Anybody Have Issues with the DFI Expert & x1900xtx?

[s7e9h3n]

I can't seem to boot with my x1900xtx in a DFI Expert Board. OPB says he has the same problem. Anybody else experiencing this?

[SIOUX]

What PSU are you using my friend??:)

[s7e9h3n]

What PSU are you using my friend??:)
pcp&c 510....

[HeavyH20]

No problems here. Pulled a card, dropped it in, and up it came.

And, that PSU is more than enough.

[SIOUX]

pcp&c 510....


you tryed another??

[Wa77x]

Possibly try a different BIOS. Find out which BIOS the guy ^^^ up there has because he says he can run it fine.

[s7e9h3n]

you tryed another??
i can try my other pcp&c 510 - but it doesn't have an 8 pin connector. Have you heard of any issues with the board and the card? The two red lights on the card come on and stay lit. The board doesn't even respond to the reset button. My debug card displays "FF" which usually is a sign that the cpu is dead, but I'm pretty sure it's OK....:confused:

[s7e9h3n]

Possibly try a different BIOS. Find out which BIOS the guy ^^^ up there has because he says he can run it fine.
I'm pretty sure it wouldn't have anything to do with the bios, but I can't even get booted to flash it :p:

[SIOUX]

i can try my other pcp&c 510 - but it doesn't have an 8 pin connector. Have you heard of any issues with the board and the card? The two red lights on the card come on and stay lit. The board doesn't even respond to the reset button. My debug card displays "FF" which usually is a sign that the cpu is dead, but I'm pretty sure it's OK....:confused:


I have heard of problems with no boot on the expert do to ram. But most people fix it with booting with just 1 stick. also i see some people have problems with some PSU and the expert, but mostly th ocz 600w

[blind_ripper]

think thate te ocz600watt is killing my dfi's killed my rdx200 and my nf4 ultra-d .
it can not suply power for the x1900xtx @ 735/855 and a x2 @ 3.15ghz @ 1.72vcore

[CrashOv3r1De]

I had the DFI Expert and powercolor x1900xtx and had no probs booting whatroever. System is in my sig

[CHUDA]

I am currently running an Expert (Bios: 11/02/2005), OCZ 600W and BBA x1900XTX. No problems yet...

I hope you resolve it soon s7e9h3n, I am waiting for some nice clocks. :)

[mrlobber]

Yeah, an Expert + Sapphire X1900XTX working nicely here as well on PCP&C PSU (850W, though).

[s7e9h3n]

thx for the feedback :toast: - I think I'm having issues due to condensation on the card....

[OBR]

I have no problem with "Experts" and X1900XTXs.

[irenic]

i also have no prob with them.. Expert + gecube x1900xtx + Enermax coolergiant 600w.. currently waiting for my fortron 700w to arrive..

[perry_78]

I have no problem with "Experts" and X1900XTXs.

Czechia has to be the stupidest one word name for a country I heard in a long time :D

Jinak pozdrav z dánska :) Sám mam jen nf4 sli-dr expert, a jeste pak sli-dr.