View Full Version : Xtreme Overclocking
- GPU Bios question.
- dont move cold tubing
- A-Data 4000 just a "hum" of what they can do
- Kingston HyperX 3500 BH-5?
- Best Catalyst for 3dmark2k3?
- What kind of sandpaper do you use to lap your heatsink?
- Radeon OC show off
- What is the next cpu you will buy?
- better overclocker?
- 4PCA3+ NB + 60x25mm 7000rpm 40cfm [pics]
- Ati 9800pro 128mb VS 256mb
- Any OC'd MSI K7N2 Delta-l's?
- 9600Pro overclocking
- Best Nvidia drivers & tools ?
- Corrupt Display
- Setfsb or Clockgen??
- What´s your VDD?
- Vmod IC7-G + A-data pc4000 problems!
- Mushkin pc4000 is on the way
- Need help with PC Power & Cooling PS
- Abit Ic7-max3
- What's faster?
- Best p4 overclocking board
- Muskin 3500 2-2-2 overclock well??
- So Who's the 1:1 King of XS?
- Best MOBO for OCing
- dual durons?
- Settings for SoftFSB and ABIT NF7-S ?
- Any radeon 9800pro out there with hynix ram?
- Best Mobo for Overclocking Poll
- best budget p4 mem/mobo combo?
- Best DDR 500 PC4000
- Which RAM?
- New Nanotherm review article
- NF7-S (rev 2) maxes out at 220FSB
- nf7-s 2.0 already used wth?
- Overclocking The P4
- Need Some Help Plz.
- What did your 9700 pro max out at?
- hyperx strange behaviour
- Max3 finally shipped!
- best i can do
- Heatsink to IHS pressure spec's??
- clockgen/setfsb
- NorthBridge Mounting mechanisms for i875 boards
- P4P800 3D2001 marks go up with higher Tras setting
- IC7-Max3 in stock at Newegg. $225
- dfi lanparty for p4
- good psu at newegg?
- Barton 2500+
- quick help with L12 mod
- noob, need help!
- Ln2
- 3dMark keeps corrupting, WTF?
- ocz 3700 gold vs ocz 4000 gold vs 3500 LL mem
- CINEBENCH-How Fast are You??
- 8rda+ gpu scores running low, elp!
- Prob been asked a gizillion times so heres gizillion and one....
- best vga hsf w/ no modding?
- What is the highest on IS7 & 2.4C
- Max comes home
- How much voltage on a Hercules R9700 non pro?
- radio shack thermal compound
- hit 250fbs!!!!!
- Creative FX5900 Ultra 256MB Clock's locked?
- check out this source demo
- Is it ok to lap water block?
- 2100 or 2600 for 250fsb...
- Thermalright does it right SLK revisted 947
- XXX "dirty" pictures of the 2.4C (must be 18 to view)
- Memtest86 question
- What to trust for cpu temp?
- twinMOS twiSTER PC3200
- Why are pots soo stubborn?
- Hot Hot Hot!
- Which would be better for etreme(ish!) aircooling??
- Replacing the NB cooler - worth it?
- NF7-S V2.0 200*14
- Can someone help me out with these vmods??
- Max 3.3v safe limit?
- every expert available..need help!!!
- For anyone who hasn't seen this (cheap 4.3ns ram)
- 8RDA+ rev. 2.1 high vcore problem :(
- FSB Fluctuation on Abit NF7-S, 220MHz and above
- IC7 MAX3 Memtesting
- ic7-g VDD mod madness!!!
- BGA mem chip resoldering. Xtreme enough?
- help with 8500 mod
- air tight box testing
- The Chip that Wouldn't Quite, 2.8C at 4.337 GHZ
- Abit Ic7 Max 3 Or Max 2
- Is my brother right?!?!
- hacked bios for higher vdimm
- Help :P Question regarding Clockgen
- This is the best i can do with SetFSB
- Temp probes on 9800 \ nb
- Geil PC4000 not running at rated speed?
- Twinmos Twister or Twinmos with Winbond CH-5?
- Enable HT on WinXP/2000
- not a bad 2.4
- help: Mushkin Black Level II - with BH-5 chips
- Rubbing compound after lapping?
- Crucial Memory PC3200 @256fsb
- Blowing L3 bridge with batteries....
- XP2500 + Prometeia
- will shinier things have beter performance?
- Bad 3Dmark 2k3 score with 5900U
- P4 3.0 stepping info, help please
- Are HyperX 3200 BH-5?
- 3 containers, 1 rig
- IC7-MAX3 review
- highest stable fsb with sata raid
- Nf7-s @ 240fsb !
- post your p43.2 oc please
- Upping the CPU core by how much? What levels are safe etc...
- Difficult choice: OCZ PC4000 or Mushkin PC3500 level 2?
- Good news - so far
- Zalman ZM-NB32J and GPU Ram Sinks
- noob - need help :(
- the absolute best hs for oc'ing 462
- help with a7n8x async
- whats the max vdd youve tried?
- Turn on comp today, idling 6c higher and getting audio/video corruption, need help!
- Mushkin pc4000
- 5900 ultra
- CH5: bug evidence
- ocz gold 3700...
- Can anyone OC a radeon 9200/w128mb memory
- club3d 9800se
- help with vdimm mod
- Got the MSI back from MSI today with a little twist
- Ways to remove heat spreaders on Ram
- ATi Catalyst 3.7
- delta@14v=t3h noiz
- Kenneth Chong on front page
- anyone using a p4p800 & adata?
- Wholly schmoltz ! A64 benchies at Anandtech
- Is this a good 9800 OC?
- Antec TruControl 550...
- School me quickly, brothers
- error?
- voodoo pc beats alienware
- Prometeia Mach II users here
- Yet another insane (read fake) overclock !!!111
- When......Prommie + Opteron = Overclock ??
- Is it my RAM?
- tried mushkin pc4000
- kingston hyperx 3500 overvolting review
- Modifying 8rda+ vdimm to 3.3v+
- Albatron KX18D Pro II (Nforce 2), vcore up to 2.65v !?!?!
- agp arpeture size??
- Which PSU should I get?
- Lapped my Epox 4PCA3+ NB, now dead?
- Hyper-X PC3200 BH5 in UK
- Post your max AGP rate
- Opteron overclocking discussion
- NF7-S + HyperX
- Recommend me some RAM
- nvidia software OC?
- 3D Mark 2001 : #2 ASSOLUTO in 9100 <--> #1 in P4+9100!
- chaintech introduces "radex"
- radiator for gpu pelt
- 9800 oc
- What VRAM chips are these?
- Installed new P4c 2.4 and the Vcore options are screwie ! ?
- 5900 Ultra Thermal settings in registry
- got stable rails?
- CPU-Z not posting voltage reading?
- what means 100% stable?
- P4C800-E vcore issue
- amd64 here...soon
- NForce3 Bandwidth
- Burning in Ram-Need Programs and Ideas.
- Crazy French overclocking
- 9800vs5900 in hl2 tomb raider and halo
- Best source for Prometia?
- Who has the highest 1:1 bench!
- VapoChill XE 404a Review
- YAY 3v vdd!
- Worth selling my Vapo PE for a Mach 2?Any plans for a new Prommie?
- Above FSB 312 on a 2.4c
- First waterblock on IC7 NB :)
- Is it safe to run your board on an anti static bag?
- 2.4ghz oced perform better then 3.2ghz?
- Yeay I'm now a member of the no case club :D Questons...
- Geil 3500 default timmings
- My new workbench, vapochilled R9800pro
- Prommy Mach2 results
- Help on Overclocking
- Hercules 9800 oc results!!!
- Tips OC:ing EP-4PDA2+
- New CPU-Z version 1.19b out
- I got a phone call tonight concering my RMA from MSI customer service !
- P4 with or without the IHS?
- How much power does a Radeon 9500/9700/9800 consume? What rails?
- OPP's dead mach II
- ic7-max3 buy or not to buy it
- #fpo/batch??
- Not good. 8RDA booted at 180 FSB NF7-S wont...
- Physical memory dump at 185 FSB and no boot at 11.5 multi? The limit?
- How to get higher FSB...?
- Error Message after a simple overclock... whats the solution??
- 2.4c stable 1:1?
- 240Mhz FSB, How can I get more? :D
- perfect match for your IC7Max3...
- Which 3.0c is the best?
- Nanotherm PCM+ anomalies?
- half life 2 benched!!! rocks on ati cards
- Ahhh Please help w/ OC problem!
- 9700/9800 core voltage
- Vantec Iceberq Pro 4 - Xmicro card - PCM+
- How to fugger up some nice hard drives!!
- Anywhere to get a Maylay???
- My First OC and I'm hooked!
- joined the 4gig club
- Will this rock when overclocking
- CPU speed verification issue with 3dmark score? WTF?
- watercooling
- FINALLY hit 20k!
- Dielectric Grease???
- Best Bang for the Buck cooling.
- 4 ghz with 2.8C
- Anyone with 9700 Pro and 3.6 Infineon Mem?
- windbond hardware doctor temps
- **702mhz 5900 core bench**
- the ram most likely to do cas 2-2-2-5 at 240?
- L337 3dmark 9500 Score
- 9500non pro to 9700 easy
- Bad Corsair PC3500 (BH-5) stick?
- Best combo Swiftech MCX4000 w/ 80mm or 92mm
- My first night of Benching...
- New watercooling rig = lower temps = lower overclock
- Best TNT2 3d2k3 score ever
- Newb-Question: Memory-OC or: What the hell did I do here?
- To IS7/P4P800 and 2.4C user, pls help..
- Unlock 2500+
- graphics card OC?
- Cheap Folder? 1800 DLT3C and ECS K7S5A, 2.2G?
- Abit IC7 Max3 and Geil 4000 a good association
- What brand Radeon 9800Pro??
- Mega o/c with PC2100 RAM!!!
- Phase change + tec ?
- Anyone have a Max 3 running 5:4 at more than 275mhz FSB ?
- 2.8C or 2.6C w/ PC4200?
- Today it's a CO2 day!
- Wath memory?
- Burning in some Twinmos PC3700
- Abit Max3 Help
- am i strange overclocker?
- using riva tuner 2.0?