PDA

View Full Version : Wr 400fsb 3-2-2-3 1:1


FUGGER
01-10-2006, 02:09 AM
Intel 955XE ES 12x400FSB 1:1 3-2-2-4 (2 write recovery)
Asus 975X P5WD2-E Premium
Corsair 8000UL @ 2.4v

Validation:
http://valid.x86-secret.com/show_oc?id=62931

:toast:
http://www.xtremesystems.org/forums/attachment.php?attachmentid=42096&stc=1&d=1136945544

http://www.xtremesystems.org/forums/attachment.php?attachmentid=42097&stc=1&d=1136946770

eva2000
01-10-2006, 02:17 AM
Very nice :D

200%absolut
01-10-2006, 02:26 AM
congrats FUGGER :woot:

Jeager
01-10-2006, 02:49 AM
DDR2:stick: ;)

njkid32
01-10-2006, 02:52 AM
Very nice Fugger! The new mobo is much better! Now all you need to do is get the new gas in the cascade and then everyone look out:)

s7e9h3n
01-10-2006, 02:54 AM
Hopefully the prog I just sent him will give us a better idea of what 400 1:1 really means....lol.....

Shinuza
01-10-2006, 03:27 AM
DDR2:stick: ;)
Uh?

Not even 300 2-2-2-5 will keep up :D

Nice fugger, keep it up :banana:

Der_KHAN
01-10-2006, 04:08 AM
Uh?

Not even 300 2-2-2-5 will keep up :D

Nice fugger, keep it up :banana:uuh, i don't geddit. i have like 33ns at 258 2-2-2-5.
so i may have a lower bandwidth but the access time should still be faster, right?

Shinuza
01-10-2006, 04:18 AM
uuh, i don't geddit. i have like 33ns at 258 2-2-2-5.
so i may have a lower bandwidth but the access time should still be faster, right?
It may work like this :confused:

kiwi
01-10-2006, 04:20 AM
uuh, i don't geddit. i have like 33ns at 258 2-2-2-5.
so i may have a lower bandwidth but the access time should still be faster, right?

Don't forget A64 has integrated memory controller

Der_KHAN
01-10-2006, 04:37 AM
good point. so what is the latency of ~250mhz 2-2-2-5 like on the 975X chipset?

Vapor
01-10-2006, 04:37 AM
A lot.

Shinuza
01-10-2006, 05:27 AM
Don't forget A64 has integrated memory controller
I forgot that point :slap:

Mr. Tinker
01-10-2006, 05:34 AM
So it's a RAM speed record or an intel record or an fsb record? I'm not sure what the category would be, because:
400htt numero uno (http://forum.tweak.pl/index.php?act=Attach&type=post&id=1981)
and
400fsb numero dos (http://img55.imageshack.us/my.php?image=htt4004lw.jpg)
were both by sept 22, 2005. Not trying to knock the wind out of anyone's sails.

M.Beier
01-10-2006, 05:55 AM
Nice FUGGER :)

When are you up for 500mhz 1:1 :p:

Uh?

Not even 300 2-2-2-5 will keep up :D

Nice fugger, keep it up :banana:
Disaggree...
2-2-2-5 rocks at 27x-300mhz :S - 2x 512MB ofcause.. (eventhough its 8GB/s, it still owns :))

[XC] Aerosupra
01-10-2006, 06:05 AM
xtreme! :toast:
I aint a native in the Intel platform :stick: , but all I can see the new 975 chipset performing veeery well :fact:
and those ddr2 Corsairs rock on Intel too!
would like some benchies (personally I would really like if you could do a run of pcmark 2002 , yes the old one, cut its pretty on timings :cool: )

Sneaky
01-10-2006, 06:05 AM
damn! nice job fugger!

all i've seen is good from the 8000UL's... maybe i oughta replace my OCZ with a set of these suckers **rubs hands together**

Lastviking
01-10-2006, 06:14 AM
Gj fugger :toast:

Shinuza
01-10-2006, 06:21 AM
Nice FUGGER :)

When are you up for 500mhz 1:1 :p:


Disaggree...
2-2-2-5 rocks at 27x-300mhz :S - 2x 512MB ofcause.. (eventhough its 8GB/s, it still owns :))
:eek: You think 2-2-2-5 is that powerfull? :confused:

BTW if we speak on a 24/7 rig this one will win for sure ;)

Redbeard
01-10-2006, 09:33 AM
Awesome job, nice to see our memory doing so well! Good work!

^don.k's^
01-10-2006, 09:43 AM
I'd say 2x512 ddr2@400 3-2-2-4 >> 2x256 bh5@300 2-2-2-5....

FUGGER
01-10-2006, 11:06 AM
Mr Tinker I am 1:1. The links you provided I am sure are at some other memory ratio where the memory is 300Mhz or less.

450FSB is the current WR for Intel

DeltZ
01-10-2006, 11:09 AM
congrats mr. fugger :P:banana:

Xevipiu
01-10-2006, 12:27 PM
congrats Sir FUGGER :toast:

speed bump
01-10-2006, 12:37 PM
Nice it seems like the i975x might be worth upgrading to for the overclock potential also.

OV3RCLOCK3R
01-10-2006, 01:42 PM
ooooooo, Very nice, Congrats Fugger:)

M.Beier
01-10-2006, 01:57 PM
:eek: You think 2-2-2-5 is that powerfull? :confused:

BTW if we speak on a 24/7 rig this one will win for sure ;)

Disagree :)
cant remember weather its 32 og 36ns I get on my 24/7 settings :S
But my BW is more like 7700MB/s for 24/7 @ SiS, which aint that much.

PM me if you want more info, cause this aint about that, Fugger got a nice result, A64 (DDR1) vs. Intel (DDR2) aint what this thread is about :) *and I dont fancy making FUGGER an enemy :nono: *

cupra
01-10-2006, 02:41 PM
wow FUGGER :toast:
that is totly xtreme, 400mhz at 3-2-2-3:slobber:

macci
01-10-2006, 03:15 PM
Very impressive :toast:

So let's see a Lobby hi at 16x400 eh? :D

Vapor
01-10-2006, 03:18 PM
Very impressive :toast:

So let's see a Lobby hi at 16x400 eh? :DTaking well to Canada, eh? :D

Anyway, FUGGER, what exactly is the 450MHz WR for? 4-3-2? 1:1?

FUGGER
01-10-2006, 03:23 PM
Tonight I will run some 3D but I wont be able to run 16x, more like 14x on vapo.

I am still finding the top end of this board and I need the NB voltage mod. My board is a bit weak at 1.59v and I need more like 1.7v

I tried memtest 86+ and it does not show speed or timing and a bit bugged on reporting bandwidth too.

vapb400
01-10-2006, 03:27 PM
Is CPU clocking better on p5wd2 or p5wd2-e? is the gigabyte 975x comparable

Byron
01-11-2006, 02:33 AM
any other memory related benches of that "THING"? (sisoft, everest, etc)

btw, what program do u use to adjust the timings of the mem (Asus P5WD2 mobo) within windows?

Cheers

GoThr3k
01-11-2006, 05:05 AM
what voltage trough the memory
very nice result though

Byron
01-11-2006, 05:10 AM
first post,

Corsair 8000UL @ 2.4v

Fixxxer
01-11-2006, 05:44 AM
Impressive! Good job, Fugger! :clap: :banana:

GoThr3k
01-11-2006, 05:53 AM
first post,

Corsair 8000UL @ 2.4v
sorry, missed that :slap:

SIOUX
01-11-2006, 04:04 PM
Amazing result fugger:)

FUGGER
01-11-2006, 04:31 PM
The 955X board was a better overclocker with the volt mods, next break down I will mod this mobo.

I was playing with clocks last night and with stock mobo it doesnt want to boot past 5.3Ghz into windows.

I am picking up a Gigabyte G1 board to test as well.

Byron
01-11-2006, 04:35 PM
test Fatha, till the electrons melt down http://img293.echo.cx/img293/4732/chatsmiliescom8921zb.png

Revv23
01-12-2006, 12:21 AM
wow 2.4v.. impressive.

[XC] Aerosupra
01-12-2006, 08:34 AM
wow 2.4v.. impressive.

I cant wait to see ddr1 voltages flowing through ddr2 sticks :D

Willis
01-12-2006, 09:53 AM
What's superpi 1M saying?:D

[cTx]Philosophy
01-12-2006, 10:07 AM
Awesome work fugger, I would also like to see sandras band tests as well :)

CrimeDog
01-12-2006, 11:21 AM
is that just an amazing set of ram or does the i975x help?

mad mikee
01-12-2006, 06:58 PM
Work units / day can it do for Rosetta :hrhr:

Another wonderful job by da BOSS! :up: :toast:

[XC] moddolicous
01-12-2006, 07:07 PM
Mad Mikee, thats EXACTLY what I was gonna ask, lol. Looks like some good ram there fugger. That, paired up with a 670 @ 7.2ghz (18x400) 3-2-2-3 could be a pretty good match up.

FUGGER
01-12-2006, 11:11 PM
Testing the Gigabyte G1-975X atm, I have another P5N32 to test right behind it.

mikeguava
01-12-2006, 11:44 PM
Just in the middle of some quick LN2 670 runs on the Gigabyte - board is messy for low lat mem timings - Asus will be the much better option for xtreme stuff it appears on first glance.

biohead
01-13-2006, 04:54 AM
wonderful! :thumbsup:

isnt it a bit inaccurate comparing ddr2 versus ddr because intel runs it at 2T ? Or is this false information?

Anyways fastest memory around atm :toast: keep em coming boss

la.ultima
01-14-2006, 10:56 AM
The 955X board was a better overclocker with the volt mods, next break down I will mod this mobo.

I was playing with clocks last night and with stock mobo it doesnt want to boot past 5.3Ghz into windows.

I am picking up a Gigabyte G1 board to test as well.

Hi!

Do you think the P5WD2-E, 955XE, Corsair8000UL and Vapo LS is now a bad combi??

Because i´m reading there is maybe a sub-zero problem, or everything is ok??

Best regards and congrats for your work

Hazzan
01-15-2006, 12:05 AM
Perfect !!!:thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup:

FUGGER
01-15-2006, 03:12 AM
Booted into windows at 14x 386FSB w/ 2GB Corsair 8000UL 3-2-2-4 1:1

http://www.xtremesystems.org/forums/attachment.php?attachmentid=42346&stc=1&d=1137323552

Sandra cache & bandwidth (http://www.xtremesystems.org/forums/attachment.php?attachmentid=42352&stc=1&d=1137330812)

Link to AM3 score below.

Update: 392FSB 1:1 3-2-2-4

http://www.xtremesystems.org/forums/attachment.php?attachmentid=42351&stc=1&d=1137330812

Chri$ch
01-17-2006, 09:54 AM
Hi,

my P5WD2-E Premium arrived today, but overclocking is bad!

Max. FSB is 292Mhz x 12! (my P5WD2 Prem. 380Mhz x 12!!!!)

which Bios do you use?

Byron
01-17-2006, 10:02 AM
now that is some SERIOUS bandwidth http://img252.echo.cx/img252/4391/msmiley18xh.gif

Cooper
01-17-2006, 10:27 AM
Serious ?
Fugger why it`s only 5000 MB/s ? IMO pretty low, ain`t it ?
And does Intel benefit from low latency ? Or it`s better to loosen it for more speed ?

Anyway Fugger congrats on achievin so nice clocks with so low latency :up:
Keep it coming :)

FUGGER
01-17-2006, 11:04 AM
Unbuffered score on 975x

955x at 404FSB
http://www.xtremesystems.org/forums/showthread.php?t=68511

I have new memory from Muskin today, running LL 400FSB now with 1GB modules.

Cooper
01-17-2006, 11:54 AM
Unbuffered score on 975x

955x at 404FSB
http://www.xtremesystems.org/forums/showthread.php?t=68511

I have new memory from Muskin today, running LL 400FSB now with 1GB modules.

Now that`s totaly different thing :clap: