Increasin MCH Chipset voltage to 1.55 on P5WD2? [Archive]

qgshadow

12-19-2005, 08:17 PM

is it dangerous to put 1.55v on that chipset??
now hes set on 1.5v.

i dunno if increassing the voltage will help but sometimes the whole computer freeze for like 1sec... like when burning ripping and gaming at the same time, the whole computer freeze for like 1sec lol...
do some1 know what makes this and if increassing the voltage will help

JoeBar

12-20-2005, 12:59 AM

I don't believe that it'll help but u can try it out.

boostedevo

12-20-2005, 01:42 AM

Sounds more like maybe a proc or mem issue, but I put a 40mm fan on the stock northbridge heatsink and have pretty much been running 1.85V to it for like 8 months...I don't think 1.55V is going to hurt it (or help your problem).

IluvIntel

12-20-2005, 02:04 AM

The system your talking about qgshadow is in your signature ?

I would definately up the voltage a notch on the NB for that from 1.55 to 1.6. and how is the FSB v. ?

qgshadow

12-20-2005, 09:08 AM

The system your talking about qgshadow is in your signature ?

I would definately up the voltage a notch on the NB for that from 1.55 to 1.6. and how is the FSB v. ?

257fsb mch chiset voltage 1,5v

keopscav

12-20-2005, 01:49 PM

1.6v for me, with a 80mm fan, no problem :D

qgshadow

12-20-2005, 06:50 PM

1.6v for me, with a 80mm fan, no problem :D

i dont have a fan directly on it but....
my case is an antec TX1050B so i have 80mm fan on the fannel whos shooting directly on the video card and close to the northbridge heatsink and i have my 114cfm panaflow close the the heatsink

IluvIntel

12-21-2005, 01:51 AM

257fsb mch chiset voltage 1,5v

257fsb does'nt tell anyone the fsb voltage. But now in your signature it says 270fsb. The problem occured at 257fsb ? if so, what is the voltage set to in bios for fsb ? :)

qgshadow

12-21-2005, 09:06 AM

257fsb does'nt tell anyone the fsb voltage. But now in your signature it says 270fsb. The problem occured at 257fsb ? if so, what is the voltage set to in bios for fsb ? :)

i increased all the voltages MCH,ICH,FSB termination. heuh for fsb i dont remember but its in the purple color so its not maxed :)

VictorWang

12-21-2005, 06:16 PM

I've reached 375fsb on P5WD2 Premium with stock NB_HeatSink :D
370fsb pi_1m benchable, 366fsb 24/7 stable

qgshadow

12-21-2005, 06:58 PM

I've reached 375fsb on P5WD2 Premium with stock NB_HeatSink :D
370fsb pi_1m benchable, 366fsb 24/7 stable

noob:D

how come i dont see C1 and lockfree thing in my bios?

VictorWang

12-21-2005, 07:19 PM

i increased all the voltages MCH,ICH,FSB termination. heuh for fsb i dont remember but its in the purple color so its not maxed :)

MCH for FSB/RAM/PCIE
FSB for FSB
ICH no need , auto is okay

for ur refference, my P5WD2 Premium

MCH 1.65
FSB 1.4
FSB=366 stable
PCIE=133
============

MCH 1.65
FSB 1.5
FSB=370 pi_1m
=375 screen shot
PCIE=133
=================

ur CPUCLK must be higher than 3.4ghz(initial clk) or ES cpu , then you can see LockFree.
C1E is for N0 step and the after, or E0 step Retail version P4

keopscav

12-22-2005, 01:55 AM

MCH for FSB/RAM/PCIE
FSB for FSB
ICH no need , auto is okay

for ur refference, my P5WD2 Premium

MCH 1.65
FSB 1.4
FSB=366 stable
PCIE=133
============

MCH 1.65
FSB 1.5
FSB=370 pi_1m
=375 screen shot
PCIE=133
=================

ur CPUCLK must be higher than 3.4ghz(initial clk) or ES cpu , then you can see LockFree.
C1E is for N0 step and the after, or E0 step Retail version P4

PCIE = 133 :eek:

you don't have problem with your graphic card ?

VictorWang

12-22-2005, 03:04 AM

PCIE = 133 :eek:

you don't have problem with your graphic card ?

not any ;)

qgshadow

12-22-2005, 04:19 AM

keopscav

12-22-2005, 05:46 AM

not any ;)

what's your cards ? the PCIE s'overclock with the fsb ? the best value isn't 101 or 100 ?

VictorWang

12-22-2005, 07:29 AM

what's your cards ? the PCIE s'overclock with the fsb ? the best value isn't 101 or 100 ?

my card: Dell 7800gtx 256m , bios moded to 490/1350

I think pcie clk locked well !
133 pcie did about 25 scores then 100 in 3Dmark05 :p:

keopscav

12-22-2005, 07:53 AM

my card: Dell 7800gtx 256m , bios moded to 490/1350

I think pcie clk locked well !
133 pcie did about 25 scores then 100 in 3Dmark05 :p:

ok thanks, I test this night :toast:

you have a better overclocking with this clock ? (graphics card and cpu)

IluvIntel

12-23-2005, 05:42 AM

man im at 270fsb and i dont see lockfree and c1???

You won't see "cpu lockfree" unless you are running a 560, 570 or 660, 670 cpu.
C1 is in "Enhanced C1 control" under Cpu config.
Read the manual that came with the mobo. :rolleyes: It does help sometimes. ;)

qgshadow

12-23-2005, 12:00 PM

You won't see "cpu lockfree" unless you are running a 560, 570 or 660, 670 cpu.
C1 is in "Enhanced C1 control" under Cpu config.
Read the manual that came with the mobo. :rolleyes: It does help sometimes. ;)

before the c1 was in bios but somehow he dissapear