3.7ghz single stage fx57

[bazx]

well what can i say i am amazed before i modded this vapo max oc was 3.4
and as you can now see it is pulling a 3.7
this is good news for me as i now know i do not have a buggy 57 0530

-68c on the DT200 no load/ -18c in the bios idle/-55/6 load/ 402a /NL11F

chilly 1 evap thanks dude
jan supplied compressor and coil

full vapo camshell mount

http://www.net7.info/1/vapo/10.jpg
http://www.net7.info/1/vapo/3.7.gif

[kcnyc]

Wow! Nice single stage..........

[[XC] moddolicous]

Nice. What gas? R404? IHS on or off the CPU?

[bazx]

Nice. What gas? R404? IHS on or off the CPU?

402a cpu ihs still on

i nearly craped myself when it hit 3.7

[speed bump]

Smoking Baz nice job on that mod this is just about the best single stage I have ever seen

[Cpt Twitchy]

Looking Great there Bazx. What week chip and stepping is taht chip and wahts the max stable speed?

Thanks
Tim

[Sneil]

ive got some r402a im about to use, is that strait r402a or is there some propane in there as well. im suprised that little condensor and desupe can handle that so well. nice temps! and amaizing oc:eek:

[bazx]

Smoking Baz nice job on that mod this is just about the best single stage I have ever seen

thanks dude

@ Twitchy it is a 0530 not had time for pi yet only had an hour with it but a good omen


ive got some r402a im about to use, is that strait r402a or is there some propane in there as well. im suprised that little condensor and desupe can handle that so well. nice temps! and amaizing oc

just 402a
i belive it is just the right componets that have all come together

NL11F/402a/coil/and the chilly1 evap

[vapb400]

Holy crap that is a nice SS and FX! What is it benchable at?

[axion]

God that is a really nice setup hopefully I can put together a phase change system by about mid-next year :>

[vapb400]

What is the 110v/US equivalent of the NL11F

[Gray Mole]

Sweet work Baz :D

It's good to see the UK crew doing phase and doing it well.

But now that you've got in on there, let's see some benches, mate :fact: An fx-57 of that calibre just sitting there is a crime :D

Seriously though, very good results. Shame I'm up here in the chilly North, would be cool to come up there and see 'the lab' :woot:


Gray

[chilly1]

That is the RevE.03 (cust)evap I did a few changes to the evap internally before I sent it out. and next week there is a new one with these changes.........RevE.04 ( had to tweak the thing.. ;) couldn't help it)

[Entsafter]

-55° load!!!
amazing temps :eek:
I love this danfoss nl11f compressors! sweet and powerful :toast:

[Jack]

Basx, what condenser pressure do you have with the r402?

Absolutely nice temps and clocks :toast:

[fatty]

What voltage are you running through the chip???

[bazx]

Basx, what condenser pressure do you have with the r402?

Absolutely nice temps and clocks :toast:

about 12 bar

fatty i did 3 runs @ 3.7 1.55/1.60/1.63 i think the 1.6 was the one that allowed me to get it up on cpuz with out a crash dont forget these are not stable runs
just a test

[bazx]

That is the RevE.03 (cust)evap I did a few changes to the evap internally before I sent it out. and next week there is a new one with these changes.........RevE.04 ( had to tweak the thing.. ;) couldn't help it)


hehe chilly i dont no what you did in that evap but i am glade you did

evap was suppied by chilly compleat with cap and suc tubes

[LittleDevil]

bazx do you have more pictures of vapo?

tnx

[s7e9h3n]

What is the 110v/US equivalent of the NL11F
Considering that ECT uses the NL11F for their 220V Machs, then the 110V equivalent would be the NF9FX (well sorta, it's got a smaller displacement but operates more efficiently)

@bazx: -55C evap load and +6 Core temps??? Sounds like you may have a bad mount with a delta of 49C. This is my FX57 @ -55C Evap (before my autocascade was re-modded):
http://img345.imageshack.us/img345/5492/3863valid9ez.jpg

[fatty]

:( I need to hurry up and build a working cascade

[Cpt Twitchy]

Chilly could you please show or tell us waht makes this evap different? is it actually a physically different design inside?

[bazx]

bazx do you have more pictures of vapo?

tnx

what bit you after?

[epion2985]

Considering that ECT uses the NL11F for their 220V Machs, then the 110V equivalent would be the NF9FX (well sorta, it's got a smaller displacement but operates more efficiently)



Acording to danfoss NF9FX is 220v not 110v.

http://de.refrignet.danfoss.com/TechnicalInfo/Literature/Manuals/06/NF9FX_R134a_220V_50Hz_08-03_Cd43z322.pdf

I am kind of qurious myself that the 110v equivalent is.

[s7e9h3n]

Acording to danfoss NF9FX is 220v not 110v.

http://de.refrignet.danfoss.com/TechnicalInfo/Literature/Manuals/06/NF9FX_R134a_220V_50Hz_08-03_Cd43z322.pdf

I am kind of qurious myself that the 110v equivalent is.
This is my modded mach2 110v ;) -
http://img361.imageshack.us/img361/1680/mod3vs.jpg

[epion2985]

wonder why their spec sheet I linked above says 220v ?

[s7e9h3n]

wonder why their spec sheet I linked above says 220v ?
There may be 2 versions of the compressor :confused:

[LittleDevil]

Any new pictures? What about temp in windows at full load?

LP

[Jort]

This is my modded mach2 110v ;) -
http://img361.imageshack.us/img361/1680/mod3vs.jpg

i always tought that compressor connections must be brazed with silver brazing rods:cool:

[esdee]

well what can i say i am amazed before i modded this vapo max oc was 3.4
and as you can now see it is pulling a 3.7
this is good news for me as i now know i do not have a buggy 57 0530

-68c on the DT200 no load/ -18c in the bios idle/-55/6 load/ 402a /NL11F



-68/-18 in BIOS and -55/6 load is a bit weird.
what vcore are you using?

i got -48/-21 idle and -43/-5 aprox load using a custom single stage with r507.
i could even validate at a bit less than 3900MHz with that SS.
benches were about 3570 for superPI 32M @ 1.65Vcore

if it's not a bad contact maybe a captube length issue

[giorgioprimo]

Really outstanding unit, may you post all the specof the compressor?

Thanks

[LittleDevil]

bazx what about temp in windows idle and full load?

tnx

[LittleDevil]

bazx how big and how long captube are you using?

tnx