL in Lanparty!
- 1Gb kit: OCZ EL PC4000 Gold × GSkill PC4400
- MSI K8T Neo or Gigabyte K8VT800??
- New Cats are out (v. 4.10)
- FAST WRITE holding back video card OC??
- P5AD2, P4 3.4E, XMS2 PC5400Pro, EAX800XT: What's holding me back?
- vCore in a 3.2 Extreme Edition ??
- overclock on an7 with amd athlon 2800 barton
- So you all want low latency DDR2.
- BH-5 vs TCCD for A64 754 rig
- How about DDR654,8754mb/s for 2x256mb Dual channel?
- AGP Lock on ABIT and ASUS?
- What voltaje can i go with CH-5?
- MSI K8N Neo2 Platinum all SATA ports are locked?
- gigabyte 8ik1100 vs asus p4c800 gold
- OCZ DDR Booster and DFI LanParty UT 250GB not working
- New AMD64 939 90NM Post ur results...
- MSI K8N Neo2 250FSB with BH-5???
- The bandwidth benches on all above DDR600 with CL2.5
- Chipset cooler for DFI UT 250
- SFF Motherboard Info Needed
- Is bh-5 still alive? got 2x256mb running at ddr560 2-2-2-5
- "Bank Interleaving" would increase memory bandwidth?
- Samsung TCCD ram sticks help?
- whats wr fsb on a nfoorce2 mobo?
- Abit "Fatal1ty’" motherboard series
- i have gigabyte 8ik1100 and asus p4c800 need help!!!
- NF7-S Rev. 2.0 maxes out at FSB221?
- Gskill TCCD is the real deal so far :/
- DDR speed record?
- 3Dmark2k1 run@3G comparison between BH5 and TCCD
- Anyone using the PC Wizard 2004 Ram Bench?
- Troubles P4C800Deluxe(I875) fixed with TCCD mem.
- 300 Mhz 1:1 - which ram?
- Does this seem about right?
- Xtreme stuff, DDR620 budget sticks, Hyper 6...
- New O/c Idea!
- 3000+ S754 or 3000+ S939?
- OCZ EB Overclocking
- 48 New BIOSs Out
- How much volt on Ballistix 3200
- Well, finally took the plunge.....
- Best Ocing BIOS for the A7N8X- Deluxe rev. 2
- 280mhz 1:1 on IC7-Max3 w/TCCD?
- Choosing the right socket 939 athlon and motherboard
- Help Overclocking an ES
- Possible not more than 290fsb in 5:4 on P4C800?
- So you love to ses 9k bandwidth?
- 90nm 3000+ & 283mhz(2.5-3-3-5) 1:1 TCCD
- Gskill pc4400 came today and I am unimpressed!
- Anyone getting 300fsb 1:1 dual channel 2.5cl or better?
- 1GB of 300mhz on a dfi s754, possible?
- Abit Av8 3rd-eye or MSI K8N Neo2 Plat for 3500+ high FSB clocking which?
- IC7 MAX 3 Overclocking advice
- Athlon64 FX-55 and the Athlon64 4000 reviews are out
- How Fast? XMS 3200 Twinx
- 3.46EE 1066qpb reviewed
- xbitlabs 4000+ & fx55 review
- Chaintech Vfn3-250 and Vitesta 566 for 322Mhz 1:1
- Replace P4 EE with A64 ??
- MSI Geforce FX 5900XT
- Corsair CMX 512MB 3200C2PRO... Latency!
- Overclocking with my kit?
- Galaxy Glacier 6800gt - Big Problem!
- OCZ PC3200 Rev. 2 2x512 MB OC results
- msi fx5900xt overclock (orb#2)
- P4 2.4A Prescott
- DFI LP UT NF3/AMD 3200+ CG DTR/G.Skill 2-2-2-5
- New to the forum...
- looking for some OCing advice
- What's the WR with 2-2-2-x timings?
- the final competition poll is up!
- beta Nvida Ntune 2.xx ->
- Wich driver for FX 5800ultra
- 90nm 3200+ run DDR600 1:1 1T
- What would gskill do with 875 dc?
- budget socket 478 overclocking!help needed
- Challenges of the SPEEDs under Memtest86+
- LOOK ! Buffalo 512MB PC3700 Micron $87.95
- PQI TCCD with IC7-MAX3.. one issue
- Ocing a PIII
- Hit the wall for A64 Overclock.... Help please?
- crapy rails killing overclock
- News AMD's Chips Rocks !!!!
- ABIT Launch nForce3 250GB board... finally
- 3700+, DFI NF3, and OCZ 520w
- 30K possible?
- BH5 ram and S939 ? Working or not ?
- Overclocking a p4 mobile
- P4 3.0 sl6wk problem
- Power Supply Questions? (OCZ PS 520 ADJ)
- 2800+ 35W a64
- Damn seems i fuxored my ram :(
- Need to find PCI clock at hardware level HELP!
- DFI Lanparty nForce4 SLI
- S939, 90nm: A64 3000+ or 3200+?
- P4 3.6 performance loss, ?
- vdimm modded Asus a8v owners.......
- DFi UT + Newcastle 3000
- DFI Lanparty 754 ram settings
- To get higher memory freq you raise ...... vcore
- very very weird stuff happening.....
- How to get over 280fsb in dual on K8N noe2
- What does this screen corruption indicate?
- burning in, does it *really* work?
- lga 775 3.0 @ 3.92 need help with performance
- FX55 + GSKill...holy smokes!
- We should overclock my laptop!
- weird GSkill SPD programming and heavy probs on abit kv8 pro 1.1
- A64 3000+ @ -47c
- LGA775 benching sys
- Anyone know what this ram is?
- no post when memory settings changed...
- Sneak Peak at the OCZ memtest86
- New WR pifast A64 NewCastle
- 3400+ are this ok results ?
- DFI & ClawHammer C0 Help
- 90nm 3200 @ 306MHz 1:1
- Qhich OC 1GB modules for A64 platform?
- any socket 754 amd board on which TCCD perfrom well EXCEPT the DFI?
- post you A64 tweaker/ATi tool mem timings
- Prime95
- Something Really Stupidly Obvious Occured to me
- Dropping 12V rail sign of weak PSU?
- X800PRO(nonvivo) to X800XT ????
- 3200+ DTR @ 2500mhz 1:1 bh5
- Reserved settings for LDT/CPU multipliers
- GSkill + I875P.. any good?
- 939mobos and ram ratios?
- Dfi 875t & 3.4 775
- Mission impossible : 290 1:1 2x512MB Hynix –D5 CMD 1T @ DFI
- Which manufacturer for R360 9800pro
- How to change your CMD
- Sempron3100+ DFI NF3 Socket 754
- This is weird
- What do you think about an "external overclocking controller"?
- Suggestions for new mobo+cpu :)
- Anyone here care to help a newbie getting the most out of hes system?
- What is better waterchill or air cooling???
- OSKAR_WU - How long until DFI 939?
- Figured out the problem / New Stable OC 2.71 - a64 3500+
- 12V drop too much for OC?
- Is it the memory controller?
- winflash?
- Hello hello what's this OCZ 300MHz @ 3-2-2 stuff ?
- Need help O.C.
- what 939 boards are recommended using TCCDs
- Need Help OC---Please Look In.
- A-Data = Gskill killer?
- Good Speed and timming with Buffalo 3700 with Micron -5b C
- DFI 754 UT max 3.4v vdimm?
- Asus A8V Deluxe & Athlon 64 3500+
- IS this PSU enough to go to 4Ghz?
- got me some GEIL Ultra-X
- overclocking newb
- OCZ Announces 600 Watt PowerStream Power Supply
- new WR by memesama fx-55 3827.3MHz
- vCore 1.7 to Pentium 2.8C
- how far can I overclock my computer ? need advice
- 3500+ Winchester Overclockability?
- TCCD 2-2-2-5 @ 255mhz @ 3.3v
- 2.8 ghz on air!! ~Mostly stable~
- Does this look right? (bandwidth wise)
- Help with faulty Buffalotech memory!
- Winchester Core is Really Small!!
- AMD FX-53 & Vapochill
- Phase change @ 5.9Ghz
- New Ram = 2700 @ 300x9 1:1
- Effects of T2 compared to T1?
- Intel Pentium 4 530 (3Ghz) @ 4Ghz on air...
- Intel P4 HSF roundup
- DDR Booster = No Stability
- Errors in windows, heat issue?
- OMG RuL0r DDR2
- xtreme lottery has started!
- New Blood for the VapoMAXX
- Any things to say about the OCZ EL PC4400 Gold?