asus p5n32-sli/w D940

[framesX2X]

hi guys


just getting started playing with board.
I no thing about overclock, Mmmmm maybe 5%

but this is My Rig
Asus P5N32-SLI w/D940 /bios 0308
Corsair 5400c4pro 4x512
Raid 0 160x2gb
Msi nx7800gt x2 in sli model
X-fi sd cd 7.1
Vapochill LS
Win Xp sp2
Apple cinema 23”
BF2 sp runs like crazy, very fast
Water block on both card / and chip set S / N AND
Water block on both of my phase power module’s

http://valid.x86-secret.com/show_oc?id=82869

[PcCI2iminal]

:eek:


can you bench your system and show us some 3d action ?


congrats man

[framesX2X]

yes!

This is the old 3Dmark05 score 11065

I update to 1.20v score is 10976
http://service.futuremark.com/compare?3dm05=1920903

I need some help to setup My Rig the right way.

i did OC to 5gh but win Xp blue screen..
400hz % 1251 fsb 312.75 148.5v

My Rig: info
Asus P5N32-SLI w/D940 OC 4.4 GHz / Bios 0308 Corsair 5400C4PRO 4x512 NVIDIA Raid 0 298 GB Msi NX7800GT x2 in SLI model w/water blocks Vapochill LS Full Load -37c / & Water Block on 8 Phase Power module’s DVD 6.1 all in one/ X-Fi prem /Logitech THX 5.1 Speaker set / ZBoard 23" Apple Cinema HD / Zelman 5.1 Headphone Set / Logitech Extreme3Dpro Win Xp SP2 / BF2 sp /euro 1.22v. Drivers: 84.20 / chipset driver 7.15 all other Drivers are update. Below is OC 4.5 GHz test, still testing this Board to see how far it can go. http://valid.x86-secret.com/show_oc?id=82869 Old 3Dmark05 score was 11065

[vanovich]

taking that your using that mb ,its actually the best oc ive seen in sli,so congrats on the oc .have you tried giving the cpu a bit more vcore ,i have simmaler system just difrent mb and running 315-320 benchable. heres a 05 score with one ati 1900xt .http://service.futuremark.com/compare?3dm05=1800572
do you have any 03 scores,as nvidia is stronger there.

[framesX2X]

thanks.

i'll download it tonight


yes i set my vcore to 1.5v, it more stable now.
? Q , If i try to oc to 4.7ghz what best mem timing to use.

[SoulGG]

Yeah that is nice for the p5n32...That board got so many bad reviews

[PcCI2iminal]

Yeah that is nice for the p5n32...That board got so many bad reviews

this oc is very nice


i used an old P5ND2 + Smithfield and soo many crashs/BSD trying to OC

[Blacklash]

That is nice, and I read reviews that had this board as an average overclocker.

I was interested in the ASUS P5N32-SLI Deluxe because it is a true 16 x 2 SLi board.

Anyone else had good luck overclocking the ASUS P5N32-SLI Deluxe motherboard?

I was thinking about the ASUS P5N32-SLI, a 940 or 920 and some Mushkin Extreme 2GB (does 3-3-3-10)

[nettwerk2006]

Water block on both card / and chip set S / N AND
Water block on both of my phase power module’s

What blocks are you using on the chipsets and mosfets?

[framesX2X]

custom may block, some pics

[nettwerk2006]

Thanks for the pictures!

The maximum that my board is stable is 253FSB x15multiplier.
Everyone always says watercooling the chipsets is waste, but if you're able to get that high is most likely a result of it. Your tubing looks very small in diameter, not sure i could pull that off with 1/2"

I didn't see the block for the Mosfets, I noticed that you still had your passive heatsink/pipes still hooked up, did you just cut the heatpipes off elsewhere or something?

[framesX2X]

hi
the passive heatsink/pipes is setup with waterblock both together as one block
temp at full loard is 17.5c. on the chipset the waterblock its 3/4 tubing just about 4.5" long, then it to a 5/8 tubing pump. The Temp on its also 17.5c at full load.
PS temp at full load 34.5c about 295w from a 650w .

the complete system very stable. My OC its now at 4.5ghz vcore 1.48v fsb 1125 / 281.2
the vapochill ls at full load -37.5c.

also a good PS 650w or more will keep the Very Stable..anything lower then 650w the will become unstable

[cjc_75]

I recently got a P5N32-SLI Deluxe to use with my D830. Im not 'extreme" by anymeans ( 3.8~ on air). The motherboard for some reason does not like to hold the BIOS settings at times. And, although I'm perfectly stable, after most voluntary shut downs or reboots I have to log in through setup ...sometimes resetting to the OC, or just needing to run through setup with nothing changed. Seems odd to me.

The other thing I noticed, with 1.4V Vcore, I tend to droop down to mid 1.3's very often, and some high 1.2's sometimes. I use a Antec Trupower 550W with 1 optical drive, 2 HDD and 2 7800GTX in SLI, some overload perhaps? +3.3 = 3.26 , +5=5.08, +12=12.08 as recorded by PC probe.

How much Vcore can the 830's handle on air? Currently, I'm 52C~ under full load.

[thecoldanddark]

I would say its quite possible its an overload, someone with more expertise than me speak about this though.

[framesX2X]

I recently got a P5N32-SLI Deluxe to use with my D830. Im not 'extreme" by anymeans ( 3.8~ on air). The motherboard for some reason does not like to hold the BIOS settings at times. And, although I'm perfectly stable, after most voluntary shut downs or reboots I have to log in through setup ...sometimes resetting to the OC, or just needing to run through setup with nothing changed. Seems odd to me.

The other thing I noticed, with 1.4V Vcore, I tend to droop down to mid 1.3's very often, and some high 1.2's sometimes. I use a Antec Trupower 550W with 1 optical drive, 2 HDD and 2 7800GTX in SLI, some overload perhaps? +3.3 = 3.26 , +5=5.08, +12=12.08 as recorded by PC probe.

How much Vcore can the 830's handle on air? Currently, I'm 52C~ under full load.


dude get 680w ps and and then you OC and be stable. And the reset of bios is low PS, this require you to us a 650ps and above " NO less"