LittleDevil SS Worklog

[quintus]

Thanks Barnsley-Bill

@quintus: MP14FB is exactly 22cm high with legs ;)

regards

damn a bit too tall but hell...
Thank you!
regards,
q

[LittleDevil]

Today got new holddowns. Thanks Duniek ;)

http://ld-phasechange.com/images/evaps/mounting/rev2.0/1.jpg

http://ld-phasechange.com/images/evaps/mounting/rev2.0/2.jpg

regards

[Nordling]

http://gif.vio.ru/03/expect.gif http://gif.vio.ru/03/hi.gif Come to me in ICQ tomorrow in the afternoon, we shall discuss old questions

[LittleDevil]

Here is first Rotary Single Stage...

http://ld-phasechange.com/images/OcTeamFinland/Rotary/5.jpg

http://ld-phasechange.com/images/OcTeamFinland/Rotary/4.jpg

System is tunned for really high loads 252W @ -46°c room temp 20°c

http://ld-phasechange.com/images/OcTeamFinland/Rotary/6.jpg

Best Regards

[Nosfer@tu]

OWNAGE LD :D

Very evil performance :p
I like the hold down with the soft eges and the gentel curves :D

BTW how it you bench tables comming along? Can you PM me a price? :D

[LittleDevil]

I like the hold down with the soft eges and the gentel curves

Me too ::p:

BTW how it you bench tables comming along? Can you PM me a price?

I will when it will be done.

Regards

[Boble76]

Very nice LD!! Can't wait... :slobber: :toast:

[Harshal]

Damn... you just keep doing good stuff!! GoodLuck for Future!
Cant wait to see wat you got next :)

[Boble76]

I can't get no sleep before I get the "one" fot me! :slobber: :hehe:
That's huge! I thought it's little smaller. :ROTF:

[Nordling]

Boble76
+1

LittleDevil - Knock when you will be released:
ICQ Number: 293-344-943
Name: Kirill Krasnov
Nickname: Nordling

[Dani]

Very powerful rotarys, well done :D :fact: :hehe:
Remember those OCTeamFinland stickers (http://ld-phasechange.com/images/OcTeamFinland/Single_Stage/1.jpg) on all of those sweet heavy-duty rotarys ;)

[Boble76]

EDIT: Dani's typo. LOL

Yes, those OCTeamFinland stickers.

[Dani]

There will be OCTeamFinland stickers, like this:

http://ld-phasechange.com/images/OcTeamFinland/Single_Stage/4.jpg

[Moc]

Nice!

[Drag]

Your own brand, thats hawt

[Kant]

Really nice work, as usual !!

[Misko]

Here is first Rotary Single Stage...



LittleDevil how strong are rotary in side it? 12.000BTU? Which gas did u use? Maybe some pics in side :toast:

[LittleDevil]

Yes i will get stickers this week and i will put them on those sexy units :D

Here is another one :p:

http://ld-phasechange.com/images/OcTeamFinland/Rotary/7.jpg

http://ld-phasechange.com/images/OcTeamFinland/Rotary/8.jpg

http://ld-phasechange.com/images/OcTeamFinland/Rotary/9.jpg

http://ld-phasechange.com/images/OcTeamFinland/Rotary/11.jpg

And picture without flash :D

http://ld-phasechange.com/images/OcTeamFinland/Rotary/10.jpg

@Misko82: It is about 12.000BTU.

Best regards

[Dani]

:slobber: :slobber: :slobber:
Very nice LD, those babys are soon ready to transport to Finland :cool:

[Boble76]

I'm ready too to take that transport right here. :slobber: :D
They are so cute. :p:

[Mankz_91]

Any news on those temps and frosty pics LD ??

[LittleDevil]

Hey Mankz_91 here are frosty pics:

http://ld-phasechange.com/images/ChrisButchers'_SS/12.jpg

http://ld-phasechange.com/images/ChrisButchers'_SS/13.jpg

http://ld-phasechange.com/images/ChrisButchers'_SS/16.jpg

http://ld-phasechange.com/images/ChrisButchers'_SS/17.jpg

Best Regards

[Drag]

will these outperform mach2gt?

[Nosfer@tu]

will these outperform mach2gt?

Outperforme is not the word ;)

It will leve the GT behinde with 10-20 Degrees, Load idle I would say :)

[Duniek]

do you use 402 or 410 in rotary SS?

[LittleDevil]

do you use 402 or 410 in rotary SS?

R507 ;)

regards

[Mankz_91]

wow very nice LD..!!

I'll wait to see his in the flesh, then might give you a shout...

[LittleDevil]

Some new units ready for shipping...

http://ld-phasechange.com/images/production_line/20.jpg

http://ld-phasechange.com/images/production_line/19.jpg

Regards

[before]

Very clean job buddy! :)

[Boble76]

What's the situation of OCTF Rotarys? Ready for shipping soon? :slobber:

[LittleDevil]

What's the situation of OCTF Rotarys? Ready for shipping soon? :slobber:

Yep, shippin really soon, here is one picture to see how big are those units :p:

http://shrani.si/files/picture005szlx.jpg

On the picture looks like bigger than in real :toast:

Best Regards

[LittleDevil]

Another Single Stage is ready.

http://ld-phasechange.com/images/Titinhos_v2000b/ss/2.jpg

http://ld-phasechange.com/images/Titinhos_v2000b/ss/1.jpg

regards

[Brettbeck]

Very nice as allways. Are those controllers your own?

[Ssilencer]

Very nice as allways. Are those controllers your own?

Looks like one of our XE 2.0 K type controllers.

http://ld-phasechange.com/images/Pederrs's_SS/5.jpg (http://www.xtremesystems.org/forums/showthread.php?t=49823)

[Brettbeck]

Looks like one of our XE 2.0 K type controllers.


Ahh yeah I can just make out the top line of the display. I only asked because I remember LittleDevil showing some of his own controllers before.

[Dani]

Yep, shippin really soon, here is one picture to see how big are those units :p:


Best Regards

How soon :confused:

[LittleDevil]

I send you email Dani. :)

I will post new pics today (stickers on units....) :rolleyes:

regards

[LittleDevil]

Dani, here are some pictures for you ;)

http://ld-phasechange.com/images/OcTeamFinland/Rotary/12.jpg

http://ld-phasechange.com/images/OcTeamFinland/Rotary/13.jpg

regards

[Pete]

Ales you really a Little Devil....

Anyone seen the film ''The Machinest'' Dude does not ever sleep..i swear Ales is exactly that. Your a phase change unit baby producing machine!!!

Nice dude

[4Qman]

Ales you really a Little Devil....

Anyone seen the film ''The Machinest'' Dude does not ever sleep..i swear Ales is exactly that. Your a phase change unit baby producing machine!!!

Nice dude

Agreed,

Little Devil whats the base mesurments of the cascade Cases as id like a idea of the amount of room id have to play with for my build im planning.

[Jort]

Wow ales :eek:

I remember your first phase change and now look how far you've come:clap: :clap:

Regards:toast:

[kayl]

nice work there LD,
is there any chance of some pics of the rotary units with out the cases next time ya building them. The Findland team must be doing very well on HWBOT with all these phase change coolers :toast:

[LittleDevil]

@kayl: There is nothing special on those units ;)

Here is mooded vapo XE ;)

http://shrani.si/files/picture043tsom.jpg

regards

[Big SturL]

What did you charge the XE with?

[Brettbeck]

You must have done a fair bit of cleaning on the braze joints :p: ... I can't see any oxidation whatsoever ;) .

[kayl]

@kayl: There is nothing special on those units ;)

Here is mooded vapo XE ;)

regards

k thanxs, i didnt expect no special tricks, just curious what insides look like, condenser used etc. from the looks of the case, have ya though of doing dual compressors unit inside and maybe a cpu unit, then on second compressor unit a dual head SLI, im sure one of the findland team members would be interested in such a beast.
still interested in pic when ya get the chance ;)

[LittleDevil]

@Big SturL: New condensor and new issulation...

Is it yust enough place to put 2x NL11F inside, but i think it's not enough space for dual stage cascade.

http://ld-phasechange.com/images/OcTeamFinland/Rotary/2.jpg

http://ld-phasechange.com/images/SS_cases/rotary/6.jpg

http://ld-phasechange.com/images/SS_cases/rotary/1.jpg

http://ld-phasechange.com/images/SS_cases/rotary/5.jpg

Regards

[Big SturL]

Hehe, I was wondering what gas you used in the XE, not what you changed :P

[LittleDevil]

R404a.

Regards

[Big SturL]

Oh, so the BD50 can handle such a "high-pressure" gas as that?

[t800]

@Big SturL: New condensor and new issulation...

Is it yust enough place to put 2x NL11F inside, but i think it's not enough space for dual stage cascade.

http://ld-phasechange.com/images/SS_cases/rotary/6.jpg

What are that case dimensions?



Originally Posted by cold_ice
What gas will you use?

Probably r402a, but i will try both r402a and r410a to see the difference.

regards



Originally Posted by Duniek
do you use 402 or 410 in rotary SS?

R507

regards

Hmm, why switch to R507? didn't R402/R410 worked?

[n00b 0f l337]

I bet you could do it with a coaxial heat exchanger above the condenser, plate HX vertical orientation would make it hard.

[kayl]

i like the condenser your using there LD, so these rotaries are they 1hp or tad bigger, what mains frequency they run at?
Ya got pm

[Jort]

Search the Vapochill fora for modifications, they say it's compatible with R404a but startup problems CAN occur.

I modded a VapoXE once and it works flawless with R507 ;)

[Duronbird]

http://plaza.fi/muropaketti/bbs/t475955,120#m1700826144

[Boble76]

OMG!!!! (http://img155.imageshack.us/my.php?image=rotsku005customfi7.jpg) :shocked:

Nice job from GLS transpoint.:mad:

Too bad for Bowtie :(
Duronbird, let's hope yours and mine is ok.

[Pete]

That sucks guys. I seen Luke XE say how bad GLS are. Hope LD can remake and clame on the insurance

[LittleDevil]

Guys i almost cannot belive what i see on those pics :eek: Guys please send me PM with info of all units, i'm already in contact with GLS.

Best Regards

[Duh]

what a shame.. masterpiece ruined by some stupids :@

[Boble76]

Little things goit to do with my SS too...:confused:
Here's some pictures.

boble76's Rotary SS (http://koti.mbnet.fi/boble76/Tietokone../LD_SS/)

What do you think about..? :D Just a little repair.

[Baron]

Little things goit to do with my SS too...:confused:
Here's some pictures.

boble76's Rotary SS (http://koti.mbnet.fi/boble76/Tietokone../LD_SS/)

What do you think about..? :D Just a little repair.

Where they playig football with the box or something?

[osckhar]

Impressive! Not words...

ps. I received my SS from LittleDevil in excellent condition.

Oscar

[LittleDevil]

Guys, please contact me on PM!

regards

[Brettbeck]

Damn some of those guys who work at GLS are real bastards. It looked like those units have been thrown around like a bloody tennis ball :mad: .

Were the packages marked with fragile etc? Maybe more people should start using pallets like cold_ice does. That way there is never really going to be any damage, unless it falls off the stacklift truck(s).

[Moc]

Holy :banana::banana::banana::banana:... how did they broke off the fan?

[LittleDevil]

Brettbeck: I packed them really good, i ordered special boxex for those units...

Moc: Dunno...

regards

[Moc]

Did you filled the inside of the cases with something?

[Pete]

LD packs dude...just look at some of his posts of unit he has sent out and users that have them delivered. GLS seams a really :banana::banana::banana::banana:e company to use but sadly about the only one that will take the job on. Insurance aint it great

[Boble76]

Did you filled the inside of the cases with something?

Yes, the package was well done, I think...

pic 1 (http://koti.mbnet.fi/boble76/Tietokone../LD_SS/ROTARY_SS_02.jpg) & pic 2 (http://koti.mbnet.fi/boble76/Tietokone../LD_SS/ROTARY_SS_06.jpg)

[Moc]

Yes, thats really good packed!
But I wanted to know if LD put sth. IN the Phase-Change Case?

[LittleDevil]

Some new pics, thanks Dimas for condensors ;)

Load test on all units today :p:

http://ld-phasechange.com/images/Oliver's_SS/4.jpg

http://ld-phasechange.com/images/Oliver's_SS/6.jpg

http://ld-phasechange.com/images/Oliver's_SS/7.jpg

And some V2000kits:

http://ld-phasechange.com/images/GILLOU'S_V2000kit/6.jpg

http://ld-phasechange.com/images/GILLOU'S_V2000kit/7.jpg

http://ld-phasechange.com/images/GILLOU'S_V2000kit/9.jpg

http://ld-phasechange.com/images/tjelaw's_V2000b/11.jpg

http://ld-phasechange.com/images/tjelaw's_V2000b/10.jpg

http://ld-phasechange.com/images/tjelaw's_V2000b/9.jpg

Best regards

[tiborrr]

Hmm, seems like the bolts that keep the rotary compressor helt to it's base cracked or have been loosely tightened. Otherwise the outside of the package looks nice. If the problem was with the GLS shipping, the damage to the packaging would be visible, right?

LD, inspect those bolts & housing ASAP! It seems like loose compressor is making the pasta out of interior... :( From an engineering stance I can tell you that there is something very wrong in the design of this case. The weight distribution with rotary compressors isn't the same as they're higher thus making bigger momentum on the structure of the chassis, especially on the bolts. You really need to redefine something in this chassis.

Just my 2 cents.

[Brettbeck]

Awesome job as allways LD. Do you paint the brazed joints so you don't have to clean them to make them shine :p:?

[LittleDevil]

@tiborrr: Thank you for your advice, but problem isn't in case or bolts but i got too small washers... And we will solve that problem too so there is no problem....

@Brettbeck: Only for better looking, i always clean brazed joints...

Regards

[BlueAqua]

Great job on the finished product. You always do a great job making it look completely finished without shortcuts of any of the builders. Keep up the good work LD.

[Duniek]

http://ld-phasechange.com/images/Oliver's_SS/6.jpg

this condesor is beautyfull :slobber:
maybe I take one :)

[Oliver]

Some new pics, thanks Dimas for condensors ;)

Load test on all units today :p:

http://ld-phasechange.com/images/Oliver's_SS/4.jpg

http://ld-phasechange.com/images/Oliver's_SS/6.jpg

http://ld-phasechange.com/images/Oliver's_SS/7.jpg

And some V2000kits:

http://ld-phasechange.com/images/GILLOU'S_V2000kit/6.jpg

http://ld-phasechange.com/images/GILLOU'S_V2000kit/7.jpg

http://ld-phasechange.com/images/GILLOU'S_V2000kit/9.jpg

http://ld-phasechange.com/images/tjelaw's_V2000b/11.jpg

http://ld-phasechange.com/images/tjelaw's_V2000b/10.jpg

http://ld-phasechange.com/images/tjelaw's_V2000b/9.jpg

Best regards

Hello champ, the Units and the work you do looks so :eek: :banana:

I can not wait to see the load temps on my SS Unit :fact:

[LittleDevil]

Thanks Oliver ;)

regards

[Oliver]

Thanks Oliver ;)

regards

Your welcome :p:

I can not wait to receive the SS Unit :woot:

[LittleDevil]

Your welcome :p:

I can not wait to receive the SS Unit :woot:

Here are some new pics of your unit:

http://ld-phasechange.com/images/Oliver's_SS/10.jpg

http://ld-phasechange.com/images/Oliver's_SS/9.jpg

http://ld-phasechange.com/images/Oliver's_SS/12.jpg

Regards

[Brettbeck]

Nice job as allway. But isn't the filter/drier supposed to be placed at an angle to catch any dirt/moist?

[wdrzal]

no, just as long as you have enough refrigerant and sub-cooling so you have a liquid seal at beginning of cap tube. You must have a liquid seal for a cap tube to work.

[nhenhophach]

Seem like you will kill ASETEK, LD:toast:

[sacha35]

Very nice work there mate.

[Oliver]

Here are some new pics of your unit:

http://ld-phasechange.com/images/Oliver's_SS/10.jpg

http://ld-phasechange.com/images/Oliver's_SS/9.jpg

http://ld-phasechange.com/images/Oliver's_SS/12.jpg

Regards

Thanks for posting new pics champ , looks good as usual

have you tested it on your E6600 or tested it more @ 4 hours load temps ?

[Barnsley-Bill]

realy nice looking ss mate some of the cleanest ive seen :).

[LittleDevil]

Thanks guys for nice comments ;)

regards

[Oliver]

Champ your welcome ;)

What about the bench table how goes with it/or them, and the LN2 Containers ?

[LittleDevil]

Some more pics ;)

http://ld-phasechange.com/images/Oliver's_SS/14.jpg

http://ld-phasechange.com/images/Oliver's_SS/16.jpg

Best Regards

[SexyMF]

How do you make such clean evaporators?

[Nosfer@tu]

How do you make such clean evaporators?

he is a Perfectionist

http://en.wikipedia.org/wiki/Perfectionism

[Brettbeck]

How do you make such clean evaporators?


Practice and a LOT of cleaning :D!

[LittleDevil]

V2000 + kit + Unseen Controler :D

http://ld-phasechange.com/images/tjelaw's_V2000b/21.jpg

http://ld-phasechange.com/images/tjelaw's_V2000b/22.jpg

http://ld-phasechange.com/images/tjelaw's_V2000b/23.jpg

http://ld-phasechange.com/images/tjelaw's_V2000b/24.jpg

Best Regards

[DeDaL]

Awesome as always.

[teyber]

yikes, the fact that its STAINLESS is truley jaw dropping... must be a third of the price of the SS in that case!

[bl1zZ]

Little Devil, i love your clean work!

[LittleDevil]

Thanks for nice commenst guys :toast:

regards

[HoriWanderFuLL]

Nice tidy units mate :up:

why cant i ever stop looking at all these units...just amazing stuff the quality of the units of today .

Pitty my wife dosnt think so she cant even take the time when i wanna show her how fast my Q6600 goes :shrug:

[gosmeyer]

Very nice v2000 indeed :yepp: , any results from it yet?

[xt0m]

Hey Devil - just wondering; what are the dimensions of those SS's you're building for Nossy (Nosfer@tu) and me?
(Width, Height, Depth)

[Nosfer@tu]

Hey Devil - just wondering; what are the dimensions of those SS's you're building for Nossy (Nosfer@tu) and me?
(Width, Height, Depth)

52 cm Length x 22 Width x 23 Higth

[LittleDevil]

Little Stronger unit ;)

http://ld-phasechange.com/images/Carpe%5eDiem_SS/1.jpg


http://ld-phasechange.com/images/Carpe%5eDiem_SS/4.jpg

http://ld-phasechange.com/images/Carpe%5eDiem_SS/6.jpg

Best Regards

[Brettbeck]

I like the way you've swooped the suction pipe all round the compressor :p: . Why not just use a copper spun acumulator to prevent floodback :)?

[4Qman]

Your builds are cleanest and most professional i have ever seen dude.

Outstanding as usual. ;)

[LittleDevil]

V2000KIT with Unseen Controler tuned for 200W load:

http://ld-phasechange.com/images/V2000_kit/no.1/1.jpg

http://ld-phasechange.com/images/V2000_kit/no.1/2.jpg

http://ld-phasechange.com/images/V2000_kit/no.1/3.jpg

Best Regards

[Pete]

Amazing stuff LD, think you are one the neatest and fastest builders going on here!

[LittleDevil]

Thanks Pete :up:

Controler mounted in my case :)

http://ld-phasechange.com/images/Carpe%5eDiem_SS/7.jpg

Regards

[Pete]

I think i mighht pm/msn ya dude as i haven't looked at any of your units/logs in ages and forgoten how nice these really are!

[tim-]

just curious are you doing this for living or is it just for some extra cash?
I mean, you produce a lot of units those days. Nice work as always!

regards
Tim

[Jort]

just curious are you doing this for living or is it just for some extra cash?
I mean, you produce a lot of units those days. Nice work as always!

regards
Tim

he's just a student ;) but a student with a nice hobby :D
i think it's vacation ..

Hey Ales you can mount the displays a little bit different, so you wont see the mountingscrews anymore, just a little better for the looks ;)

Kick me on msn would you :)

[LittleDevil]

Forgot to show finished unit, here are two pics.

http://ld-phasechange.com/images/Carpe%5eDiem_SS/10.jpg

http://ld-phasechange.com/images/Carpe%5eDiem_SS/11.jpg

Regards

[`danny]

You do some awesome work, keep it up

[LittleDevil]

White unit: ;)

http://ld-phasechange.com/images/SingleStage/no.1/1.jpg

http://ld-phasechange.com/images/SingleStage/no.1/2.jpg

Regards

[tim-]

do you got any picture of the white case mounted together? is it glossy?
is it 12 or 220v fan? what load are you aiming for?
regards
Tim

[LittleDevil]

Those are 220V fans and case is shiny white. We will see temps tomorrow.

Best Regards

[Pete]

LD sorry to be an ass but whats the STD of your case?

What would be the biggest conderser and compresser you can fit in there?

No controler ftted on the front, got an idea for it!

[gosmeyer]

The white will look nice, a clean sterilized look. :up:

[X_Man]

Wow what a tidy workplace! Too bad you are not in the states.

[ineedaname]

Those are just beautiful *sniff*

btw how much do u charge 4 1 of those?

[blindfitter]

LD sorry to be an ass but whats the STD of your case?

What would be the biggest conderser and compresser you can fit in there?

No controler ftted on the front, got an idea for it!

Pete, the size of case 220 x 230 x 520mm, whd, I just measured mine for ya:)

[Pete]

Pete, the size of case 220 x 230 x 520mm, whd, I just measured mine for ya:)

Thank you dude for doing that!

[Circaflex]

so what cases line up perfectly or almost perfect with these units? Im so tempted to get one but Im OCD with these kind of things, i want it to look perfect!

[Pete]

I think LD can get a case made to fit what you need. I'd say Lian-LI nicely

[LittleDevil]

Black Metalic Single Stage without controler, only k-type thermal probe on evap: ;)

http://ld-phasechange.com/images/SingleStage/no.2/1.jpg

http://ld-phasechange.com/images/SingleStage/no.2/2.jpg

http://ld-phasechange.com/images/SingleStage/no.2/3.jpg

Regards

[Moc]

Very nice!

[LittleDevil]

Thanks Moc :)

Here is another one with MP14FB Compressor:

http://ld-phasechange.com/images/SingleStage/no.3/1.jpg

http://ld-phasechange.com/images/SingleStage/no.3/2.jpg

http://ld-phasechange.com/images/SingleStage/no.3/4.jpg

Regards

[Fhqwhgads6680]

LD thats a nice looking little compressor. what are the specs on it and what does one of those run you? never seen that brand before? your personal opinion vs. the obvious danfoss competition?


sorry for the questions and small hi-jack... nice units man! you level of work is something I aspire towards man!

[LittleDevil]

That compressor is 14ccm, it has little better temps than NL11F.

Regards

[Pete]

Very dark but not overly and nutural dude

[noobzed]

your work is one of the best here, very good.

[LittleDevil]

Thanks noobzed :)

Best Regards

[Boble76]

After this all, yesterday I made quick test.
my room (http://koti.mbnet.fi/boble76/Tietokone../LD_SS/3.jpg) :D

http://koti.mbnet.fi/boble76/Tietokone../ASUS_E6600/E6700/4478MHz_1M.jpg

1.53V @ 4300-4350MHz 32M stable.
1.65-1.66V @ 4450MHz 8M stable.
Thanks man! :)

[LittleDevil]

Not bad at all :up:

regards

[LittleDevil]

Some new pics:

http://ld-phasechange.com/images/SingleStage/no.4/1.jpg

http://ld-phasechange.com/images/SingleStage/no.4/2.jpg

http://ld-phasechange.com/images/SingleStage/no.4/4.jpg

Regards

[LittleDevil]

New backplates 2mm thick and no bending: :)

http://ld-phasechange.com/images/backplates/2.jpg

Regards

[Jack]

Nice :) What kind of material is that backplate made from?

[DagoDuck]

Same question here. :)

[LittleDevil]

They are made of steel, black colour is coming next week.

regards

[DagoDuck]

I do not know, what you think of it, but I would make the corners round. Otherwise good work. :)

[killermiller]

What difference would that make?

[DagoDuck]

That is my opinion.. It would makes an optical difference. As these here: http://img368.imageshack.us/img368/2965/order2kt8.jpg

[killermiller]

You don't look at the back of the motherboard...

or do you?:up:

[LittleDevil]

I really don't see any problem with those corners.

Regards

[LittleDevil]

MP14FB is finished :yepp:

http://ld-phasechange.com/images/SingleStage/no.3/8.jpg

http://ld-phasechange.com/images/SingleStage/no.3/9.jpg

Regards

[killermiller]

I like that thermometer. Where is that from?

[LittleDevil]

I like that thermometer. Where is that from?

It is Eliwell EM300.

And white colour, i really like it ;)

http://ld-phasechange.com/images/SingleStage/no.1/6.jpg

http://ld-phasechange.com/images/SingleStage/no.1/5.jpg

Regards

[Duronbird]

http://ld-phasechange.com/images/SingleStage/no.1/5.jpg

dual

[LittleDevil]

http://ld-phasechange.com/images/SingleStage/no.1/5.jpg

dual

What did you mean with dual?

regards

[DagoDuck]

Maybe he thinks that it is two times the same picture. :p:

[LittleDevil]

Load: 220W

http://ld-phasechange.com/images/SingleStage/no.1/7.jpg

REgards

[n00b 0f l337]

Very good!

[LittleDevil]

Also got black colour of backplates. :yepp:

http://ld-phasechange.com/images/backplates/5.jpg

regards

[tim-]

looks good, but honestly, why boughter make 2 colors? :)

[LittleDevil]

Diferent colours at one place :yepp:

http://shrani.si/f/3D/Ca/1QBbQ53P/picture201.jpg


Regards

[tim-]

thats nice man, especially the white one :up:

[LittleDevil]

Thanks my friend ;)

Regards

[LittleDevil]

SS with ''carbon'' case will be finished really soon. Waiting for some black screws and some other stuff.

http://ld-phasechange.com/images/SingleStage/no.5/1.jpg

http://ld-phasechange.com/images/SingleStage/no.5/2.jpg

http://ld-phasechange.com/images/SingleStage/no.5/4.jpg

Best Regards

[Moc]

Carbon case is really awesome!

[TopherTony]

Hey man thats neat. Is it sticky backed vinyl? Or actual carbon panels? How easy is it scratch or come off, compared to normal paint?

[tim-]

tophertony:
it's vinyl,

littledevil:
nice and clean as allways my friend :)

regards
Tim

[LittleDevil]

New unit with Aspera compressor:

http://ld-phasechange.com/images/snollocer's_SS/3.jpg

http://ld-phasechange.com/images/snollocer's_SS/5.jpg

Regards

[Creek Tha Gray]

New unit with Aspera compressor:

Regards

great work wonder what temps they get with the new compressor and also have or do you make that new unit with all hardware needed to just hit power on it and then it will start pc when temps are ready?
and at what coat do they run in the USA.

[LittleDevil]

Little update: :)

http://ld-phasechange.com/images/snollocer's_SS/7.jpg

http://ld-phasechange.com/images/snollocer's_SS/8.jpg

http://ld-phasechange.com/images/snollocer's_SS/11.jpg

Best Regards

[Duniek]

please show side with condensor inlets

[tim-]

it looks the same with one inlet and outlet, you have to make the 90dgr bend your self. looks exactly as the rivacold condensers from the side or unseen condenser (cube).

[Creek Tha Gray]

Load: 220W

http://ld-phasechange.com/images/SingleStage/no.1/7.jpg

REgards

220w = what cpu speed and volt using a q6700 g0 or q6600

[tim-]

I have a unit with almost identical, same compressor, same gas, but another condenser but with same capacity, holds a QX9650@461x9 1.525 Vcore@ ~-38*c measured with K-probe.

cheers
Tim

[mike8913]

what type of controllers do you use now?

[Moc]

Eliwell EM300 Thermometer with NTC probe is that in the last pic if I'm right??

[mike8913]

tim- thanks for the info but i actually was referring to which controller LD uses.

so the question still stands.

[Xtasy]

Hey,

little devil i think you forgot me:P you missed sending me the mounting with my gpu evap. could you send it please?

ill show some pics today of the unit ive done with moc :) ( autocascade )

[LittleDevil]

@mike8913: Like Moc said; Eliwell EM300

@Xtasy: Sorry but I completely forgot, I will send it this week.

Regards

[Xtasy]

@mike8913: Like Moc said; Eliwell EM300

@Xtasy: Sorry but I completely forgot, I will send it this week.

Regards

thx no problem :)

[tjelaw]

Hey LD,

its been silent for some time again... can you please get back to me on PM or MSN asap.

thanks.

[Creek Tha Gray]

can't wait see how the new unit cools a quad

[LittleDevil]

White unit with white sleeving: :p:

http://ld-phasechange.com/images/SingleStage/no.1/8.jpg

http://ld-phasechange.com/images/SingleStage/no.1/9.jpg

http://ld-phasechange.com/images/SingleStage/no.1/10.jpg

Regards

[LittleDevil]

And finished stronger unit: I really like that compressor, it is running way more silent than Electrolux MP14FB.

Temps @ 240W load

http://ld-phasechange.com/images/snollocer's_SS/17.jpg

Finished unit:

http://ld-phasechange.com/images/snollocer's_SS/18.jpg


Kind Regards

[Freddie123]

What compressor have you used?

[LittleDevil]

Aspera NEK 2150GK.

Regards

[bl1zZ]

Great Unit!
It handles 240w at the same temps like my NL11F unit handles 215w :)
Maybe you could pm or icq me what an upgrade costs. =)

Best Regards
Dennis

[LittleDevil]

Carbon one is finished:

200W:

http://ld-phasechange.com/images/Pascal's_SS/1.jpg

http://ld-phasechange.com/images/Pascal's_SS/2.jpg

225W:

http://ld-phasechange.com/images/Pascal's_SS/3.jpg

http://ld-phasechange.com/images/Pascal's_SS/4.jpg

240W:

http://ld-phasechange.com/images/Pascal's_SS/5.jpg

http://ld-phasechange.com/images/Pascal's_SS/6.jpg

http://ld-phasechange.com/images/Pascal's_SS/7.jpg

http://ld-phasechange.com/images/Pascal's_SS/12.jpg

http://ld-phasechange.com/images/Pascal's_SS/14.jpg

http://ld-phasechange.com/images/Pascal's_SS/20.jpg

Regards

[eToh]

wow..dude that thing looks incredible!!:up:

Very nice work.

[tim-]

looks very nice, I like this carbon stylish, :up:

Why not use black bolts for sidepanels and fit the hood as well? ;)

[LittleDevil]

@tim: Because i'm still waiting for them.

Regards

[tim-]

aah, i thought you got them since you have black ones on fan mesh.

regards
Tim

[LittleDevil]

They are different, those are for fans:)

Regards

[mytekcontrols]

Wow!!! Looks as good as, if not better than the higher priced PC cases that are manufactured by the big buck companies. Very nice work indeed :up:

Just curious, what kind of pressures do you run when seeing 200 Watts of heat load?

[LittleDevil]

Unit without case, it will be great for benching.

http://ld-phasechange.com/images/Norz's_SS/4.jpg

http://ld-phasechange.com/images/Norz's_SS/5.jpg

http://ld-phasechange.com/images/Norz's_SS/6.jpg

http://ld-phasechange.com/images/Norz's_SS/7.jpg

Best Regards

[Athens[2004]]

Carbon one is finished:

200W:

http://ld-phasechange.com/images/Pascal's_SS/1.jpg

http://ld-phasechange.com/images/Pascal's_SS/2.jpg

225W:

http://ld-phasechange.com/images/Pascal's_SS/3.jpg

http://ld-phasechange.com/images/Pascal's_SS/4.jpg

240W:

http://ld-phasechange.com/images/Pascal's_SS/5.jpg

http://ld-phasechange.com/images/Pascal's_SS/6.jpg

Regards

nice work with some super b quality [as usual] & one question .

You start from 200w showing the voltcraft wattage meter and after your uei dt-200 under the load .

at the last voltcraft pic you show us some 240w load but at the uei dt 200 photo under load the voltcraft [at the corner on the same pic] shows 180w. :confused:

[LittleDevil]

@Athens[2004] on the last picture is power consumption of second unit without any load.

Best Regards

[LittleDevil]

@225W load:

http://ld-phasechange.com/images/Norz's_SS/10.jpg

Regards

[teyber]

jeeze beutiful!
athens, nice find XD i would have never noticed that. I believe you however LD.
And LD, when did you get the flulke 52?

Regards

[LittleDevil]

And 240W temps:

http://ld-phasechange.com/images/Norz's_SS/11.jpg

@teyber: I got it from USA.

Regards

[tiborrr]

Unit without case, it will be great for benching.

http://ld-phasechange.com/images/Norz's_SS/4.jpg
http://ld-phasechange.com/images/Norz's_SS/5.jpg
http://ld-phasechange.com/images/Norz's_SS/7.jpg

Best Regards

Suction line is kind of short if this should be intended for benchmarking.

http://ld-phasechange.com/images/Pascal's_SS/6.jpg
Easter egg photo. 180W while claiming to be 240W load :)

[LittleDevil]

@tiborr: Look that post: http://www.xtremesystems.org/forums/showpost.php?p=2605055&postcount=440

If it's problem that you don't belive me, i can make a video and you will see temps and load tester from 0W to 240W

Best Regards

[LittleDevil]

You can start downloading, temps are even better with little tuning and that unit is the same as last time ;)

http://ld-phasechange.com/images/Norz's_SS/ss.WMV

Regards

[tim-]

that flex is proberbly enough. of course it depends on how you run it, with a 200mm high benchtable it's a bit short but i guess thats not the situation.

nice capacity and temps there LD :)

[Athens[2004]]

LittleDevil @ Thnx for the explanation , :) theres no need to open the Video , i believe you [ if I dont , I wouldnt ask you ;) ]

[Norz]

And 240W temps:

http://ld-phasechange.com/images/Norz's_SS/11.jpg

Regards

..hm, that looks like mine unit..lol... Nice tuning LD, idletemps means nothing, load is everything:D

You are the master of perfection,respect.......

[LittleDevil]

Idle temps are about -50°c, you can look video too;)

Regards

[Cpt.Planet]

That isnt real carbon fiber is it? Looks like vinyl to me.

[tim-]

it's vinyl no question about it. LD has also mention that.

[Shark-357]

Superb work my friend :clap: carbon look is very nice :up:

[DagoDuck]

Well done my friend. :up:

Best regards,
DagoDuck

[NysoO]

Hey littledevil, a "simple" question. Would it be possible to chrome the compressor? Would look so damn nice under some blue lightning in a silver V2100
case.

[tim-]

painted compressor means no warranty, but for sure, it's no problem to paint it with "chrome".

but i wouldn't recommend v2100, to small airflow true the front since you have the door in front. v2000 is a better choise.

regards
Tim

[NysoO]

painted compressor means no warranty, but for sure, it's no problem to paint it with "chrome".

but i wouldn't recommend v2100, to small airflow true the front since you have the door in front. v2000 is a better choise.

regards
Tim

Yeah, thats true about the V2100.
I was actually thinking of real chrome plating, would that be possible? I mean, painting with "chrome" is a bit "tattigt" ;)

[tim-]

i don't think so. since the method to make the crome can cause issues for the sealing between electrical socket and shell.

if you want to make it "chrome" either paint it or polish it and clearcoat. to be honest, I would keep it black.

[NysoO]

Course, I'm simply brainstorming a bit :)

[[XC] 2long4u]

You could chrome it if you make sure to cover the electrical plug with wax. And make sure you don't get acid in the compressor.

[LittleDevil]

Finished unit:

http://ld-phasechange.com/images/Norz's_SS/12.jpg

http://ld-phasechange.com/images/Norz's_SS/13.jpg

http://ld-phasechange.com/images/Norz's_SS/14.jpg

Regards

[Brezodor]

Nice Work :up:

[Fujimitsu]

Nice work, clean and sleek.

[Norz]

:D

Thx LD....

Next stop for that nacked SS is Norway.

Cant wait to test it, i know it will perform good.

You are a true master in youre profession, be proud of it :clap:

--cheers--

[LittleDevil]

Here is Rotary unit for my friend.

http://ld-phasechange.com/images/brezodor's_rotary/1.jpg

http://ld-phasechange.com/images/brezodor's_rotary/2.jpg

http://ld-phasechange.com/images/brezodor's_rotary/4.jpg

http://ld-phasechange.com/images/brezodor's_rotary/5.jpg

Regards

[DagoDuck]

Very well done. What kind of model is this compressor? :)

[gosmeyer]

Looks like that one is going to be built to your same high standard !

[tim-]

I'm just curious. those condensers is rated for 700watts, and what rotarys do you use?

what loadtemps do you expect?

well I have to say, I'm very happy with the size of those rotary cases (i got two my self without the gauge and controller holes).. but it's enough space to build autocascade in there, and I will build one for my self (already in progress). might try that instead?

regards
Tim

[DagoDuck]

It looks like a LG NJ282P R-407C or LG NJ236P R-407C compressor.

[teyber]

It looks like a LG NJ282P R-407C or LG NJ236P R-407C compressor.
I thought LG's had much smaller accumulators... but that logo sure looks lg.

nice work ld!

[tim-]

teyber:
it also depends on refrigerant ;)

[LittleDevil]

New backplate issulation for SS and POTS.

http://ld-phasechange.com/images/issulation/1.jpg

Regards

[Xtasy]

Hey LD,

i still need the GPU Mounting ;)

[LittleDevil]

@Xtasy: PM me your details please.

Here are some pictures of finished unit.

@250W load.

http://ld-phasechange.com/images/brezodor's_rotary/10.jpg

http://ld-phasechange.com/images/brezodor's_rotary/12.jpg

http://ld-phasechange.com/images/brezodor's_rotary/13.jpg

http://ld-phasechange.com/images/brezodor's_rotary/14.jpg

http://ld-phasechange.com/images/brezodor's_rotary/15.jpg

http://ld-phasechange.com/images/brezodor's_rotary/16.jpg

Regards

[godmod]

the controller looks a bit crooked :shrug:

[LittleDevil]

It is not, just strange view. :up:

regards

[DagoDuck]

godmod, that was noticeable to me also. :D Could you make a few pictures from the inside, LittleDevil?

[S1mon-]

Do these SS units make a lot of noise?

[Fujimitsu]

Do these SS units make a lot of noise?

Not sure if you meant LD's units... or just single stages in general.

Either way, the loudest part is probably going to be the fan on the condenser. The compresser in a single stage is usually just a low faint hum.

[LittleDevil]

Rotary unit is pretty loud, compressor is louder than fan.

NL11F units are quiet, we can say that fan on condensor is louder than compressor. ;)

Regards

[Norz]

Ok, finally after like 3 weeks, Norwegian Toll/customs released this package from LD.
I have been waiting, and waiting..lol
But, it was so worth the wait, the unit described in earlier posts here is simply awesome:D

LD has done a very good job in finetuneing this little SS.
Im goona use it for my Xeons (3060,3070 and X3220 quad)

From what i have tested so far, it seems like i can run my quad easy on 1.65vcore 2 cores, have not tested load on 4 cores yet, only fast wprime.
I have a G0 quad, possible they runs cooler than other not G0 chip.
Because i got good temps, almost too good, so i wanna test with another tempmeter before i give temps here. And run wprime and 3Dmark 06 cputest

Also mine C2D Xeon 3070@1,635vcore was flying under this SS.
Have a pic of a fast suicidescreen 2 hours ago, i was having no problem benching pi, pifast, wprime on 1,635vcore 1 and 2 cores enabled, only a few celcius different from 1-2 cores.


I need test some moore, and find the limit on this SS, so far its looking really good. Im very happy so far.

Thanks LD:cool:

--cheers--

MB used is Asus P5K vcore, vdroop and vdimm modded.
Crucial PC8500 Ballistix@2.4vdimm
ATI pci VGA
Seasonic 700w psu

[LittleDevil]

Benching unit

http://ld-phasechange.com/images/Cupra's_SS/1.jpg

Almost 250W load:

http://ld-phasechange.com/images/Cupra's_SS/2.jpg

Temps on 247W load:

http://ld-phasechange.com/images/Cupra's_SS/3.jpg

Finished:

http://ld-phasechange.com/images/Cupra's_SS/5.jpg

http://ld-phasechange.com/images/Cupra's_SS/6.jpg

Regards

[LittleDevil]

Really nice Norz, we are waiting or more results ;)

Regards

[tim-]

do you run 507 or 402 in those units?

[marru]

I see you keep pictures of naked men in your workspace. Is that your inspiration for the nice looking units you build?

[LittleDevil]

I see you keep pictures of naked men in your workspace. Is that your inspiration for the nice looking units you build?

LOL:D :D , my sistem put that calendar there, i didn't notice it before :ROTF: :ROTF:

Regards

[tim-]

ales, nothing wrong to have "a thing" for boys as well ;)

but you didn't answer my question, r402 or 507? ^^

[LittleDevil]

@tim: ;)

And gas is R507.

Best Regards

[n00b 0f l337]

Incredibly nice job Little D.

[tim-]

yea absolutly.. thumbs up for you :up:

[wawabob]

another result with ss by LD :

Cpu-z Maxscreen: 5028Mhz at -43,6°C :D

Cpu: Intel Pentium D 915
Mobo: Asus P5WD2-E Premium

Thanks LittleDevil!! :up:

http://wawabob.free.fr/images/o-c/d915/Cpu-z_5028.png

[LittleDevil]

Great job there ;)

Another Single Stage Carbon Edition ;)

http://ld-phasechange.com/images/AuroraBorealis's_SS/2.jpg

http://ld-phasechange.com/images/AuroraBorealis's_SS/5.jpg

http://ld-phasechange.com/images/AuroraBorealis's_SS/6.jpg

http://ld-phasechange.com/images/AuroraBorealis's_SS/8.jpg

http://ld-phasechange.com/images/AuroraBorealis's_SS/9.jpg

Regards

[Fr3akyPete]

This one is a true beauty!

[yngndrw]

Very nice unit, but a bit of a mess around the head's braiding ?? :o

[[cTx]biglipzit]

Very nice unit, but a bit of a mess around the head's braiding ?? :o

I am sure that he puts neoprene tape around that whole end because the slit in the tube foam is still visible.

[LittleDevil]

Very nice unit, but a bit of a mess around the head's braiding ?? :o

I need to do load test before i finish it. ;)

Regards

[LittleDevil]

200w load:

http://ld-phasechange.com/images/AuroraBorealis's_SS/10.jpg

245W load:

http://ld-phasechange.com/images/AuroraBorealis's_SS/11.jpg

Regards

[tim-]

looks very good
when will you try something new? :p

[DagoDuck]

How long is the capillary tube, which you used in the unit? Which diameter? Which pressures do you have? Static pressure? Refrigerant?

THX

[LittleDevil]

How long is the capillary tube, which you used in the unit? Which diameter? Which pressures do you have? Static pressure? Refrigerant?

THX

Gas is R507, other specs are TOP secret :D

Regards