8 pipes, all air, 32.5K 3d01marks

[jrw]

Broke my former personal best (oh sweet Dothan) tonight.

An absolutely PERFECT bench-session!!! I learned sooo much :woot:

Opteron 146
DFI NF4 Ultra-D
1GBLE
Powercolor X800GT
TT BT, OCZ 520 ADJ, lots of fans :D
http://www.xtremesystems.org/forums/attachment.php?attachmentid=41893&stc=1&d=1136519156

http://www.xtremesystems.org/forums/attachment.php?attachmentid=41894&stc=1&d=1136519208

Comparo (http://service.futuremark.com/compare?2k1=8853078)

I found that my Opteron has its sweetspot around 1.55vcore and that my rather poor-clocking Powercolor X800GT had a little more in it :D

Mem-clocks could be better, 33K coming up :fact:

[rob[GL]]

Man, I gotta get my hands on one of those Opteron 146's...

[eladlevi]

great score..
what the stock score of the card...?

[Willis]

at 1.6V and zalman this card should do 635 on core :)
in case you want to voltmod it ;)

[Malachia]

this is a challenge man, tomorrow dothan/agp power to beat you, all air stock cooling :D

[neoman]

Wow very nice benching ;) Opterons owns !

[jrw]

this is a challenge man, tomorrow dothan/agp power to beat you, all air stock cooling :D

:D

What card will you be using?

You need 2750+ on the core to beat me if using the same card...

[Malachia]

i use sapphire x800gt AGP, still 8 pipes :)

[perkam]

Stop spanking my X800PRO before I've even begun to use it :(

Perkam

[Shinuza]

Nice doing there :D
For sure you can tweak your timmings up :)

Off topic :

You asked if idle cycle @ 0 increase stabilty, the answer is no, it may decrease it rather.

[M.Beier]

Neat result Stryg - and like that cooling solution :D

A biiit weak timmings, but you can enhance that later on, dont thing your mem has any probs with lower TRC, neither a couple of others..
for 3Dbenchies as well as BW benchies, 16 @ idle cycle limit is perfered against 0, but SPI / PiFast 0 = FTW ;)

[jrw]

i use sapphire x800gt AGP, still 8 pipes :)

Bring it on! :D

We could make a small 8 pipe all air race if more wanna join in :)

Im gunning for happydudes 2nd place on the ORB - 33324.

Btw, which runs are related to what components?

[haPpydUde]

Im 400mhz behind ya man, its a dam shame that my gt died before I even volt modded it. 36k+ would of been nothing. Good luck on beating me man you have more then enough. :toast:

[jrw]

Im 400mhz behind ya man, its a dam shame that my gt died before I even volt modded it. 36k+ would of been nothing. Good luck on beating me man you have more then enough. :toast:

I need to do some modding though. My card is absolutely maxed out in the run above...

[M.Beier]

36k with 3150mhz and 8 pipes?? - Dont think thats possible... - It really requires tweaking skills in order to hit 38k with that speed - with a 16 pipes card..

[haPpydUde]

36k with 3150mhz and 8 pipes?? - Dont think thats possible... -

Why not, 33k at a lowly 2.75ghz with an unmodded card. A high clocked card 36k would be nothing, I am shure If I had voltmodded my card and was able to bench as high as i think I should of been able to. (I was so far from maxed out) 25c max load temp on the card under water. A vmod would of probly gave me 750ish core and a 3+ghz run at 750+ would of easily been 36k. Don't think these cards are that weak just cause there 8pipes.

Keep the scores comin stryg :toast:

[jrw]

http://www.itu.dk/people/jacobwang/hardware/33387.jpg

http://service.futuremark.com/compare?2k1=8861831

:banana:

Im modding the card tomorrow :)