TeamGroup Kit 2X1GB pc4000 UCCC rev.D

[gigi77]

TEAMGROUP DDR500 2x1GB 3.4.4.8

Ic Samsung UCCC


http://img422.imageshack.us/img422/2504/uc12ih.jpg


System Configuration

Fx57 (molti at 9x)
Dfi nf4 sli-dr bios 623-3
6800 GS by Club3d 425/1000
Windows Xp Sp2
Forceware 81.95 whql

Settings all Motherboards DFI for BEST PERFOMANCES with this ram

CPC = Enabled
CAS Latency(CL) = 3
RAS to CAS(Trcd) = 4
Min RAS# Active time(Tras) = 8
Row Precharge Time(Trp) = 4
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 14
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 1
Read to Write Delay(Trwt) = 3
Refresh Period (Tref) = 3210
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = AUTO
Skew Value = 0
DRAM Drive Strength = auto
DRAM Data Drive Strength = auto
Max Async Latency = 8ns
Read Preamble Time = 5ns
Dram time = Fast
Idle Cycle Limit =256
Dynamic Counter = Enabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable(4burst)

[gigi77]

The new revision IC samsung like low voltages, 2.6-2.7v

I Show SPi, 3dmark01, Memtests for Best Stability :)


285mhz Show Pi 32mb 3.4.4.8

http://img41.imageshack.us/img41/5986/285mhz4fx.jpg (http://imageshack.us)

[Revv23]

Not Bad.

[gigi77]

Not bad!

GO UP....

Luigi

[Lestat]

nice how much is that kit and where can it be purchased ?

[Revv23]

Not bad!

GO UP....

Luigi

Is something i said wrong?

thats not bad, ive seen G.skill UCCC 2x1gb running at 300mhz, so yeah, 285 is not bad, but its not the greatest thing ever either.

You got a good set of ram there, congrats.

[gigi77]

290mhz 3.4.4.8 :)

http://images2.pictiger.com/images/d7/379a376114f3a4627549e4d8e53b49d7.jpg[/

[gigi77]

295mhz show 16mb Spi

http://images2.pictiger.com/images/35/aeb6c261ba69b991334c071998871735.jpg

[Revv23]

Wow, now i am very impressed indeed.

What got you up there? Or had you just not tried yet?

[nn_step]

Very nice where can I pick up a set?

[gigi77]

Very nice where can I pick up a set?

1 kit of 20 reached this perfomances!

:slobber:

[nn_step]

ok but where Can I buy one.. So that I can compair it with a Known good set of sticks

[gigi77]

ok :)

[high5]

gigi, how about some pics of the RAM... preferably without the HS. :)

the pic you posted here is old one, from here (http://www.xtremesystems.org/forums/showthread.php?t=84655)

[nn_step]

How about a nice link to an online seller that ships this to the states

[gigi77]

gigi, how about some pics of the RAM... preferably without the HS. :)

the pic you posted here is old one, from here (http://www.xtremesystems.org/forums/showthread.php?t=84655)

ok!

the MAX Scores

http://img32.imageshack.us/img32/771/3007cn.jpg (http://imageshack.us)

[gigi77]

SHOW 3D perfomances....

[gigi77]

3D Perfomances :dup:

http://img16.imageshack.us/img16/921/3dmk2857jw.jpg

http://img16.imageshack.us/img16/4702/3mk052903mb.jpg

http://img16.imageshack.us/img16/2242/2953d3up.jpg

[nachthymnen]

Great Gigi!!!
I have buy my 2 kit of dual channel from 2GB... 1 Micron and 1 Samsung UCC...I will try soon:)
Price are very good!!!

[Print]

Is this UCCC rev.D or rev.C?

rev.C http://www.xtremesystems.org/forums...&highlight=uccc

rev.D http://www.xtremesystems.org/forums...ead.php?t=87294

[gigi77]

Is this UCCC rev.D or rev.C?

rev.C http://www.xtremesystems.org/forums...&highlight=uccc

rev.D http://www.xtremesystems.org/forums...ead.php?t=87294

Rev.D is in mass production after chinese new Year.

Sorry for my error

Luigi

[high5]

good job on drawing attention though... :rolleyes:

[nachthymnen]

Today I have make a fast run with my 2x1GB Teamgroup pc4000(Micron chip)
http://img398.imageshack.us/img398/8247/micron3do.th.jpg (http://img398.imageshack.us/my.php?image=micron3do.jpg)
It's very good ram: (Vga default)
http://img230.imageshack.us/img230/2977/013000vgadef0bk.th.jpg (http://img230.imageshack.us/my.php?image=013000vgadef0bk.jpg)

Spi 8M @ 255 with 2.7V and timings soft...possible to improve the settings...
http://img230.imageshack.us/img230/926/spi8m255mhz3ht.th.jpg (http://img230.imageshack.us/my.php?image=spi8m255mhz3ht.jpg)

[gigi77]

Go Up Nachtyman!

[nachthymnen]

I'm testing the 2x1GB micron and it's very funny in OC...not the best settings but not a bad start...:D
SPI 16M @ 250 1:1 3/3/3/7...2.9V just for test...close 16M also @ 2.7/2.8v.
http://img70.imageshack.us/img70/9260/spi16m250mhz9iq.th.jpg (http://img70.imageshack.us/my.php?image=spi16m250mhz9iq.jpg)

[nachthymnen]

SPI 32M @ 250mhz 1:1 3/3/3/7 with 2.8V...
Absolute stability.
http://img69.imageshack.us/img69/7906/spi32m25033375wd.th.jpg (http://img69.imageshack.us/my.php?image=spi32m25033375wd.jpg)

[Kenetixx]

Looks pretty good this ram, and good price aswell, probably one of the cheapest 2 gig kits you can get in Oz

[nn_step]

OK they are good Ram
But what use are they if I can not find a single Place in the States that sells them?

[nachthymnen]

Testing Samsung UCC 2x1GB...looks very good:
spi 32m @ 270 3/4/4/7
http://img78.imageshack.us/img78/5360/spi32m270mhz0pl.th.jpg (http://img78.imageshack.us/my.php?image=spi32m270mhz0pl.jpg)

spi 16m @ 295 3/4/4/8
http://img86.imageshack.us/img86/3790/spi16m295mhz5lz.th.jpg (http://img86.imageshack.us/my.php?image=spi16m295mhz5lz.jpg)

Spi 1m @ 300 3/4/4/8
http://img78.imageshack.us/img78/2251/spi1m300mhz7cl.th.jpg (http://img78.imageshack.us/my.php?image=spi1m300mhz7cl.jpg)

[gigi77]

Nice Results!

[nachthymnen]

Nice Results!

TKS Gigi!!!
This ram it's very funny...
295mhz it's easy to obtain:banana:

SPI 1M @ 302(DDR604MHz) 3/4/4/8
http://img62.imageshack.us/img62/561/spi1m302mhz6gl.th.jpg (http://img62.imageshack.us/my.php?image=spi1m302mhz6gl.jpg)

Not bad for a 2GB kit...

[nachthymnen]

I like this ram...

SPI 32M @ 295(DDR590MHz) 3/4/3/8
http://img53.imageshack.us/img53/4853/spi32m295mhz3pk.th.jpg (http://img53.imageshack.us/my.php?image=spi32m295mhz3pk.jpg)

[tHe_jOkeR]

just ordered one of these,
dunno which rev.:confused:
but well lets see ;)

greetz

[tHe_jOkeR]

how can i see which rev. it is?

[rick_fx]

:cheer: Where can we buy these? And for what price? :cheer:

[e-jump]

looking forward to the_joker's result, as im on neo2 too :)

but for my case, i cant go further than ddr520 [even have some memtest error]
the rams have no error at rated speed (ddr500)
flashed to SE 1c.tccd mod bios also a no go [even my epox have same result]
timings followed Gigi's

btw, mine is 0603w batch :sad:

so, either my kit a dud, winnie cant handle 2gb at high speed, or nforce3 limitation? :(

[gigi77]

looking forward to the_joker's result, as im on neo2 too :)

but for my case, i cant go further than ddr520 [even have some memtest error]
the rams have no error at rated speed (ddr500)
flashed to SE 1c.tccd mod bios also a no go [even my epox have same result]
timings followed Gigi's

btw, mine is 0603w batch :sad:

so, either my kit a dud, winnie cant handle 2gb at high speed, or nforce3 limitation? :(


it's a nf3 limitation :)

[e-jump]

it's a nf3 limitation :)

any article/fact/discussion/test etc on that?

my last resort would be getting an ultra-D, altho might not be a good investment for my winnie :eek:

p/s: hey others, whats the results?:D

[Repoman]

nachtymnen, see if that Micron will do 3-3-3-8 like Ballistix :)

Hopefully they don't die like the ballistix always did, it would be a bad mistake to put out RAM like that for a new company :nono:

[tHe_jOkeR]

@ e-jump

this neo sucks

i cant get it stable over 270 without tweaking(how should I? lol) but they do this with 2,5V
that sucks really, I'll get a dfi soon than i will try this suckers again.
but Iam pretty sure its the nf3, dunno why.....feeling;)

greetz

[e-jump]

@ e-jump

this neo sucks

i cant get it stable over 270 without tweaking(how should I? lol) but they do this with 2,5V
that sucks really, I'll get a dfi soon than i will try this suckers again.
but Iam pretty sure its the nf3, dunno why.....feeling

greet

well, i hope someone who have a good stick can test on nf4 and nf3 board..
and prove its nf3 limitation/prob etc..

coz getting an ultra-D would be like "another instant-noodle" month for me :eek:
if only i can test my winnie's mem controller strenght >_<

@the_Joker
what bios did u use ? u got 15++mhz higher than me :eek:

[gigi77]

i use 510/2 and 623/3 :)

[tHe_jOkeR]

I use the 1.9 because in 1.B i cant get into the Bios, dunno why...

and there are no other dualcore bios out there!?

[gigi77]

I use the 1.9 because in 1.B i cant get into the Bios, dunno why...

and there are no other dualcore bios out there!?

i not says new Bios for MSi nf3, sorry :(

[[cTx]Philosophy]

HMM verry intersting, eventhough noone has shown liny to purchase these as of yet..
I wish my mobo had all the options that the DFI's do, I really wanna run ra mad cpu 1:1

[psy^]

well, i hope someone who have a good stick can test on nf4 and nf3 board..
and prove its nf3 limitation/prob etc..

coz getting an ultra-D would be like "another instant-noodle" month for me :eek:
if only i can test my winnie's mem controller strenght >_<

@the_Joker
what bios did u use ? u got 15++mhz higher than me :eek:


I don't think it's an NF3 limitation :)
http://members.optusnet.com.au/~psymonk/276x9%20SuperPI%2032M.JPG

Totally different sticks but it's UCCC still.
Maybe i just have better week chips on these dimms heh

[turtle]

I think it's a winnie mem controller limitation.

All my sets of VX have been limited to 260 as well. I'm not positive, because I havn't looked at it for ages, but I think we have a similar revision/stepping, which mem controller sucks.

Sorry for OT. Great results guys...Hope these stay alive unlike peeps' ballistix, I may just have to pick some up. :)

[tHe_jOkeR]

I don't think it's an NF3 limitation :)



but iam pretty sure that it is :P

[psy^]

but iam pretty sure that it is :P

Heh well, maybe it's just the neo2 then :p

You can see in my screenshot being on an nForce3 motherboard hasn't hampered the overclock of this UCCC memory (much) :banana:

[nn_step]

Heh well, maybe it's just the neo2 then :p

You can see in my screenshot being on an nForce3 motherboard hasn't hampered the overclock of this UCCC memory (much) :banana:
Not a chance in hell my Neo2 platty went just as far as my Ultra-D.. so I hightly doubt it has to do with the chipset... Some chips are just better than others

[tHe_jOkeR]

Not a chance in hell my Neo2 platty went just as far as my Ultra-D.. so I hightly doubt it has to do with the chipset... Some chips are just better than others

k i use a modded bios now, well lets see....

btw...this sticks look amazing ;)

[tHe_jOkeR]

update...

I've tested the 1.b modded Bios and cant get itstable over 260...
lol

[e-jump]

im now trying NFM's 180(Rev.3) based on bios 1.8..
still a no go.. maybe my rams need xtreem burn-in ~__~

maybe we should continue discuss bout bios over here
http://www.xtremesystems.org/forums/showthread.php?p=1282934#post1282934

[tHe_jOkeR]

http://img112.imageshack.us/img112/2888/2758m9fr.th.jpg (http://img112.imageshack.us/my.php?image=2758m9fr.jpg)

for now...

[gigi77]

not Bad! for nf3 ;)

[knob]

Does anyone know where I can score these RAM in Australia? Which revision are u running again Gigi?

[Xtreem Tech]

Does anyone know where I can score these RAM in Australia? Which revision are u running again Gigi?
Dear Knob,
Hello! We have an Austraia Sole Dealer now.
Their name is Nintek.com.au
If you have any interest, please ask them any time,
I think they will be more than glad to serve you.
Thanks for the interest,:)

[nf4]

For every one who is asking where to buy these in america

http://www.tankguys.biz/advanced_search_result.php?search_in_description=1&keywords=team&x=0&y=0&pfrom=&pto=&categories_id=