View Full Version : Xtreme Bandwidth
Pages :
1
[
2]
3
4
5
6
7
8
9
10
11
12
13
14
- ddr2 with ras-cas2 delay(the most important timing for a64)
- Help!:Dynamic Memory Divider
- moved post about best ram
- hey, look at what I just found. X-files' ram?
- Something Interesting With TCCD
- Final Verdict on G.Skill's 4800LA
- speed premium , ready for htt 280 on dfi sli?
- BH5 memory causing artifacts!?
- 2 x 512MB GSkill PC4800LA - Samsung 437
- G.SKILL 512mb LA @ s754
- OPB's New BH-5 records(FSB) on DFI SLI-DR
- Cheap memory
- How low will your ram go?
- PQI PC3200 ! Tempted to get some. Need advice.
- Best Memory NEO2 Platinum
- graphics throttling when oced?
- G.Skill 1 GB of LE 4400
- Just how important is the quality of the Onboard Memory Controller?
- TwinMOS Winbond BH5 or OCZ Gold VX
- Gskills Pc440 works on p4c800-e?
- TCCD vs OCZ VX (or other bh-5)
- Anyone here tried HyperX4300?
- Timings for twinmos memory - help me quick please
- DFI NF4 Ultra w/ TCCD is awesome...
- OH YEAH!!!! 2x256MB BH-5 @ DDR552 6-2-2-2.0-1T on Neo2 / Winchester 3200+
- memtest for nf4 ?
- G.SKILL with heatspreader???
- Waiting to buy TCCD---Well Don't!!
- 4x 256(SS) or 2x 512(DS) w/ E0
- 2x512mb g.skill LA kits at newegg
- The Inquirer reports TCCD will be discontinued???
- Which memory...
- Quick Review: G.skill Low-level pc3200 2-3-3-6
- Who said Gskill LA 1gb doesnt perform?
- TCCD Memory Isn't Dead -- Yet
- OCZ 4200 plats vs 3200 plats rev 2
- Twinmos 512MB newegg link needed
- Advice please! I own TCCD, have a chance to get BH-5...
- Best ram for 260 2-2-2?? VX, BH5??
- Question about 3500+
- Does TCCD benefit from burning in?
- OPB Broke self Bandwidth record again
- AMD/Intel IPC related questions
- My Corsair PRO
- GSkill 512LA or 1024LE
- Patriot XBL+DFI NF3...my quest for 310 FSB! Help needed.
- My VX are a "sucky pair" ?
- OCZ Plat Rev2 or Gskill ? what diff LE/LA/LC ?
- Are these sticks BH-5?
- Searching Ram for A8N SLI dlx !!
- burn in to long, errors return?
- Centon Ram
- Ram for a 3000+ Winny
- anyone hitting ddr600 on intel boards ? 875 is what I have
- heads up theres a new sisoft out
- Brainpower and TCCD
- Vx got problems with dividers ?
- OCZ 3500 Platinum LE BH5 in the UK!!
- Adata 4800 512x2 TCCD - 440 & 443 ??
- best timings for hiperx memory 3200
- Samsung E-TCCC + BP - Any1 tested?
- 1gig kit of g.skill LA = 150$ @egg ?!
- what is the best week g.skill 1024?
- Noob Alert!!! Noob Alert!!!
- Winbond DH-6 ??
- Any problems with TwinMOS UTT 44D and Via K8T800 chipset??
- Help!!! I can't find GSKILL TCCD anywhere.
- Ram at 270mhz, with the best timings?
- G.Skill LA : Improvement of my own bandwith record !
- 2x512Mushkin pc3500 level 2 worth buying
- 2x512 Gskill L?
- DFI NF4-D +BP 815 pcb based memory - HOW DO YOU GET INTERLEAVE TO WORK over 250 FSB?!
- 1GB Geil Ultra X (TCCD) @300Mhz 1T 2,5-4-4-9
- NF3/NF4 & TCCD - Highest stable clocks - REPORT IN !!!
- The Egg has G.skill 512MB x 2 of LE & LA in stock as of 6:20PM PT Feb-15-05
- Ballistix - bandwidth king?
- GSKILL DDR400 Cheaper Module Testing Report(2.5V DDR500 Finished)
- OCZ VX Burn-In
- GSkill - !GB - LA - Two types- What is the difference?
- bandwidth fluctuation
- Can a Gig of BH-5 overclock and handle 1T like VX/UTT can?
- Should I wait? Or Do the mad rush?
- weird....
- Max safe voltage for GSkill PC4400LE???
- TCCD 449 dual kit with different PCB's?
- can some 1 run a bench for me
- IS this TCCD?
- DFI Loves BH6
- Gskill LC 1G
- BH-5 and DFI Ultra-d questions
- What is wrong with PDP?
- PQI Turbo 3200 Platinum cas:2-2-2-5
- Whats the best Tras for Nforce4?
- dfi sli ocz3500eb
- There it is! BH-5 is back again!
- Need some help...
- How're my timings looking? (bh5)
- Working with my XBL
- G.skill Dual Pc550 F1-3200dsu2-1gblf ?
- DFI NF4 / BH5 @fsb 500 !!!! WR ?
- A Question About This Magical Twinmos Memory
- UTT vs TCCD
- How is this for DDR500?
- Max safe 24/7 voltage for VX?
- What CAS, tRP, and all those others mean
- DDR 1000 Mhz ?!
- opinions on this memory
- twinmos UTT owners, please take a look
- TwinMoss SP vs Normal
- UTT on low voltage?
- Kingmax superram?
- 2x512 285mhz 2-2-2 only 3.4v
- GeIL Ultra-X "overclockingthread"
- Memtest86/burn-in guide?
- Exploring DFI NF4 U with BH5
- WR bandwith with bh-5 is ... ???
- Need recommendations for new ram
- Ram timings help
- DDR-2 Timings help
- OCZ releases Gold VX PC4000!
- Help BH5 DFI Ultra D NF4 settings
- 4 X 256 G.Skill + A8N Sli = known issues ??
- Please help stabilize GSKILL LE at 313mhz.
- memory timings w/A64 article suggestions needed
- little problem with bh-5
- G.Skill speeds are guaranteed to Intel platforms?
- Checking if anything needs fine tuning with my Gskill LE+DFI NF4?
- Gskill 4400LE on 3.2E INTEL P4C800E-Dlx OC Results....
- G Skill 4400Le needs 2.8v for 250mhz?!?!?!
- change an OCZ ddr booster part.
- FX-55 and G.Skill LA's can't go above 220MHz
- Any chance this is BH5?
- Value VX
- GSkill 1gig LE kit issue on MSI Neo2 with A64 3200+
- What IC's are on PDP1GB3200LLK
- 9.4K Sandra Mem. w/ Gskill LA
- OCZ DDR1-772 3-4-4!!! | Time for OPB to show what best TCCD can do with CAS 3.
- Best sub 350$ (2x512) mem
- ddr1 vs ddr2 bandwidth
- Quick question ram sinks
- Can I borrow 119mb/s bandwidth from you guys
- Please confirm this for me
- Prime95 Testing
- 512 faster than 256?
- How to squeeze more out of my Gskill PC4800LA?
- A64 3000+ @ Gskill tccd
- Did I get some crappy Gskill LE?
- Tref ... bandwidth 100% dependant?
- need help [TCCD] can't reach the old freq.!
- a64+bh-5/ch-5 utt + ddr booster + k8n neo2 plat.
- Best Gskill... 2x256, 2x512... LE, LA...
- TwinMOS UTT won't run with divider?
- 2x512 or 4x256??
- 2x512 OCZ VX & 3400+ CH results
- corsair question
- nf3 vs nf4 memory OC
- Gskill PC4400LE issues
- What causes ram to pass memtest booted from cd but not in Windows??
- So many hard choices... which will it be??
- I need a screen shot of A64 tweeker 2x256 tccd on dfi nf4
- Ocz 3200el R2
- what about 1Gb Modules?
- Here it is! Winbond DH-6!!! (I *swear* this is not a joke!)
- khx4000 how well it clock?
- GSKILL 4800LA or 4400LE to hit higher FSB?
- Ddr 666
- XLPT oc result: so amazing
- Nothing impressive , but i'm happy :)
- Need info on hynix b
- Efficient Bandwith
- ocz 3700 platinum tips/feedback
- OCZ PC4800 Platinum EL Limited Edition - JUST RELEASED
- well, 10332 mb/s will be my best ever.
- DDR - Need some help what I should buy -TIA
- How I know if my memory it's BH5 or CH5 ?
- p4s533-x
- Is the problem my G.Skill "LA" or Winchester mem controller?
- G.Skill died on me? :?
- Winbond UTT's doesn't work with AS8
- Where to get A64 Tweaker?
- Great OCZ Plat rev 2@309mhz
- Burning in OCZ VX
- What this numbers means on my memory.....
- Anandtech reviews OCZ VX PC4000!
- Last call: G.Skill LE vx. OCZ VX
- Someting smelly going on here
- A bit disapointed in my new GSKill LA sticks
- Just got my VX PC4000.
- Average Voltage You Need In Your TCCD Ram To Hit Your Limit
- is this bh-5?
- How to cool BH5?
- ...thinking about getting some Twinmos RAM
- Anyone has problem with OCZ VX PC4000 & DFI NF4 SLI-D?
- A-DATA Vitesta DDR566/600?
- Memory poll, OCZ or gskill?
- Memory poll, OCZ or gskill?
- Darned GEIL utraX DDR400 !!
- Ddr760
- G.Skill: world’s first Guarantee DDR600 PC4800 1T Memory
- What's the best ram I can buy for $400 range?
- 3.3 volts DDR on IC7 Max 3 ?
- GSkill LA - Weird Problem
- Anyone compare VX/UTT/BH-5 at similar speeds/timings?
- TCCD @ 2-2-2-x?
- GSKILL 512 LA still can't hit 300 1T on DFI Ultra D!!
- Secrets to hit over 300@1T on MSI Neo2 Plat
- Dual channel kit
- Low latency, HIGH HTT, who wins??
- VX or TCCD for stable OC?
- OCZ EL DDR PC-4800, anyone checked these out ?
- anyone ever got bh5s to 292 ? at any timings ? with 3.3-3.6v ?
- OCZ Booster with K8N SLI board question???
- Would this really hurt OCage?
- Best bios settings for utt on dfi nf4?
- GSKILL TCCD or GOLD VX UTT
- Post your WORKING timings and voltages for DFI NF4 Ultra-D and SLI
- Got my first BH5 memory... Did I make a mistake?
- Finally got 9K in Sandra on stock single phase with my old NEO2.......
- Questions regarding my VX ram
- What PCB are UTT chips using
- G Skill reliability
- 3 differnt types of UTT!?!?!
- G Skill Burn in?
- Does nForce2 hinder memory performance greatly?
- Are some UTT's in my future?
- G Skill LA fails memtest @290 Help please
- Memory pros help!!!!!!!!
- best ram for intel 875 ? 275+ fsb
- BH-5 not cutting it for me
- Anyone have experience with CH-5
- OCZ Releases Titanium series
- good 1x512mb ram for amd64?
- what chips this memory have
- DDR666 CL2.5 4-3-7 can run PRIME95?!
- Newegg stocking Value VX!
- What memory would I get?
- More G Skill problems help please.
- 1g lv2 bh-5 279x9 w/ winnie
- OCZ DDR Booster compatibility
- very predictable vx errors ?
- Twinmos speed premium & INTEL mobos...
- Another "What RAM should I get?" thread
- What did i mess up ????
- VX 4000 @ NewEgg
- 31.8 lat. on Everest
- This memory better then VX or not?
- Where are the G-Skill's 4800FF?
- Higher 1T clock after burin in?
- Corsair XLPT pass DDR 680 cas 2.5 on DFI nf4 Ultra D.
- I need more bandwidth, help me