View Full Version : Xtreme Overclocking
- Bad Flash Gcard
- My Mushkin Level II PC3200 Hisses!
- Good Reading
- sub $500 gaming rig
- #1 on the orb, baby!...
- cpu speed variation on the desktop?
- OCZ recognizes Fugger's O/c skills!
- Finally new rig - suggestions appreciated!
- Help AGP Problem!!!
- How does the Abit KV8 max3 perform?
- mushkin pc3500 black level 2
- Overclocking a P4 and hyperthreading?
- Kingston HyperX on it's way...
- Overclocking a 2.4B
- Best DFI Infinity Bios?
- Ram cooling
- Athlon FX and ATI 9800XT overclocking
- Overclocking a P-4 3.0Ghz
- Just a few Q about BIOS for G-cards (Tyan)
- Buffalo PC3700, BH-5 back at newegg??
- Overclocking memory question
- Need help
- Fresh mobile meat
- khx3000/256
- My ti4200 oc
- Retail store in Buffalo for mobile 2500+?
- Overclocking prescott 3.0e
- would 1x3cm ramsinks be ok for 9800?
- Overclocking question.
- Attack of the Shim, part Deux!
- OC rebooting the system
- Command Per Clock
- Do you overclock your monitor?
- xp3200+ barton ocing?
- GEIL autopsy
- no SLK-900U on a DFI Infinity, what now?!
- Laptop clocking - clock gen help.
- Zalman CNPS6000-Cu
- Oc'ing a teddy bear maybe ?
- Scythe Kamakaze
- What do you attack VRs with
- 3.2EE Rig Pick Please help!
- Tips and advice please
- FX-53 benchmarks in the hizze
- How many guys run 24/7
- PAT & CPC in P4c800 Delux
- Winbond BH-4
- pc power & cooling voltage modification....????
- This look good for a WD 120gb 8mb SE? ;)
- What are your 2400+(non-mobile) overclocks?
- When do the 939s arrive?
- What is wrong with this vmod? Pics included.
- OverClocking AXP2400+ to 2.46GHz. I wants some more!
- RAM won´t go higher
- epox 8rda3+ and bh-5
- what's wrong with the '03 orb?
- Excuse me but isnt this BH5?
- P4 2.4C@3.68 and OCZ bh-6 On AIR
- prescott in an HP!
- Best, cheap, easy mod PSU
- So, you want memory bandwidth?
- Need me a new water block, suggestions welcome
- FB-DIMM - Low latency for DDR2?
- new psu suggestions please
- A 64 3200+ only stable at 3.2 GHz?
- IC7 vagp mod help??
- what to expect from 3.2c ?
- Finally, the eluded 250 is no more!
- what drivers to check 9800 temps?
- Vid card problem
- Have you ever shorted a CPU with too much Silver?
- Good CPU cooler to mod for 9700 Pro?
- Alright this is pissing me off...
- Temp reading software.
- FSB 250 = HD corrution
- Which board will overclock better with 2x512? k8t or nf3?
- Enermax PSU and OC
- AMD Duron 850
- 10k in 03 by Macci!!!
- 9800 user experiences only please!
- artic silver 5 vs ceramique
- 337 FSB..and its Freeeeze
- kingston stopped using BH-5 ???
- Raptors
- intel releases 2.4ghz prescott???
- Best RAM for me?
- Anyone here have a 9800xt on Air or watercooled stable at above 505mhz?
- Quick question about vmem
- need some advice on board/processor
- My Rad9800 Pro
- How do I know my corsair XMS3200 is BH-5?
- urgent! 9800 pro modding
- quick NB lapping question
- GB K8N Pro bios options lacking?
- Finally finished my 9800 Pro vmods...
- I got a very nice stick of corsair value ram, not bh5
- freeware temperature prog that doesnt waste cycles?
- Jaggedonline gave me wrong Sandra cd
- 2xMushkin PC3200 BH-5, Can I replace one of this?
- Rad9800Pro+Catalyst 4.2+DX9b= AGP Speed OFF+FW OFF?
- AGP voltage
- Is this a fake, or real? you judge...
- Problems with vdim above 3.05
- random reboots while overclocked...need help!
- need advice on what size tubing...Koolance case
- EpoX 8RDA+, how much Vdd, low performance.
- If anyone needs 2x256 Mush bh-5
- What is the best memory to get on a 9800pro 128mb?
- Rebooting :(
- Coolest 3DMark score I ever got!
- Best artifact free 9800xt OC...
- Fx-55
- The score with A64 motherboards
- Finally done it!!
- 112ohm resistance on NF7 vdimm mod, proceede?
- Can get Prime95 stable
- 250Mhz attempt on nf7-s V2.0
- Khx3000 - D328dw-45
- Did my motherboard or CPU die?
- which 9800pro?
- BH-5 + 2.4GHz - What mobo?
- Sick or what..9480TVD..
- My mobile - what the hell
- Noise and interference
- I broke 25000 in 3dmark2001..
- help
- Hot Damn!!! -130C chiller on ebay...feasible to use?
- Would an Alpha PAL8045 + RAMsinks fit on a Radeon 9800 card?
- Help me not kill another A64 with Shuttle Vdimm!
- Via: Finally an asynchronous bus design
- Anandtech speaks on DDR2
- 3dmark03 10k has been broken!
- Dimensions of Infinity?
- looking for some help from anyone...
- 7077 3DMark03 any good?
- How's this score for an air cooled system
- CH-5 2X512 2-2-2-11 @ 3.2v
- Powr Switch on case + PSU Power_On wire?
- Running BH-5 and CH-5 at the same time...
- Video editor's delight OCZ 1GB modules
- Windows based memtest ??
- max. safe Vcore for Athlon 64?
- P4P800 patch to enable PAT. Grab it while its hot...
- 5.35v rail to high?
- Memmory Stability Question
- testing
- re 3dmark scores ((25245))
- Fastest drivers for 9800pro and socket A?
- NV40 specs : 16x1 architecture!
- Asus P4S800D-E SiS655TX
- only 217MHz 2-2-2-5 with my Corsair BH-5 sticks?
- All Precott owners Post Ya OC Here
- DFI Lanparty Rev. B Problems-Need Advice.
- Mobile 2500+ @ newegg says 1.25V ??
- convert opteron 1xx and 2xx?
- 8rda3+ @ vdd mod
- p4p800 question
- Is this an ok 2003 score?
- project: FURY is underway....
- Need Some Help...
- Removing the Pink stuff on a Geforce gpu
- OCZ PC4000 Gold Owners Post your 1:1's for me
- How do people discover volt mods?
- Benching naked:D
- VBT question
- Should I buy 2x512MB Twinmos BH-5 for 170€?
- A64 3200 vs. P4 3.0C
- Prescott 2.8/256K/533FSB ES
- 9800 Pro - max core voltage with AIR cooling?
- I think I broke rivatuner -> 9600XT lurvin'
- Which 9800XT
- Help! Trying to set up outside the case.
- Which is the better overclock?
- Need BH-5 ID super fast....shopping :D
- good results for a 9800XT with a 1700+ on air?
- How Well Are You BH-6s Running?
- short driver question
- What's your highest FSB with Samsung RAM???
- yes i hit 6000 at 3d01
- yes i hit 6000 at 3d01
- Spoiled circuits on NF7-S
- p4p800 graphx corrutpion
- what a suprise...File Corruption!
- OCZ PC4200 and AMD ?
- Need help trying to get my hyperX running 260 mhz 1:1
- cant read the voltage=dead?
- 2.8c m0 volts
- Ti4200 destruction video.
- A64 3200 Overclocking Adventures Brought to an END! Please help
- removing heatspreaders
- Which is a better motherboard? Gigabyte K8Npro or Chaintech nforce3?
- is yhis the end of my oc?
- Heat or Voltage? 9800Pro
- My 140$ 9500NP hits 20k on air!
- Little help from an Ati 9800Pro owner
- Memory Timings?
- New World Record for 9700PRO on air? 520!
- ECC Registered ram take voltage ?
- prescott 3.0E and 3.2E delayed till april!
- Maximum safest vcore and vagp on Intel system
- 10613 3d marks on my Ti200
- Thermal dissipation of 9700 (R300)?
- P4 change to A64
- OCZ Special Edition PC3200 - ppls opinions?
- Help O/C my K8N Pro
- running sdr and ddr at the same time
- 9800SE or 9800 Pro
- Will any double sided tape do?
- Help me OC my AIW 9700Pro
- Btx or not too BTX
- Gigabyte K8N Pro CPU temp reading when using Vapochill XE???
- 90nM Athlon 64 /FX to have SSE3
- Best nForce2 Chipset Drivers for NF7
- 2800-overclocked 2.5 on air help to try and improve
- mushkin 3200 bh-6 - any results yet?
- 9800p hole template?
- FX 5900 Ultra Tweaking.
- Shuttle AN50R & ClockGen: Problems!
- R9800 pro vgpu - vddr
- Have an issue with system rebooting.
- Minimum Peltier for 9800Pro?
- best cheapest cooling besides air
- Vmod for old vid cards
- Anyway to get my CH5 further?
- I think my pump is corrupting floppy disks
- A crystal clear 9800XT vmod guide...does it exist???
- did n e one watch teh tech tv tonite?
- older nvidia cards & OC'ing
- clockgen = not working?
- ic7-g w/ new BIOS22, more KHX3000 testing
- Recommendations on OCing DFI Infinity
- p4c800-E 5:4 troubles.
- OC lowering Aquamark score.
- SetFSB_HomePage
- Twinmos 43B or 43D???
- How much cooling for OC'ed mem
- Dead 9800xt help
- A64 overclocking probs!
- 8RDA OVP mod. How much of the resister do I have to remove?
- Need help identifing my chips
- FX 5900 Bios Flash
- 9800 XT bios anyone?
- Big Prescott OC's Links?
- 4PCA3+ rev1.1 support P4 3.4C 800FSB ?
- Need help ocing
- 4Ghz? Look Here..
- Ttgi520w Psu 3.3v Mod
- Can't get more than 3.25v vdimm. (vmodded mobo)
- OCZ 3200 PLatinum (BH-6) good or bad??
- Sinking pll and mosfets? 230 not acceptable : /