PDA

View Full Version : Mushkin PC5300 Not bad alternative to Fatty D9's


JNav89GT
02-05-2006, 09:20 AM
Got these to test from Mushkin. Thought would make a good excuse to try pressler at same time. Ram I'm still maxing but cpu is maxed 24/7 stable here and 305 fsb results in graphics corruption although 2d still semi stable
here at 300 I can loop 3d all night and is very stable. Runs HOT HOT HOT even on water, but over nice system. Well back to ram ;)

here u go. Lemme know what u think. Other tests u might wanna see

System specs
Asus P5WD2 955x
Pressler 920@4.2ghz 300fsb
Mushkin XP-PC5300 DDR-2 believe it's 3-3-3-x rated, pfft I don't go for stock ;p lol! although FYI they will run just a hair over 700mhz at default timings. My best performance cam from laxing timings a bit and running more mhz ;).
cooling-alphacool basic kit except upgrade to Nexxos XP block.
Connect 3d X800GTO(12pipes--wouldn't mod but nice oc to 560/550 on stock air)


first set at timings 5-4-4-18
tras very senstiive and to achieve max clocks use 18. voltage 2.2v btw
http://www.xtremesystems.org/forums/attachment.php?attachmentid=43059&d=1139160007
http://www.xtremesystems.org/forums/attachment.php?attachmentid=43060&d=1139160007
http://www.xtremesystems.org/forums/attachment.php?attachmentid=43061&d=1139160007

JNav89GT
02-05-2006, 09:22 AM
this set at timings 4-4-4-18 voltage 2.2v
everything else unchanged :)

not a ton of gain in either sandra or super pi, but something non-the-less!
3d01 I sense some run variance as I wouldn't have expect that big of difference. Maybe I will go back to
5-4-4-18 and re-run something seems like a bit off there

Overall Impressed with ram. 2gb in AMD64 AM2 :) sexy at this speed. Can't wait hehe!:fact: :woot:
http://www.xtremesystems.org/forums/attachment.php?attachmentid=43062&d=1139160086
http://www.xtremesystems.org/forums/attachment.php?attachmentid=43063&d=1139160086
http://www.xtremesystems.org/forums/attachment.php?attachmentid=43064&d=1139160086

JNav89GT
02-05-2006, 09:44 AM
As I suspected
1st run at 5-4-4-18 must have been a bad run or maybe I changed my graphics clocks w/out realizing.

here is rerun for sure at same clocks as the 4-4-4-18
practically no diff :O

wampir
02-05-2006, 10:30 AM
what about max 4-3-3 and 3-3-3 ???

ozzimark
02-05-2006, 10:45 AM
what about max 4-3-3 and 3-3-3 ???
something tells me it's pretty low.

JNav89GT
02-05-2006, 11:12 AM
it's around 700mhz at 3-3-3-x
and I think about 750-800 at 4-3-3-x

my best performance is at this level as cpu maxes here ;)

Eldonko
02-05-2006, 01:16 PM
Good stuff JNav89GT :toast: This RAM + AM2 = :slobber: :slobber: