View Full Version : measure vcore and vdim dfi ultra
mascaras
12-29-2005, 05:03 PM
hi guys , anyone can teel me where to measure the vcore and vdim with multimeter in DFI ULTRA-D ??? tnks.
perry_78
12-29-2005, 05:04 PM
I'll try to find my notes, PM eva2000 or mdczpa. Its a few pins, easy enough, just cant solder them :(
mascaras
12-29-2005, 05:09 PM
i would like to measue cause i set 1.45v and in the bios read 1.43v and in cpu-z , everest or other softwre reads 1.41v , the power suply its ok i already measure with multimeter and +12v its 12.25v and +5v its 5.10v , and now that i bought the multimeter i would like to see the real vcore and vdim since it reads 2 diferent voltags.
derektm
12-29-2005, 05:15 PM
http://img93.imageshack.us/img93/3694/vcorepoint3nw5vo.png
mascaras
12-29-2005, 05:34 PM
thkns derektm , one more question , to measure vcore its only put the red and black wires of multimeter in two of the 3 vcores of the pic or balck wire of multimeter in ground and red wire in one of the 3 vocres to measure vcore and in one of the 3 vgrounds to measure vdim??? ????
put black wire on ground and red wire on any of vcore. :)
mascaras
12-30-2005, 07:48 AM
ok i already measure de vcore now i nedd to measure vdim anyone knows where it is???? thkns
ManagHead
12-30-2005, 07:54 AM
Ahh.. that was interesting stuff. I have had some problems (two dead cpus), now I'm going to measure vcore! Thanks.
RyderOCZ
12-30-2005, 07:55 AM
Vdimm Measure points (and Vcore too): http://xtremesystems.org/forums/showpost.php?p=777631&postcount=10
mascaras
12-30-2005, 08:33 AM
ok , all measures done , so its like this :
i choose 1.50v and the bios reads 1.48v and smart doctor and cpu-z reads 1.46v and the multimeter read 1.50v so the exact vcore its the one we choose in bios.
The vdim i choose 2.60v , the bios reads 2.66v , the smart doctor reads 2.62v and multimeter read 2.66v , so the exact vdim is the one that the bios reads.
I also measure the +12v and +5v , the bios reads +12v= 12.09 , the samrt doctor reads 11.96v and multimeter 12.25
the +5v the bios reads 4.95 , and the multmeter reads 5.09
and thats all , thnks guys.
MaxxxRacer
12-30-2005, 08:34 AM
wow.. im shocked that your values are so close. My vdim and vcore and terribly off from the real thing.