LittleDevil SS Worklog

[LittleDevil]

I asked Jinu117 to change me title of that thread. On that thread i will post all my SS units, modifcations....etc

Here are my old builds:

-Osckhar's Black Single Stage (http://www.xtremesystems.org/forums/showthread.php?t=119191)

-Mach II Modded (http://www.xtremesystems.org/forums/showthread.php?t=120138)

-Moonman's GPU cooler (http://www.xtremesystems.org/forums/showthread.php?t=108475)

-Mach2 GT modded by LittleDevil (http://www.xtremesystems.org/forums/showthread.php?t=108080)

-DaCoSa's Single Stage (http://www.xtremesystems.org/forums/showthread.php?t=116140)

-LittleDevil's V2000b (http://www.xtremesystems.org/forums/showthread.php?t=117375)

-Small unit for my friend (http://www.xtremesystems.org/forums/showthread.php?t=96370)

-New phase change (http://www.xtremesystems.org/forums/showthread.php?t=92088)

-Single Stage (http://www.xtremesystems.org/forums/showthread.php?t=90327)

-Black SS MP14FB (http://www.xtremesystems.org/forums/showthread.php?t=106071)


Here are some pics of my units:

http://ld-phasechange.com/images/MetalicBlack_SS/4.jpg

http://ld-phasechange.com/images/MetalicBlack_SS/1.jpg

http://ld-phasechange.com/images/J0d3r's_SS/19.jpg

http://ld-phasechange.com/images/J0d3r's_SS/21.jpg

http://ld-phasechange.com/images/J0d3r's_SS/18.jpg

http://ld-phasechange.com/images/GrinTomato's_SS/14.jpg


tnx

[GuuZ]

looks nice and really clean :clap:

any further specs?

[LittleDevil]

The gas is R402a, captube 0,7mm... I'm vaccuming now, temps will be later...

tnx

[Jort]

sure the fan is placed right? your pushing he air true the front of the condensor now.

again great work like the previous one ;)

[the_new_guy]

amazing dude,

[Brettbeck]

LittleDevil your single-stages look awesome!

[4Qman]

Mate that looks sweet as, Cant wait for some ICE'y Pics :D

[ayrtonsenna]

sure the fan is placed right? your pushing he air true the front of the condensor now.

again great work like the previous one ;)
no its pulling air through the condensor.

[ayrtonsenna]

:slapass:

[ayrtonsenna]

:slapass: my bad...............i see now the fan is the wrong way round.

[GuGaCoSa]

Looking very good,regards
ayrton,wanna go to 100 posts?hehehe

[ayrtonsenna]

Looking very good,regards
ayrton,wanna go to 100 posts?hehehe
lol....no!! just messed up with the submit and edit buttons.:p:

[LittleDevil]

Some new pictures...

Unloaded...

http://www2.shrani.si/files/picture0368600.jpg

Bios Opteron 146 3000Mhz 1.64V

http://www2.shrani.si/files/picture0368601.jpg

Idle Opteron 146 3000Mhz 1.64V

http://www2.shrani.si/files/picture0368611.jpg

Load Opteron 146 3000Mhz 1.64V

http://www2.shrani.si/files/picture0368612.jpg

http://www2.shrani.si/files/picture0368613.jpg

tnx

[Kant]

Amazing :woot:

[Hugo van Dijk]

Awesome SS LittleDevil

Looks very clean, and nice temps. :slobber:

[Nordling]

Excellent system! And what it's cost price for you?

[Jort]

don't ask prizes on the forum m8, just PM him.

[Nordling]

Jort
DONE :)
But why not here?

[LittleDevil]

More units... :)

http://ld-phasechange.com/images/single-stages/Picture%20011.jpg

http://ld-phasechange.com/images/single-stages/Picture%20003.jpg

tnx

[Jort]

Jort
DONE :)
But why not here?

if the prize change's other people will say hey i got it more expensive ....

allways ask a prize true pm, clean and easy:)

[Nordling]

Jort
all right! man ;)

[bazx]

hi LD what psi or bar is the 402a @ with the comp running?

baz

[ayrtonsenna]

More units... :)

http://phasechange.extremecooling.net/littledevil/single-stages/Picture%20011.jpg

http://phasechange.extremecooling.net/littledevil/single-stages/Picture%20003.jpg

tnx
syncronised ss.:toast:

[Ad1tya]

Why so many units? :P.

[Skinny13]

nice one

what's the length of the cap tube? 0.031" ?

[Jort]

230 0.028 afaik

[LittleDevil]

bazx idle -0.1, load about 0...

tnx

[Nordling]

bazx idle -0.1, load about 0...

tnx
http://www.nordling.jino.ru/forum/images/smilies/fghfghfg.gif
Not badly, but expected the best result!

[LittleDevil]

Nordling idle -0.1bar, load about 0bar... pressure not temp ;)

tnx

[Nordling]

I understand, not the fool... But it is not enough, though considering gas and the compressor...

[quintus]

wanna see the top of the cases too...
hey dude u make them too clean, i dont like them j/k!
greetings,
q

[LittleDevil]

http://ld-phasechange.com/images/another%20one/Picture%20036.jpg

150w resistor load...

http://ld-phasechange.com/images/another%20one/Picture%20023.jpg

tnx

[K404]

that/those are exceptionally clean, and perform well too. Well impressed :)

[LittleDevil]

Finished unit... Waiting for golden frosters :)

http://ld-phasechange.com/images/cases/Picture%20048.jpg

http://ld-phasechange.com/images/cases/Picture%20047.jpg

tnx

[Nordling]

Ideally! excellent! The best that I see! http://www.nordling.jino.ru/forum/images/smilies/v.gif http://www.nordling.jino.ru/forum/images/smilies/uiff.gif http://www.nordling.jino.ru/forum/images/smilies/ertert.gif http://www.nordling.jino.ru/forum/images/smilies/qeqwe.gif http://www.nordling.jino.ru/forum/images/smilies/fghfgh.gif http://www.nordling.jino.ru/forum/images/smilies/ertet.gif

[404Power]

WTF! :slobber:

How are you able to make such awesome cases? o.O :eek:
This is just extreme! :D
Plz tell me about the cases! :D :)

[Jort]

he's got very good friends :p:

[bazx]

every thing is in the detail with a good job

[[XC] gomeler]

Wow what a beautiful case! Would you mind sharing where you get those compact condensors? They look amazing and help cut down size considerably. A link/email address would be great if you have it for the source of those condensors.

[ICE COOL]

nice job dude, but what is the material for your case.

is that aluminium? what is the thickness?

ICE COOL

[LittleDevil]

No thai in not aluminium it's stainless, 1.2mm thick...

tnx

[LittleDevil]

I have them on stock now...

http://ld-phasechange.com/images/cases/Picture%20043.jpg


tnx

[Hound]

wow, very nice clean looking units, nice performance too

not sure if you have said this or not, but are they NL11F's ?

[Jort]

lazy mofo, i don't understand you dare to ask this question!!!

2 page's ffs

[Hound]

dude, i just reread the 2 pages, i asked the question because it doesnt say. now excuse me for being a noob and not reading pictures, but they dont seem do have letters, ffs, cut me some slack

[Jort]

relook at the pics and notice the NL11F...

[Xeon th MG Pony]

well I hope you got your dose of snobery you needed, I too looked at the photos and after seeing how obscure and blurry the magic number was I concluded that you're upper post was a perfect example of how NOT to treat some one, WTF? I had to shove my face up to the monitour on the clearest pic to be "just" barly able to read the lable.

a simple yes or no would have surficed.

To answer your question hound, from what I was barly able to read on the fuzy picts he so heralds as the source of all clear info Yes they are.

[LittleDevil]

Two almost complete systems...

http://ld-phasechange.com/images/single-stages/Picture%20004.jpg

http://ld-phasechange.com/images/single-stages/Picture%20005.jpg

tnx

[ayrtonsenna]

mini production line, something we all aspire to here but only a few will achieve.
littledevil you have my upmost respect as do a few others.:clap:

[n00b 0f l337]

Very nice. I wish I could get cases like that. :(

[Brettbeck]

Those units look brilliant! Keep up the good work!

[Cranox]

That are very nice , sexy units u got there LittleDevil ! :clap:

[Hound]

xeon, thank you for something useful, friendly, and also: an answer lol, no hard feelings jort, maybe i have my res too high or something (no joke, not taking the piss out of you)

[Big SturL]

Damn, those must be nicest chillers I've EVER seen! 2 clean, 2 pro!

[jtlee75]

how do I get one??

[LittleDevil]

Some new pictures...

http://ld-phasechange.com/images/production_line/1.jpg

http://ld-phasechange.com/images/production_line/2.jpg

tnx

[Revv23]

are those evaps made by you?

[Ssilencer]

Really nice and clean buildings there, nice cases too!
Maybe you can use a tighter armaflex hose on the suction copper tube?

[LittleDevil]

Yes i have now 10 x 15mm armaflex hose...

BTW: Ssilencer any updates...

tnx

[Mr. Popo]

OMG those pics inspired me to design my own ss and mass produce it! :woot:

[Athens[2004]]

Close up to perfection as always mate

[kayl]

Littledevil you have been a busy man havnt you.:toast:
little devil do you have someone else make the evaps and cases for you

[LittleDevil]

little devil do you have someone else make the evaps and cases for you

No, i make them...

tnx

[LittleDevil]

Really nice and clean buildings there, nice cases too!
Maybe you can use a tighter armaflex hose on the suction copper tube?

They will be better with temp controlers for sure ;)


tnx

[Jort]

OMG those pics inspired me to design my own ss and mass produce it! :woot:


yeah :rolleyes:

c'mon what is this all about? i am getting tired of this:slapass:

lets ALL do Phase....

[Mr. Popo]

What I want to know is... How can I make sexy cases like yours? :rolleyes:

[lawrywild]

Finished unit... Waiting for golden frosters :)

*sweet imgs*

tnx

X or Xe?

[Ssilencer]

X or Xe?

Another ones... :D
We are waiting for some things to be done, I will keep you updated by msn.

[LittleDevil]

What I want to know is... How can I make sexy cases like yours? :rolleyes:

You can buy them from me...:)

tnx

[Xeon th MG Pony]

I manufacture and produce my own insanity! :D It's not for sale though, it's priceless :lol:

[Mr. Popo]

You can buy them from me...:)

tnx
I dont need a case... I just want to know how to make them...
I noticed its just two "halfs" of a case connected with two plates on the sides...
Look great :cool:

[ayrtonsenna]

You can buy them from me...:)

tnx
you got pm littledevil.:)

[LittleDevil]

Finally...

http://ld-phasechange.com/images/golden-frosters/3.jpg

http://ld-phasechange.com/images/golden-frosters/2.jpg

tnx

[DeNs]

The perfect addition to a very nice single stage. The owners will be very happy.

Nice clean work mate :)

---dens

[Ssilencer]

I'm happy you got them!
They will look great in your units! :up:

[LittleDevil]

Updates...

http://ld-phasechange.com/images/production_line/5.jpg

http://ld-phasechange.com/images/production_line/6.jpg

tnx

[ayrtonsenna]

lookin' good littledevil.

[Ssilencer]

Nice :D

[Jort]

lovely controller but i don't like the faceplate on this unit.
It's a fine case but that plate ruins the front.

just my tought, every taste is different:)

[Sneil]

i like the face plate, gives it a real professional look.

[MeltedDuron]

I have to agree with Jort here, personally I'd like to see the LCD behind smoke plexi, like on the Mach2 Lian Li kit, as it looks more proffesional IMO. Nitpicking aside, great work littledevil :toast:

[Carlz0r]

I think if the face plate was part of the unit instead of just being glued on it would look better.

[Ssilencer]

Well, you are right Carz0r, but you have to remember that we can't ship cases as face plates, lol! at least not included in the package!!!

Also, I think it's a good solution for that people that cut the holes for displays with his teeth, not the case of littledevil, but you can see a lot of "ugly holes" around

[s7e9h3n]

Also, I think it's a good solution for that people that cut the holes for displays with his teeth....
LOL :toast:

[kayl]

they look nice there littledevil:toast:

[LittleDevil]

Tnx guys :)

I will make some pics without faceplate soon...

tnx

[Ssilencer]

Well, face plates are included for free, so, if people don't like them, no problem, I just try to ad something usefull.


Keep up the good work!

[Flexkill]

How anyone can have anything negative to say about this work is insane!!! Awesome job LD....I love it:woot: :clap:

[hawaiiparty]

yours units are lookin' so good...are you using chilly1 evaps? and did you charge all these units with r402a?

[LittleDevil]

They are all charged with r402a, i'm not using chilly1 evaps...

tnx

[hawaiiparty]

so what type of evap are you using? where can i find pics of these?

[hawaiiparty]

thx littledevil...

[Ekren]

Omg
Nice!

[Mankz_91]

who much for one?

[Tello]

One system for me !!

[LittleDevil]

For more information PM...

Nex week black and red case :banana:

tnx

[LittleDevil]

Load test on PC...

http://www2.shrani.si/files/img3485570639.jpg

tnx

[IvanAndreevich]

Dude these are so clean it's incredible. Congratulations! Too bad you aren't in Canada, I know lots of people who would buy (including me)

[DonS1mpson]

Your work looks amazing, I can't wait until I've saved up enough :(

[LittleDevil]

Power consumption...

http://ld-phasechange.com/images/power_consumption/1.jpg

After one hour...

http://ld-phasechange.com/images/power_consumption/2.jpg

tnx

[Tello]

And only your PC without SS ?

[LittleDevil]

My right now on BOX cooler:

DFI NF4 Ultra-D, Opteron @ 2950Mhz @ 1.520V
Geil Ultra-X 196Mhz 2.2.2.5 @ 3.1V
OCZ PowerStream 520W
Sapphire X300SE

Idle: 125W
Load 184W

tnx

[ludeboy12]

wow readin this thread kinda makes me sad i sold my vapo LS.....but then again maybe that means i can get me a real phase this time around.

great work man

[LittleDevil]

Sry for bad pics... :D Golden froster connected to pc, compressor... All works fine (software)... I really like it :banana:

http://ld-phasechange.com/images/Picture%20139.jpg


tnx

[Apotheosis]

Simply awesome work there LD.:toast:

[twisted5]

Nice work LittleDevil! Not only do they look great but the function very well! Keep it up.

[LittleDevil]

Tnx man...

Here are two painted units for XS members :)

http://ld-phasechange.com/images/production_line/8.jpg

tnx

[Suffocation]

how high are those units, in cm ?

[LittleDevil]

23cm or mybe 23,5cm

tnx

[NapalmV5]

very fine work.. kudos!

do u think getting 1 to the usa with 0 damage possible?

[epox4life]

Shipping to US would probably be crazy money.

[[XC] mysticmerlin]

Shipping to US would probably be crazy money.

no extreme money! :banana:

Nice boxes bud! :clap:

[LittleDevil]

Those compressors needs 220V for running, and shipping to US is expensive...

tnx

[LittleDevil]

Is it better without faceplate...

http://www2.shrani.si/files/picture0610421.jpg

[Jort]

you got a brother in belgium ales;)

http://www.belgium-coolingsolutions.be/Pics/phase-change//custum_phase-change/DSC09166.JPG

going to let it rest overnight and charge it. the buyer is comming over tomorrow and will bring his rig too.

grtz,

Is it better without faceplate...

http://www2.shrani.si/files/picture0610421.jpg

mutch better!!!!!!!!!!! faceplate would destroy the front! ;)

[Suffocation]

very nice jort

[Ssilencer]

much better witout that awfull nuts at the side of the hole.

[freecableguy]

very impressive work. just how much would shipping to the US be? humor me.

[Jort]

they won't be there next time.

now be honest SSilencer, the faceplate will ruin the looks of this unit.
maybe not with other unit's but this one is just too nice:)

very impressive work. just how much would shipping to the US be? humor me.

these unit's won't work in the US;)
230v/50hz;)

[Titinho]

those units look great cant whait to the $$$ and but a conore under it evap:cool: :banana:

[Ssilencer]

I don't like the way you guys do the hole for the display, there is no need to see anything outside the viewable area, I prefer thhis way:

http://img54.imageshack.us/img54/8512/mctszw30gg3wh.jpg

Note that you can't see the borders of the lcd display.

[LittleDevil]

Next batch of cases will be little better, but i think they are already great now... :cool:

I like all of them special this one...

http://ld-phasechange.com/images/production_line/12.jpg

tnx

P.S: Ssilencer i will need next batch of frosters...

:p:

[freecableguy]

they won't be there next time.

now be honest SSilencer, the faceplate will ruin the looks of this unit.
maybe not with other unit's but this one is just too nice:)



these unit's won't work in the US;)
230v/50hz;)

yeah but him installing a 120v compressor is easy. (now, him testing it....hmmm)

[Ssilencer]

Yes, they look excllent, but I think if you cut the hole for the display using the inside measures will look better.
About the frosters, no problem, contact me by msn and I will talk with johann.
You owe me a pic of the case with a blue froster :)

[LittleDevil]

Yes, they look excllent, but I think if you cut the hole for the display using the inside measures will look better.

You will see next batch soon and i will post pictures...:)

tnx

[Jort]

Brother is ready ;)

http://www.belgium-coolingsolutions.be/Pics/phase-change//custum_phase-change/DSC09168.JPG

testing later today :)

i'll make own topic tomorrow, great cases ales!

[BlueAqua]

Very nice units. I love the picture with all 5 in a row, looks very professional.

[wdrzal]

gclg2000 will like that one,its nipples are hard.:D

[luf1c3r]

Very pleasant, yes indeed. I like their units a lot. A very clean work.

[Ssilencer]

gclg2000 will like that one,its nipples are hard.:D

Report the last pic, it is pornographic!!!
:D

[jinu117]

Pornographic? where?
(Bringing mod stick)
Looking good btw. What are the "nipples" for?

[dinges]

Pornographic? where?
(Bringing mod stick)
Looking good btw. What are the "nipples" for?

fan control, pc startup temp, etc.

@jort im at 3.1ghz @ 1.5v atm, temps level out at about -14c (loaded). think contact could be a bit better though as the evap temp never goes below -32c

[Ssilencer]

fan control, pc startup temp, etc.

@jort im at 3.1ghz @ 1.5v atm, temps level out at about -14c (loaded). think contact could be a bit better though as the evap temp never goes below -32c

If evap is -32c and reported proc -14c, you are in ballpark.

[LittleDevil]

Jort make your thread... :stick:

tnx

[LittleDevil]

And @dinges send him a PM or something...

tnx

[Nosfer@tu]

Jort make your thread... :stick:

tnx
I thougth you where fredins or somthing since he posted in your thread.

Accualy not very nice to start posting pictures of your own creations trying to harvest the vesitors of little devils thread!

[dinges]

i thought this thread was about LD's cases, my unit has a case from LD (among with some other stuff), so i thought that would fit inhere.
its not my intention to offend anyone, so i'm sorry if i did :nono: :slapass:

[mikael999]

LD:

very nice units you got there.. Before i saw your units i realy havent been interested in Phase units, but since i have seen your units i am sold. in some way i just MUSt get a Phase unit made by you :P

A shame that i dont have the money for one right now, but maybe it comes.

keep it on ;)

[Nosfer@tu]

LD:

very nice units you got there.. Before i saw your units i realy havent been interested in Phase units, but since i have seen your units i am sold. in some way i just MUSt get a Phase unit made by you :P

A shame that i dont have the money for one right now, but maybe it comes.

keep it on ;)

Sure it will mate ;)

Mikael999 is also from hardware-test´s fora :)

[Jort]

I thougth you where fredins or somthing since he posted in your thread.

Accualy not very nice to start posting pictures of your own creations trying to harvest the vesitors of little devils thread!

i don't want to harvest any visitors at all. damn what happend to this place?
xtreme sales market or what:(

[Nordling]

LittleDevil
What you use fan? Characteristics and firm tell please =)

[Nosfer@tu]

i don't want to harvest any visitors at all. damn what happend to this place?
xtreme sales market or what:(

Sry Jort, Im new, So I need a bit more XS education.

[Jort]

back in the days everyone was happy that we showed pics to our friends and fellow members.

because i used the cases of littledevil i tought i would be nice to show it here and let the people see what nice case's he has.

thats all:)

[LittleDevil]

Here are some nice pics of brazed and cleaned evaps...

http://ld-phasechange.com/images/evaps/cascade/1.jpg

http://ld-phasechange.com/images/%5edon.k's%5e's%20SS/4.jpg

http://ld-phasechange.com/images/evaps/Picture%20022.jpg

And unit with MP14FB compressor...

http://ld-phasechange.com/images/black_MP14FB/1.jpg

http://ld-phasechange.com/images/black_MP14FB/2.jpg

tnx

[Ssilencer]

Excellent job, super clean.

[lross78550]

Looks nice i cant believe a guy living in Slovenia Ohio could turn out this quality of work :)
Lee

inside joke you had to have read a previous post.

[Nosfer@tu]

Looks nice i cant believe a guy living in Slovenia Ohio could turn out this quality of work :)
Lee

inside joke you had to have read a previous post.

Ahhh. Was just about to :slapass: you but then I read Inside joke .....

yes he REALLY does Quality work :D

[LittleDevil]

And another one :p:

http://ld-phasechange.com/images/%5edon.k's%5e's%20SS/1.jpg

http://ld-phasechange.com/images/%5edon.k's%5e's%20SS/7.jpg

http://ld-phasechange.com/images/%5edon.k's%5e's%20SS/8.jpg

[Unknown_road]

http://phasechange.extremecooling.net/littledevil/evaps/Picture%20022.jpg

is this system with a NL11F and r507as well? I hope you have a very very powerfull fan (150cfm+) on it or else I think the compressor will have a short lifetime. that condensor has less capacity then a stock prom condensor so discharge pressures will rise above 15bar very often.

[Golden_Eagle]

well, definitely the units looks great, either from outside or inside the cases!!

[ludeboy12]

damn these units looks soooo good. Stop tempting me to go back to phase....

[serj666]

Good job LittleDevil :rehab:

[LittleDevil]

tnx guys :toast: :toast:

[LittleDevil]

is this system with a NL11F and r507as well? I hope you have a very very powerfull fan (150cfm+) on it or else I think the compressor will have a short lifetime. that condensor has less capacity then a stock prom condensor so discharge pressures will rise above 15bar very often.

I'm using desuperheater too and high side pressure is about 13,5bar...

tnx

[LittleDevil]

This unit is for PC70 lian li case (little bigger botom)... ;)

http://ld-phasechange.com/images/Metalion'SS/3.jpg

tnx

[Nanometer]

Very nice. They are clean cut, look great and they do perform! Too bad I'm not more into phase.

[toddm27]

very clean, nice

[Thrilla]

You little devil, lol, man that's clean :eek:

[^don.k's^]

And another one :p:

http://phasechange.extremecooling.net/littledevil/%5edon.k's%5e's%20SS/1.jpg

http://phasechange.extremecooling.net/littledevil/%5edon.k's%5e's%20SS/7.jpg

http://phasechange.extremecooling.net/littledevil/%5edon.k's%5e's%20SS/8.jpg


That's mine!:p: You know i like it very much LD, i cant wait for it:D

[Arpus]

Pretty SS Donk.s:) :)
For christmas y want one of this amazing SS.
Regrats.

[MasterOfTheReal]

Next batch of cases will be little better, but i think they are already great now... :cool:

I like all of them special this one...

http://phasechange.extremecooling.net/littledevil/production_line/12.jpg

tnx

P.S: Ssilencer i will need next batch of frosters...

:p:
I found my new desktop backgroud!

[LittleDevil]

Here is one finished unit with MP14FB compressor 1/2HP

http://ld-phasechange.com/images/black_MP14FB/3.jpg

http://ld-phasechange.com/images/black_MP14FB/4.jpg

http://ld-phasechange.com/images/black_MP14FB/5.jpg

tnx

[johnsally]

your work is awesome, so clean.... keep up the good work

[Nosfer@tu]

how much are you load testng with in post 163???

[LittleDevil]

Units are ready...

http://ld-phasechange.com/images/sale/4.jpg

http://ld-phasechange.com/images/sale/5.jpg

http://ld-phasechange.com/images/sale/6.jpg

And MP14FB is ready too...

http://ld-phasechange.com/images/black_MP14FB/7.jpg

http://ld-phasechange.com/images/black_MP14FB/6.jpg

Nosfer@tu: little more than 160W, neet to tune it, because this is bench unit...

[Nosfer@tu]

Units are ready...

Nosfer@tu: little more than 160W, neet to tune it, because this is bench unit...

Nice dude :)

[DaCoSa]

LittleDevil: I have sent you an email

regards

[Jort]

wait another week till he's back from vacation ;)

[DaCoSa]

wait another week till he's back from vacation ;)
No problem! I´am wait :woot:
regards

[Lehmann]

Amazing work LittleDevil !!!

Truly inspirational.

[LittleDevil]

Black cases arrived :)

http://ld-phasechange.com/images/SS_cases/1.jpg

http://ld-phasechange.com/images/SS_cases/2.jpg

http://ld-phasechange.com/images/SS_cases/3.jpg

http://ld-phasechange.com/images/SS_cases/4.jpg

thanks

[syne_24]

Nice work man very professional looking. And attention to detail. :D

[LittleDevil]

Thanks man :)

[Moc]

I got a case+condensor from you (Paul Vog..... remember?) an it is GREAT! I really love it...

[Mankz_91]

Love the new Black cases.....

Moc, lets see some picceys!!!!!! and some temps !!!!!!!!!!!!!

[Raiden Zero]

Love the new Black cases.....

Moc, lets see some picceys!!!!!! and some temps !!!!!!!!!!!!!

I think he's busy with finishing the unit (nl11f (from my old mach1), gfroster value, Jan/Joe_Cool evap., LittleDevil case+condenser)...dunno if he got the time to make pics and post them.

raiden

[LittleDevil]

Love the new Black cases.....

I got a case+condensor from you (Paul Vog..... remember?) an it is GREAT! I really love it...

Thanks all :toast: ,Moc what colour of case do you have...?

[Raiden Zero]

Thanks all :toast: ,Moc what colour of case do you have...?

He got the stainless i bought from you :)

raiden

[LittleDevil]

Ohh i completely forgot :stick: great, i would like to see some pics of finished unit. :)

tnx

[osckhar]

@LittleDevil,
Keep up the good work. They look awesome!!!

pd. I want one. :)

Thanks,
Oscar

[LittleDevil]

Pics are finally working...

thanks

[LittleDevil]

Here are some new pics.

http://ld-phasechange.com/images/production_line/14.jpg

And some new tools ;)

http://ld-phasechange.com/images/refco/tools/6.jpg

thanks

[tim-]

that's an exact vacuum meter if it's microns showed on the screen :)

[LittleDevil]

No, that is weight of the gas, and there is a lot more functions on that thing ;)

That is vacuum meter during vacuum-ing...

http://ld-phasechange.com/images/refco/tools/7.jpg

thanks

[Moc]

No, its a weighing machine (don't know the exact word...) for refrigerant.
Edit: Too slow :( ....

[the_new_guy]

sweet toys you got their!!!!!!!!!

[kayl]

nice tools littledevil, thats got to help with making bulk units.
im quiet interested in what charge we are putting into these units, i bet its not much. ALso interesting if one unit needs much more gas compared to the next.

[Noob-ftw]

Nice job!

[Pete]

Sexy as ever Ales....as ever!

[barzi]

How much did you buy one?
I want a prom/vapochill too but i don't wanna spend 600+ euro

[johann]

nice tools littledevil, thats got to help with making bulk units.
im quiet interested in what charge we are putting into these units, i bet its not much. ALso interesting if one unit needs much more gas compared to the next.

I find identical units often have very different charges. I dont think we will ever be able to simply give it a static charge and be done.

1-2 grams can make a massive difference at times.

[Nosfer@tu]

How much did you buy one?
I want a prom/vapochill too but i don't wanna spend 600+ euro

You will never geet prices on the fora it self. PM is the way to find out.

600 Euro you can get a okay unit to my understanding.

[LittleDevil]

Lastest unit for my friend here in Slovenia.

http://ld-phasechange.com/images/GrinTomato's_SS/2.jpg


thanks

[LittleDevil]

Little Update.

http://ld-phasechange.com/images/GrinTomato's_SS/6.jpg

http://ld-phasechange.com/images/GrinTomato's_SS/7.jpg

regards

[mykeos]

take all the time you need,LD!this baby will be born to FLY!;)

[Athens[2004]]

I like your work mate cause you always give attention on detail's <----> thats the difference :toast:

[LittleDevil]

Athens[2004] thanks

Unit is running, i'm using 0.028 captube here, we will see loaded temps later.

http://ld-phasechange.com/images/GrinTomato's_SS/8.jpg

Gas height in the unit.

http://ld-phasechange.com/images/GrinTomato's_SS/9.jpg

regards

[Jack]

The suctionline looks a bit long, compared to the placement of the cpu socket.

[LittleDevil]

Mobo isn't mounted yet, it will be little higher, about 2 cm, i think suction line vill be pefrect.

regards

[LittleDevil]

Tonight playing with that baby :p:

http://ld-phasechange.com/images/GrinTomato's_SS/10.jpg

regards

[Ssilencer]

Clean work as always, I just prefer to make the phase cases at the same size as the computer case.

[4Qman]

Superb match, Clean and pro stlee all the way. Hows things going regards Load temps LD.

[LittleDevil]

Superb match, Clean and pro stlee all the way. Hows things going regards Load temps LD.

thanks, he will use voltcraft K101 digital thermometer.

Regards

[Patriote]

Omg These Units looks so clean! I'd Buy one for sure! If only i had the money... How much would thoses cost ?

[LittleDevil]

Omg These Units looks so clean! I'd Buy one for sure! If only i had the money... How much would thoses cost ?

Send me pa PM if you want to know price for unit.

regards

[kayl]

Little Update.

http://ld-phasechange.com/images/GrinTomato's_SS/7.jpg

regards

what mobo is that one, how come the NB cooler is missing :confused:
i noticed in the finished pics the theres a stock heatsink on the NB, is that the same mobo or your mobo for testing?
98g of charge hey, little more than the commercial units which is what I would expect, jin said he puts similar amounts of refrigerant into his units.
be interesting if for your next build if ya charge with that same amount unit gets good temps and holds load. :toast:

[johann]

what mobo is that one, how come the NB cooler is missing :confused:
i noticed in the finished pics the theres a stock heatsink on the NB, is that the same mobo or your mobo for testing?
98g of charge hey, little more than the commercial units which is what I would expect, jin said he puts similar amounts of refrigerant into his units.
be interesting if for your next build if ya charge with that same amount unit gets good temps and holds load. :toast:

Kayl I dont think we will ever be able to charge on weigth. I have had systems very similar with very different charges. Unless you can get the units absolutely identical I dont think it could be done and still have every unit running as good as it can.

Even 1gram up or down can make a massive difference in my experience.

[LittleDevil]

Kayl I dont think we will ever be able to charge on weigth. I have had systems very similar with very different charges. Unless you can get the units absolutely identical I dont think it could be done and still have every unit running as good as it can.

Even 1gram up or down can make a massive difference in my experience.

Yes agree with that, in that unit is about 115g for 402 and it works very well.

That mobo is Asus P5WDH Deluxe 975 chipset.

regards

[LittleDevil]

Here is another one, Metalic Black Single Stage:

http://ld-phasechange.com/images/MetalicBlack_SS/1.jpg

http://ld-phasechange.com/images/MetalicBlack_SS/2.jpg

http://ld-phasechange.com/images/MetalicBlack_SS/3.jpg

http://ld-phasechange.com/images/MetalicBlack_SS/4.jpg

regards

[LittleDevil]

Unit for my fried is finished, here are some pics abd results...


http://ld-phasechange.com/images/GrinTomato's_SS/14.jpg

http://ld-phasechange.com/images/GrinTomato's_SS/15.jpg


X6800 @ 4712Mhz @ 1,81V, motherboard fully moded

http://ld-phasechange.com/images/GrinTomato's_SS/16.JPG

http://ld-phasechange.com/images/GrinTomato's_SS/13.jpg

http://ld-phasechange.com/images/vmod/p5b_deluxe/2.jpg

thanks

[kayl]

did you do the vmods LD?
all done but vdrop, the vcore one is quiet hard to do i removed mine didnt trust it :mad:
what are temps like with a 32m run SPI?

[LittleDevil]

did you do the vmods LD?

Yes, i make all those vmods, why?


@spi 16MB X6800 @ 4562Mhz @ 1,81V

http://ld-phasechange.com/images/GrinTomato's_SS/17.jpg


thanks

[Nosfer@tu]

Yes, i make all those vmods, why?
thanks

He is asking because he thinks the Vcore was a hard mod :rolleyes: ;)

[kayl]

He is asking because he thinks the Vcore was a hard mod :rolleyes: ;)


spot on:toast:
LD ya need either the 32m run and also dual 32m run to make sure ;)
small runs dont load system much at all.
for the vmods the vmem and nb are easier as have IC to solder to.
but vcore and vdroop tinny resistor and capacitor mods i find harder.
i need thinner wire and that mag lamp to do mine ;)
hard to see the small stuff, and get a good join so not to break off later.

[LittleDevil]

Metalic Black Single Stage and temps on new load tester.

http://ld-phasechange.com/images/MetalicBlack_SS/5.jpg

regards

[Ssilencer]

Metalic Black Single Stage and temps on new load tester.

http://ld-phasechange.com/images/MetalicBlack_SS/5.jpg

regards

Edited, Post after dinner with alcohol is not good :p

[jinu117]

Uhmmm I thought I saw "W" on his kill-a-watt of European version? (I think that one looks cooler than Kill a watt though... damn.)

[Ssilencer]

Uhmmm I thought I saw "W" on his kill-a-watt of European version? (I think that one looks cooler than Kill a watt though... damn.)

Edited, yes, it is watts, not volts :p

[kayl]

Edited, Post after dinner with alcohol is not good :p


heeheh, i got to read it before ya changed;)
dinner with alcohol must have been a red wine, and not the clear stuff.
215w not bad LD, few members have these loaders now with thermal cutout.
wish i had one:(

[LittleDevil]

Forgot to tell i had -22,5°c on copper block (load tester) at 215W...

regards

[kayl]

nice, can we see some more pics of the dummy load.

[LittleDevil]

Picture of load tester... ;)

http://ld-phasechange.com/images/load_tester/1.jpg

regards

[jinu117]

Bit off topic. But I do have design ready to be CNC machined with easy insulation and assembly for consistent result... :)
I have so many projects for this poor cnc machine it's not even funny... :P

[kayl]

that looks nice :toast:
where did you attach the thermal cutout?

[jamex]

So littledevil, I'm very insterested in your units. I'm definetly not a n00b but I've never done the step towards phase change, my only concern is always condensation, I thought about one of those aseteks or others, but I don't like their method of avoiding condensation.

I think you are using other methods tho avoid it, what are they? please let me know, maybe I will change my mind and buy one of yours.

Thanks man!!!! :stick:

:toast:

[Pipi]

Neoprene or armaflex is usually used in LD's systems. I have seen him using liquid electrical tape and he says it rocks.

[giraffen]

Picture of load tester... ;)

http://ld-phasechange.com/images/load_tester/1.jpg

regards


Nice work :clap: What kind of sensor is it?

/Jesper

[Jort]

its a cardridge heatload :)

[LittleDevil]

Today i got bottoms for V2000 Phase Change Kit.

http://ld-phasechange.com/images/V2000_kit/1.jpg

http://ld-phasechange.com/images/V2000_kit/2.jpg

regards

[LittleDevil]

Here are new three ''sisters'' :p:

http://ld-phasechange.com/images/OcTeamFinland/Rotary/2.jpg

Regards

[tim-]

cute. what model of compressor?

you may have one left for sale? please pm me.

[Brettbeck]

Are those powerfull single-stages LittleDevil?

[LittleDevil]

cute. what model of compressor?

you may have one left for sale? please pm me.

Done ;)

Are those powerfull single-stages LittleDevil?

Yes ;)

Regards

[Brettbeck]

Yes ;)



How powerful ;) ?

[LittleDevil]

How powerful ;) ?

1HP, you will see results very soon.

Regards

[Brettbeck]

1HP, you will see results very soon.

Regards

Cool! Look forward to seeing some results :D!

[cold_ice]

What gas will you use?

[Moc]

The compressor is a GK151P for R410A so i think he will use R410A.

[LittleDevil]

What gas will you use?

Probably r402a, but i will try both r402a and r410a to see the difference.

regards

[LittleDevil]

Here you can see how V2000 kit fits under Lian-LI V2000 :)

http://ld-phasechange.com/images/tjelaw's_V2000b/7.jpg

Pics of rotary units tomorrow.

regards

[Brettbeck]

Nice. That condenser looks tiny!!

[quintus]

verry nice LD!!!

make me a small favor pls! is there any site with the pdf for the electrolux compressors? i try to find the height of the mp14fb but no way! imposible!

thx

[LittleDevil]

make me a small favor pls! is there any site with the pdf for the electrolux compressors? i try to find the height of the mp14fb bot no way! imposible!

I will measure it tomorrow and tell you how high is it, but i can tell you around 22cm ;)

regards

[tjelaw]

lookin good LD ;)

[Barnsley-Bill]

love the look of the unit with the Lian-LI V2000 well done mate :)

[LittleDevil]

Thanks Barnsley-Bill

@quintus: MP14FB is exactly 22cm high with legs ;)

regards

[LittleDevil]

Some more pics, V2000 kits, standard units, units with golden froster...etc

http://ld-phasechange.com/images/production_line/17.jpg

http://ld-phasechange.com/images/production_line/15.jpg

http://ld-phasechange.com/images/production_line/16.jpg

http://ld-phasechange.com/images/production_line/18.jpg

regards

[Hystrix^]

Very nice work littledevil

Regards

[Mankz_91]

Hey LD...

apparently your making a nice little silver unit for a guy here at school with me... named Chris Butcher...

got any pics or temps for it ?? (might have to borrow it when he gets it..)

[LittleDevil]

Hey LD...

apparently your making a nice little silver unit for a guy here at school with me... named Chris Butcher...

got any pics or temps for it ?? (might have to borrow it when he gets it..)

Hey, frosty pics tomorrow and load test :p:

Best Regards