View Full Version : Asus P4P800-VM+CT479+Cel.-M (Dothan) with U-WIRE MOD?!?
hello
can you help me... I plan a Celeron-Mobile(m350) System on the Asus P4p800 - Vm Mainboard... negative aspect is that the vcore is locked on this board...
Can i make a u-wire mod with the adapter on this board?
What VCORE can i have after this mod?
Anybody who had made this?
I must take this board because of mATX...
Can I take every DDR400 RAM to overlock?
With FSB 170 i will be very happy.
Can I change the VCORE in Win. with that tool?
http://www.cpuheat.wz.cz/html/Download.htm
TL1000S
12-19-2005, 05:31 PM
As explained in the Dothan/CT479 "howto" sticky the u-wire mod gives 1.5VCore regardless of MB (as I understand it).
I have the P4P800-VM + Celeron M 360 in one system..
My experience (also with 350 M) is that this chip does not respond to increase of VCOre.. It OC's to max on default VCore.. almost.. :)
My 360M manages 168x14=2352.. the 350M did 166x13.. none of them would boot at VCore > 1.45 (if I remember correctly).
Other members here has reported similar results..
lawrywild
12-19-2005, 05:36 PM
my celeron m 360 got to 185x14 (2.6ghz) on 1.375v...
upping volts only made it worse..
Pongi
12-19-2005, 09:18 PM
my celeron m 360 got to 185x14 (2.6ghz) on 1.375v...
upping volts only made it worse..
Is that a B1 or a C0 stepping? What motherboard were you using?
Can i use simple DDR400 Ram? CL 2.5? And clock to 165FSB?
tozas1979
12-20-2005, 07:57 AM
The better the ram, the better the OC.
lawrywild
12-20-2005, 07:58 AM
http://valid.x86-secret.com/show_oc.php?id=49621
B1 on p4c800-e dlx...
i dont need more vcore with celeron-m?
I bought now TCCD RAM from Corsair.