what size tec for 6800NV

[littleowl]

Thanks noob! I thought that it wouldn't work but I was hopping!! What kind of psu would I need and where do I get one that would work??

[Mr. Tinker]

whoa, server time error.

post order should be 3,4,1,2.

[littleowl]

What size tec would I need to use on a 6800gt? I have the dd nv68 and was thinking about putting a tec on it. I have a meanwell s-320-12 running a 226 on the cpu! What size would I need to run on the video card and can I run it on the meanwell as well as the 226???? Thanks for everyones help and suggestions

[n00b 0f l337]

The size of tec that you can possibly run with the 226 will not be enough for the 6800NV. Therefore its time to get a new psu or to do something different.

[littleowl]

man this thread got really messed up!! :slapass:

[n00b 0f l337]

Ebay's a good place.
Search for...

"Switching 12v" and skim thru

[littleowl]

Ebay's a good place.
Search for...

"Switching 12v" and skim thru


what would be best 12v 6a or 12v 4a?? I liked the one here http://cgi.ebay.com/High-Capacity-12V-6A-Switching-Power-Supply-for-CCTV_W0QQitemZ6031597986QQcategoryZ20589QQssPageNa meZWDVWQQrdZ1QQcmdZViewItem
Thanks again for the input!

[Mr. Tinker]

the more amps, the better. 6a is not going to cut it.

[littleowl]

the more amps, the better. 6a is not going to cut it.


hum thanks Tinker I don't really see anything but 4 and 6 amps! I will have to keep looking! That is ok I don't really have the money right now anyways! I am just looking at what I would like to do in the near future!! Thanks to you both!

[speed bump]

I don't think 226 is two small my 6800nu is running an 80watt@7v for about 21watts and it will keep my card just warm enough not to cold bug running at 425core 1.2v 12p/6v

[littleowl]

LOL I like that "bananal"

[menlatin]

search for a meanwell s320-12 300watts, 8.8-13.4v, 25A

[littleowl]

menlatin I have a s320-12 but how do I know what the watts are on it! I do know mine is 25A! Thanks for your help

[n00b 0f l337]

320 is wattage,
12 is voltage.
320 / 12 = amperage!
26.66 amps.
Closer to 15 if I remember the meanwell's.

[littleowl]

your right n00b I am checked the amps with a meter and it was close to 15!! I didn't know the 320 was the Wattage thanks for the info!!

n00b what size/type power supply do you recomend!!

[n00b 0f l337]

It will be around 15 amps or so until you apply a load.
Should then be around 25 amps once your running something.
That powersupply should work just perfect.

[littleowl]

but I want to run 2 tecs and water pump off of the same power supply!!
Is that possible?