FX-57 old Mach1 r134 & X1800XT 3D Tests :)

[SIOUX]

Hi guys:)


Well.....I got a hold in an old Mach 1 with r134, course i wanted to put it on my X1800XT card, and i´m going to soon:) (gonna mod it with r404 before that)

But today i was bored, and i tryed to put it on my 0528GPMW FX. I was a little surprised og the results.

I was able to reach 3500 1.6v Benchstable:) Idle temps was -9. Full load at +11 :D Mach Display shows -33

Updates soon. Still have a lot left in the X1800, and some in CPU


Gfx on Water:)


http://img245.imageshack.us/img245/6811/3d0lj.jpg


3d01:
http://service.futuremark.com/compare?2k1=8851458


3d03:
http://service.futuremark.com/compare?2k3=4520563

3d05:
http://service.futuremark.com/compare?3dm05=1644728

Aquamark:
(See Screenie)

SPi 1M :
(See Screenie)

[SlackeR]

Very, very nice SIOUX :)
Those machs are actually quite amazing. That is a good clock on an r134-cooler ;)
Or it could be you :p:

[eva2000]

Woah sweet stuff... more catching up for me to do LOL

[marvt74]

Thats a great score and the temps are better than i expected for an old mach 1.

Would love to see that think under LN2 or a cascade though ;)

[GazC]

Going from strength to strength there SIOUX :)

It's interesting to see that the X1800XT only gives any advantage in the nature test in '01, the rest of the marks there are purely from system horsepower.

[mdzcpa]

Nice chip:)

[Ator]

Over 12k :clap: :clap: :clap: . Nice scores, dude. My 1800XT is about to ship from the Egg, and I can't wait to get over 10k with it. :)

[SIOUX]

Going from strength to strength there SIOUX :)

It's interesting to see that the X1800XT only gives any advantage in the nature test in '01, the rest of the marks there are purely from system horsepower.

yes indeed...imagine what this card could do with catalyst 4.12 if that was posible:D



Thanks Guys:toast:

[Plywood99]

Nice 05 score Sioux. This weekend when I have some more time, I'm gonna try some drastic cooling on my system. Got a feeling 12k+ will be no problem.

[G H Z]

imagine what this card could do with catalyst 4.12 if that was posible:D

Try it ;)

[blind_ripper]

very nice clocks on the fx en the gfx SIOUX ;) .

[loc.o]

very nice, next stop will be 46K !!

[nachthymnen]

Congratulations!!!
Impressive scores:)
'01 it's very good.:toast:
In the '03 the GTX rules:
http://service.futuremark.com/compare?2k3=4512852

[SIOUX]

Try it ;)



Its not posible...tryed it already:)

[M.Beier]

hehe, tweaking possible and SIOUX not tryin it? - Just aint gonna happen G H Z :P

Great job SIOUX, can you come online @ MSN later today, Im quite interested in having a talk about GFX with ya :)

[GazC]

Its not posible...tryed it already:)

Is it not possible to alter the device id file like you used to be able to on the early Cat3.x drivers (back when the 3.2 was considered best and it didn't recognise the 9800pro)?

[SIOUX]

Is it not possible to alter the device id file like you used to be able to on the early Cat3.x drivers (back when the 3.2 was considered best and it didn't recognise the 9800pro)?


Its worth a shot for sure. will try that later:)

[GazC]

Its worth a shot for sure. will try that later:)

I'm sure Omegadrive, Killersneak or w1zzard maybe able to help you if none of the legends here can

[SIOUX]

W1zzard say its not posible to do it on the new generation cards:( talked to him on msn.

[gubben]

Very very Nice:toast:
Tanks for your help , i make 11.7 k now with the X1800Xt on air:toast:

[LittleDevil]

Do you have some picture of system... What about temps at windows on full load?

tnx

[SIOUX]

Do you have some picture of system... What about temps at windows on full load?

tnx


I dont own a digicam, but Ã:banana:´m playing with the mach again tomorow or the day after. i will post some temps then:)

[SIOUX]

Very very Nice:toast:
Tanks for your help , i make 11.7 k now with the X1800Xt on air:toast:


You are welcome:toast:

[SIOUX]

A small update:)


http://service.futuremark.com/compare?2k1=8851458




http://img476.imageshack.us/img476/4197/3d6gm.jpg

[eva2000]

nice and that vid mem still has alot of room!

[CrashOv3r1De]

wow keep pushing it

[Drow]

@SIOUX
What's the manufacturer of your card? Sapphire, ATI, Club3d, Connect3D, ...?

[SIOUX]

@SIOUX
What's the manufacturer of your card? Sapphire, ATI, Club3d, Connect3D, ...?


Its a Club-3d :)

[eva2000]

Closing in on you but lacking cpu power heh


HIS X1800XT + Acetal Maze4 Low profile GPU block
@803/945

3dmark05 = 11,750
http://service.futuremark.com/compare?3dm05=1655918

http://www.fileshosts.com/DFI/NF4_SLI_D/results/Opteron170/CCWBE_0546XPMW/Corsair/XMS3500C2/2x512/2_1/1114_3/9x/328-246-2225-7-14-2222_1.65-1.5-1.6-3.23_3120_ds3dds1_8F55/X1800XT_Maze4/3dmark05_803-945_11750_tn.jpg (http://www.fileshosts.com/DFI/NF4_SLI_D/results/Opteron170/CCWBE_0546XPMW/Corsair/XMS3500C2/2x512/2_1/1114_3/9x/328-246-2225-7-14-2222_1.65-1.5-1.6-3.23_3120_ds3dds1_8F55/X1800XT_Maze4/3dmark05_803-945_11750.jpg)
==========

HIS X1800XT + Acetal Maze4 Low profile GPU block
@803/945

3dmark2003 = 22,076
http://service.futuremark.com/compare?2k3=4527030

http://www.fileshosts.com/DFI/NF4_SLI_D/results/Opteron170/CCWBE_0546XPMW/Corsair/XMS3500C2/2x512/2_1/1114_3/10x/LDT3x/166/289-240-2225-7-14-2222_1.62-1.5-1.6_3120_ds3dds1_8F5/X1800XT_Maze4/3dmark2003_803-945_22076_tnn.jpg (http://www.fileshosts.com/DFI/NF4_SLI_D/results/Opteron170/CCWBE_0546XPMW/Corsair/XMS3500C2/2x512/2_1/1114_3/10x/LDT3x/166/289-240-2225-7-14-2222_1.62-1.5-1.6_3120_ds3dds1_8F5/X1800XT_Maze4/3dmark2003_803-945_22076.jpg)

[SIOUX]

Closing in on you but lacking cpu power heh


HIS X1800XT + Acetal Maze4 Low profile GPU block
@803/945

3dmark05 = 11,750
http://service.futuremark.com/compare?3dm05=1655918

http://www.fileshosts.com/DFI/NF4_SLI_D/results/Opteron170/CCWBE_0546XPMW/Corsair/XMS3500C2/2x512/2_1/1114_3/9x/328-246-2225-7-14-2222_1.65-1.5-1.6-3.23_3120_ds3dds1_8F55/X1800XT_Maze4/3dmark05_803-945_11750_tn.jpg (http://www.fileshosts.com/DFI/NF4_SLI_D/results/Opteron170/CCWBE_0546XPMW/Corsair/XMS3500C2/2x512/2_1/1114_3/9x/328-246-2225-7-14-2222_1.65-1.5-1.6-3.23_3120_ds3dds1_8F55/X1800XT_Maze4/3dmark05_803-945_11750.jpg)
==========

HIS X1800XT + Acetal Maze4 Low profile GPU block
@803/945

3dmark2003 = 22,076
http://service.futuremark.com/compare?2k3=4527030

http://www.fileshosts.com/DFI/NF4_SLI_D/results/Opteron170/CCWBE_0546XPMW/Corsair/XMS3500C2/2x512/2_1/1114_3/10x/LDT3x/166/289-240-2225-7-14-2222_1.62-1.5-1.6_3120_ds3dds1_8F5/X1800XT_Maze4/3dmark2003_803-945_22076_tnn.jpg (http://www.fileshosts.com/DFI/NF4_SLI_D/results/Opteron170/CCWBE_0546XPMW/Corsair/XMS3500C2/2x512/2_1/1114_3/10x/LDT3x/166/289-240-2225-7-14-2222_1.62-1.5-1.6_3120_ds3dds1_8F5/X1800XT_Maze4/3dmark2003_803-945_22076.jpg)


nice Eva:) I´m just waiting for some colder temps here. soon it will -10 in night, and then i´m gonna spank the c*** out of my mem:D

[eva2000]

-10C :eek: i wish hehe

why don't you double up on clothing and move your rig outside backyard for a bench or two ? :D

[SIOUX]

-10C :eek: i wish hehe

why don't you double up on clothing and move your rig outside backyard for a bench or two ? :D



I have a VERY big window in my computer room. and the comp is standing right in front of it. its the same as standing outside:D

[eva2000]

I have a VERY big window in my computer room. and the comp is standing right in front of it. its the same as standing outside:D
ah HA that's ya secret :D

I'm waiting for this to come my way http://www.xtremesystems.org/forums/showpost.php?p=1217751&postcount=131 :D

[SIOUX]

ah HA that's ya secret :D

I'm waiting for this to come my way http://www.xtremesystems.org/forums/showpost.php?p=1217751&postcount=131 :D


WOW...thats a beauti for sure:D

[gubben]

Sioux tanks for your help:clap:
I have done some tests with my Sapphire X1800XT OC
First with my old FX55 and standard coling + some EXREME AIR.
http://service.futuremark.com/compare?3dm05=1644125
After that i made some runs with my FX57 and a Mach II on the X1800
i notised some insbility in the card when i put the "hammer on the FX57"
a most take away som gpu speed.
http://service.futuremark.com/compare?3dm05=1649476

[SIOUX]

Sioux tanks for your help:clap:
I have done some tests with my Sapphire X1800XT OC
First with my old FX55 and standard coling + some EXREME AIR.
http://service.futuremark.com/compare?3dm05=1644125
After that i made some runs with my FX57 and a Mach II on the X1800
i notised some insbility in the card when i put the "hammer on the FX57"
a most take away som gpu speed.
http://service.futuremark.com/compare?3dm05=1649476


You are welcome my friend, and nice scores:toast:


I also loose some mhz after i plugged in FX-57 and X1800. i think i lost 30 mhz or so, I blame my PSU

What PSU are you using ??? :)

[gubben]

I use Silverstone 650W, when i run with 2 X7800gtx i used that.
I have test OCZ 520 on the system and Silverstone on the 7800:s
But the best run was with the Silverstone alone.
http://service.futuremark.com/compare?3dm05=1626102

[SIOUX]

I use Silverstone 650W, when i run with 2 X7800gtx i used that.
I have test OCZ 520 on the system and Silverstone on the 7800:s
But the best run was with the Silverstone alone.
http://service.futuremark.com/compare?3dm05=1626102


ok...I use the OCZ 520 as well. my rails seem fine with DMM. but i have 2 friend who also lost some mhz, after putting in the X1800XT. And 1 of them uses a 1000W PSU. its very strange indeed.

[G H Z]

I'm waiting for this to come my way

Bout time ;) :)

[Plywood99]

Hey Sioux and Eva2000, here is a little competition for yah...

http://service.futuremark.com/compare?3dm05=1686680

[IvanAndreevich]

How'd the acetone smell? :theOldPuffingBananaHere:

[Plywood99]

^^
Smelled almost like world record, but not quite...