Dfi Ultra D bios for bh-5

[Wayway]

I just got the dfi board and was just wondering whats the best bios for the following setup

Amd 3500 Venice
xfx 7800gt
mushkin 3500 level II 2 x 256

thanks

[EnJoY]

Info (http://www.techpowerup.com/articles//other/114/3) | Download (http://www.techpowerup.com/articles/114/images/510-2XCEL2UPDATED.zip)

This is the best bios for BH5/BH6 and UTT. Gives better bandwidth than any other bios, is the most stable and allows for the highest clocks. Took my Mushy lvl2 blacks to 270mhz easy with this bios.

[Dumo]

623

[G H Z]

510-3 fix rocks :cool:

[Wayway]

thanks a lot guys

[corvus_corax]

510-3 fix rocks :cool:
Same here :toast:

704-2BTA and Merlin 0307 are great too.

[M.Beier]

Tony's made a nice bios (704-2BTA), but its for sizzyes, use 702-2, that works, and can help out with coldbug... (DRAM respons: slow) - also alot of other usefull options..

BH5 bw @ 8095mhz, that I beleive is hard on a SD core ;)

[Wayway]

ouch ur all throwing up a lot of beta's , Im just using watercooling and will want to tune my bh-5 to like 270 fsb , just want stable bios with good options

[M.Beier]

ouch ur all throwing up a lot of beta's , Im just using watercooling and will want to tune my bh-5 to like 270 fsb , just want stable bios with good options

2x 512MB, stable at 270mhz? - That just aint gonna happen... - Benchstable, might, with a bit of luck - memtest stable, hell no :slapass:

702-2 got all the options you can think of.

[Lastviking]

Any compared the New FX60 bios with the anothers?

[Wayway]

no there 2 x 256

[Giana]

^^ BTA works fine @ 270 for me with 2x256 Infineon 6-A modified SPD ( cause Inf spd settings suck ) One Stick alone i had ~280 Mhz with old Opti.
Dont have time to test more at the moment.

[Viss]

I like 510-2fix and 704-2bta for me bh5.

[funkflix]

510-2XCEL2 is the best, for high clocks on BH5. :)

Edit: For stable sure, not for suicide runs.

[Fixxxer]

I reached 283MHz with the 623-3 bios.

[gsan]

704-2bta, 255 @ 2-2-2-5 memtest stable.

[Xevipiu]

Fixxxer. I reached 291MHz with the 623-3 bios.

Salut Company

[killingspreez]

i reached....
i reached....
i rached....

you should help him instead of prollying around how much you did (yeah great *lol).
and the only help in my opinion is: try all bios versions and all subversions (-1;-2;-3) and u'll get the best one for your system.

i personally had the best scores with the 7042BTA or sth like that. but try different bioses! really it helps a lot!!! also change the ram slots, sometimes you are able to get higher clocks with other dimms.

mfg

[funkflix]

Any compared the New FX60 bios with the anothers?

As far as i know, it is the 623-3 final, just with support for FX60.

[Fixxxer]

you should help him instead of prollying around how much you did (yeah great *lol).
and the only help in my opinion is: try all bios versions and all subversions (-1;-2;-3) and u'll get the best one for your system.


Yes, that's true.

When I said "reached" I meant to say that my best results were with that BIOS, and I tried to help.

BTW, the only way to get a conclussion about your preferred BIOS is trying lots o' them, as many people and I did.

Mine is 623-3

[Lastviking]

As far as i know, it is the 623-3 final, just with support for FX60.

K thx for info i will try "510-2XCEL2!" then i have only used 702-BTA + FX60 bios for my runs so fair. But i will use 510-2XCEL2 in my AD0 that i got today :toast: to bad the temp is +5c outside now :/

[EnJoY]

K thx for info i will try "510-2XCEL2!" then i have only used 702-BTA + FX60 bios for my runs so fair. But i will use 510-2XCEL2 in my AD0 that i got today :toast: to bad the temp is +5c outside now :/

You'll love it. Better memory bandwidth than any other bios at same settings as other bioses. Thanks for Hellfire. ;)

[Wayway]

ok thanks for all the input i will try the one Enjoy posted first then work from there.

thx will post results soon

[Lastviking]

This sucks i open my S/N 541XXXX box and its are a AD0 but it have same layout like my AB0 nothing are changed....

[Wayway]

whats the Ado and AB0 means

[Jeager]

whats the Ado and AB0 means

Chipset stepping

[macg]

Actually, AD0 is the newer revision of the board. New placement of a capacitor and a different mosfet.