DFI CFX3200DR+Team Group BH5 and TCCD= unbeatable match-up

[kk228]

Guys, being struggle couple days since I got the CFX3200DR, I almost just wanna give it up. Just could not do any :banana::banana::banana::banana: over DDR 500 with my name brand of bh-5; so I emailed OPB about if he can provide me any tips with that.after reading his suggestion, I bought 1 set of "Team group" bh-5 pc4000 and TCCD, I am not hardcore OCer like him, and there are what he taught me to do:
Besides this, I also got a special solution or secret from OPB; it just got the difference like :
super pi 8m same speed and setting: at least 20 secs
32m at least 90seconds.
Well, without his permission, I can't just post here, sorry.
you guys can check out the dfi-street ; there are lots of folks still no idea about why .

http://img49.imageshack.us/img49/5227/tgtccd600p8m5zx.jpg

http://img49.imageshack.us/img49/53/ddr5008mf2pw.jpg

http://img92.imageshack.us/img92/5166/teamddr500b32m2ec.jpg

http://img49.imageshack.us/img49/5930/bh532mf9ov.jpg

I know , it is a lot ;) but I am really certain that is not l"system large cache.

and finally is the TCCD; i never thought I can do this, even 2.5-4-3

http://img49.imageshack.us/img49/1987/teamddr500a4ks.jpg

http://img49.imageshack.us/img49/1554/tgtccd600p32m3id.jpg

[ahmad]

Woah. 251MHz at 2-2-2-5 is nothing short of amazing with TCCD. The highest I could achieve was 223MHz or so.

[cMw]

Woah. 251MHz at 2-2-2-5 is nothing short of amazing with TCCD. The highest I could achieve was 223MHz or so.
yea thats seriously amazing for tccd

nice results :fact: ;)

[Lane-k]

It's perfect, i play buy this mobo and i will get team Xtreem Bh5 normally this week ( in command).. i m glad see this board is a good bet with Team Xtreem DDR..
For TCCD the max i can get at CAS2.0 is actually 2-3-3-6 at 256mhz. but the result you have..nice.. fully stability test passed ( OCCT, SP2004 5h large FTT), but i need increase a lot the voltage, but i will bet is cause the Expert DFI don't like at all the TCCD600....
a screen of my timings with OCZ4800 at 255x12: the problem is the voltage.. more of what can be safe with TCCD..( hopefully i have place 3 fans for active coolings close to the DDR ( one upper, one on back and one behind..)
http://img263.imageshack.us/img263/7922/sanstitre30fz.jpg (http://imageshack.us)

I begin ask me if i will not update my command with team Xtreem TCCD600 at the time i fget the DFI CFX3200 ( some week to wait before shop have the board here.. hmm i need say the only shop sell them...)

For what i can see this board like UTT-BH5 aswell TCCD600.. this board is certainly the best made by DFI !!

[zungkono]

@kk228 : its great that ur tccd can do 2-2-2-5 251mhz
but can you give/show A64info ?

cause I found weird thing here :
http://www.xtremesystems.org/forums/showpost.php?p=1416128&postcount=87

[thunderstruck!]

I don't see any tccd 2-2-2-5 at 251mhz, that's bh5-utt. the only tccd shot i see is 300 2.5-4-3-5. You guys are jumping to conclusions.

[ahmad]

I don't see any tccd 2-2-2-5 at 251mhz, that's bh5-utt. the only tccd shot i see is 300 2.5-4-3-5. You guys are jumping to conclusions.

oh. :stick:

:p:

[impression]

oh man, i hope OPB decides to teach us this little secret of his :D

[don_vercetti]

oh. :stick:

:p:

It does say it's TCCD above it, but then check out the volts. Anyone pumping 3.2v into TCCD would be pretty foolish, and they would gain bog all.

[shuRe]

250 at 3.2 volts is still pretty good tho?

[jrw]

250 at 3.2 volts is still pretty good tho?

I need 3.36 on my GSkill GH to do that... :)

[TaPaKaH]

How `bout 280MHz 2-2-2-5 on TCCD ?
http://images.people.overclockers.ru/59318.png
It`s TCCD @ 3.55V !!! (with clown subtimings and without any performance modes whatsoever)

P.S. that didn`t last long ... after about 2hour benching a 1GB kit was killed...

[zungkono]

How `bout 280MHz 2-2-2-5 on TCCD ?
http://images.people.overclockers.ru/59318.png
It`s TCCD @ 3.55V !!! (with clown subtimings and without any performance modes whatsoever)

P.S. that didn`t last long ... after about 2hour benching a 1GB kit was killed...

is that true tccd ? no volt reading in the image :)

[kk228]

@kk228 : its great that ur tccd can do 2-2-2-5 251mhz
but can you give/show A64info ?
&postcount=87[/url]

Hello! Zungkono! I think the most important thing here is not how high FSB can go, the most important thing here is the different performance of frequency before OPB told me and after he told me....:)

[Onepagebook]

ya, I am pretty sure that I won't tell user to give to much juice to any Made in Korea type module:p: even over 2.85v:slap: :D

Well, I tried 4 tccds and 4 UCCC before I went to Florida trip;
UCCC I can get up to 313mhz for 16m completely stable; tccd , honestly I just could not even hit 2.5-3-3-x over 295mhz..weird, but can do over 320 + with tccd..
BH5? ha, secret, 275mhz..2-2-2-5 below 3.75v is piece of cake;)

secret? there is one driver cost you dang slow float-point calculation. that's why.;)

[s7e9h3n]

BH5? ha, secret, 275mhz..2-2-2-5 below 3.75v is piece of cake;)

http://cryo-laboratory.com/upload/userfiles/s7e9h3n/Opty%20154/13x2751m.jpg

I need some tccd now :p:

[jrw]

secret? there is one driver cost you dang slow float-point calculation. that's why.;)

Which driver is that?

[gigi77]

ya, I am pretty sure that I won't tell user to give to much juice to any Made in Korea type module:p: even over 2.85v:slap: :D

Well, I tried 4 tccds and 4 UCCC before I went to Florida trip;
UCCC I can get up to 313mhz for 16m completely stable; tccd , honestly I just could not even hit 2.5-3-3-x over 295mhz..weird, but can do over 320 + with tccd..
BH5? ha, secret, 275mhz..2-2-2-5 below 3.75v is piece of cake;)

secret? there is one driver cost you dang slow float-point calculation. that's why.;)

WOW:slobber: