Daveb2012
01-17-2006, 02:03 AM
Well im going to post my settings below. I am happy with my results just wondering if I can get any thing more out of this ram? I am running 1:1 at 2.6v with +.03 enabled.
right now ram is at 268mhz. Im at 275 when cpu is clocked to 3030mhz but I have to use too much voltage to stay their and for some reason i get problems with BF2 if I pass 3ghz. So here are the rest of my settings, any advice I would aprecieate on what I can try to change to get to 280+ mhz with out increasing FSB.
cas/tcl=3.0
cpc=enabled
trcd=4
tras=8
trp=3
trc=7
trfc=14
trrd=2
twr=2
twtr=2
trwt=3
tref=auto
bankinterleave=enabled
twcl=1
dqs skew=auto
dqs value=0
dram drive strength=Level 8/Normal 4 (depending on bios)
dram data strength=Level 3
Max Async Lat.=8.0ns
Dram response=normal or fast (doesn't matter at all)
Read Preamble=5.0ns
IdleCycleLimit=16 clocks
Dynamic counter=disabled
R/W Queue Bypass=16x
Bypass max=7x
32-bit granularity=disabled
right now ram is at 268mhz. Im at 275 when cpu is clocked to 3030mhz but I have to use too much voltage to stay their and for some reason i get problems with BF2 if I pass 3ghz. So here are the rest of my settings, any advice I would aprecieate on what I can try to change to get to 280+ mhz with out increasing FSB.
cas/tcl=3.0
cpc=enabled
trcd=4
tras=8
trp=3
trc=7
trfc=14
trrd=2
twr=2
twtr=2
trwt=3
tref=auto
bankinterleave=enabled
twcl=1
dqs skew=auto
dqs value=0
dram drive strength=Level 8/Normal 4 (depending on bios)
dram data strength=Level 3
Max Async Lat.=8.0ns
Dram response=normal or fast (doesn't matter at all)
Read Preamble=5.0ns
IdleCycleLimit=16 clocks
Dynamic counter=disabled
R/W Queue Bypass=16x
Bypass max=7x
32-bit granularity=disabled