OPB completed the self-challenge of BH-5 (512mbx2) doing 283x13 super pi 1m [Archive]

Onepagebook

12-17-2005, 04:41 AM

Finally:D..
Cooling power by Mickymouse 3 inches mousepot.
Not easy though:p:
**BH-5 is what I got from TeamGroup:toast: Thank you for doing your best, General Douglas!!:D
CPU-Z verified:

http://img202.imageshack.us/img202/4025/cpuzv1oq.jpg

shot from digital camera:
big size, sorry:p:

http://img209.imageshack.us/img209/2147/283bh58kc.jpg

**later , I will do TCCD above 300x12 on my no cold bug fx57;)

Lastviking

12-17-2005, 04:47 AM

Finally:D..
Cooling power by Mickymouse 3 inches mousepot.
Not easy though:p:
**BH-5 is what I got from TeamGroup:toast:
CPU-Z verified:

**later , I will do TCCD above 300x12 on my no cold bug fx57;)

I think i need to do something after the work this dont look good ;)

Gratz to nice speed :toast:

funkflix

12-17-2005, 05:01 AM

Nice one! :toast:

kiwi

12-17-2005, 05:04 AM

Omg, so tight subtimings at this speed, great :toast:

mag|c

12-17-2005, 05:21 AM

xtreme result as always opb - fantastic job :clap:

M.Beier

12-17-2005, 05:42 AM

Very nice OPB, damn - thats hot :D

Is readpreamble @ 3.5ns possible at that speed?

[XC] Aerosupra

12-17-2005, 06:00 AM

thats xtreme! :toast:
those are the best 512MB BH sticks Ive ever seen! :slobber:
I feel like a looser with my best SPi 32 at 28min :D

railer

12-17-2005, 06:49 AM

Impressive man:toast: So what temps did the ram's were at? I got to try me those Amd's sys in my chiller -21c on ram and mem controler @load can be nice but im sure it would not top this;)

Supertim0r

12-17-2005, 07:03 AM

Fx-57 0524vpmw ?

NiCKE^

12-17-2005, 07:11 AM

Nice done my friend, very nice.

5days

12-17-2005, 07:30 AM

Why does the thread say BH-5 but your CPUz submission say TCCD DDR600?

mikeguava

12-17-2005, 07:53 AM

Finally:D..

**later , I will do TCCD above 300x12 on my no cold bug fx57;)

I tought your girlfriend was in town???Or did you drop her off on th airport? GJ as always!

[XC] moddolicous

12-17-2005, 08:21 AM

Nice run OPB. Any pics of the set up? BTW, I think the 2x512 record is:
http://xtremesystems.org/forums/showthread.php?t=74067

.sentinel

12-17-2005, 08:42 AM

Why does the thread say BH-5 but your CPUz submission say TCCD DDR600?

Where do you see that?

coop

12-17-2005, 09:42 AM

That is very good. Why is the 13x less cooperative than one above or below, are the Teams avail. in US, and what bios did you use for this? Did you try any others?

Dani

12-17-2005, 09:48 AM

Where do you see that?
Left up in CPU-Z screenshot -->Submitted by...

Cpt Twitchy

12-17-2005, 12:00 PM

Awesome looking results so far with that beastly 3" pot:woot: Now lets see some 14x280 or 15x260 action hehehehe

Tim

Onepagebook

12-17-2005, 04:19 PM

Nice run OPB. Any pics of the set up? BTW, I think the 2x512 record is:
http://xtremesystems.org/forums/showthread.php?t=74067

Thank you guys,
haha, bro, 290mhz is kinda nice, but think about the multiplier;)

Onepagebook

12-17-2005, 04:24 PM

Why does the thread say BH-5 but your CPUz submission say TCCD DDR600?

Cuz I was trying to test my Team TCCD ddr600 and read Ozzimark's pm regarding cold bug program after I done that bh-5 and I forgot I also have cpuz.cvf file I would like to submit to verify just a accidentally made the mistake on my name though, sorry, I will correct it if I can.:p:

Here is the pic I show ozzimark when I just figured out my fx57 without any cold bug even ram:cpu 1:1 to 305htt;)
That's very impressive especially under cpu core temperature@ -40c colder

http://img222.imageshack.us/img222/5816/nocoldbug3qm.jpg

Jort

12-17-2005, 04:33 PM

Very nice kev!!!

s7e9h3n

12-17-2005, 04:36 PM

Cuz I was trying to test my Team TCCD ddr600 and read Ozzimark's pm regarding cold bug program after I done that bh-5 and I forgot I also have cpuz.cvf file I would like to submit to verify just a accidentally made the mistake on my name though, sorry, I will correct it if I can.:p:

Here is the pic I show ozzimark when I just figured out my fx57 without any cold bug even ram:cpu 1:1 to 305htt;)
That's very impressive especially under cpu core temperature@ -40c colder

http://img222.imageshack.us/img222/5816/nocoldbug3qm.jpg
Bleh...@305 1:1, time should be faster than that Kev.....;)
http://img345.imageshack.us/img345/4347/14x2621m2vj.jpg

mrlobber

12-17-2005, 04:40 PM

Keep up the great job, bro :toast:

s7e9h3n

12-17-2005, 05:03 PM

any pictures of the bench setup? containers and so on?

thanks and great results.
As OPB's probably trying to catch up on some sleep, I'll do my best to help him out and post a pic of his setup:
http://img79.imageshack.us/img79/3264/setup8xl.jpg
That's his SS connected. His cascade's to the left and I'm sure his containers are lying around somewhere....

Pyr0

12-17-2005, 05:37 PM

wOw :slobber:

STEvil

12-17-2005, 06:33 PM

same model UPS I use hehe :D

s7e9h3n

12-17-2005, 06:45 PM

same model UPS I use hehe :D
Should have been there before I told him to get that. He was using a Belkin 650VA and was wondering why an alarm kept sounding everytime he loaded his system :D

ozzimark

12-17-2005, 09:56 PM

That's his SS connected. His cascade's to the left and I'm sure his containers are lying around somewhere....
i'm envious ;)

Onepagebook

12-17-2005, 09:57 PM

Bleh...@305 1:1, time should be faster than that Kev.....;)
http://img345.imageshack.us/img345/4347/14x2621m2vj.jpg

dang...you use BH-5 , I merely random run for TCCD 610, 2.5-3-3-5:D no tweaks ..and only short for 0.03s..:slap:

also, that DDR610 is on the Ultra-D;), if you are on ultra-D, I don't think you can beat me:D

Onepagebook

12-17-2005, 10:08 PM

i'm envious ;)

Don't be, cuz you 'll owe me as you said:D

the pic steve show has been outdated since last month my old apt caught fired, now, all my toys looks like this:
BTW, the 3in mousepot is on the desk.;) the real tough unit!!

http://img230.imageshack.us/img230/9854/eniv4tb.jpg

STEvil

12-17-2005, 10:09 PM

Should have been there before I told him to get that. He was using a Belkin 650VA and was wondering why an alarm kept sounding everytime he loaded his system :D

lmao

Took my system (XP-M 2500+ @ 2.5 1.875v, 9700pro), friends system (Winchester 3000+ @ 2550 1.55v), Samsung Syncmaster 2200NF (22" CRT), and a Sun T-Rex (24" widescreen CRT) to make this thing beep at me.. after I plugged in my XP-M 2400+ laptop lol :D

ugp

12-17-2005, 10:28 PM

Great job...

Man is that a mess in that picture LoL

M.Beier

12-18-2005, 03:08 AM

Cascade, mousepot 3", lots of other cool stuff...
OPB what are you up to?? - Making me jalouse :slapass:

Nice stuff man :woot:

dfx

12-18-2005, 04:53 AM

Hey that's awesome!!
Good one :clap:

PoL

12-18-2005, 04:55 AM

if you are on ultra-D, I don't think you can beat me:D

What do you mean with that?

SlackeR

12-18-2005, 05:14 AM

What do you mean with that?

That Stephen can run much tighter timings on his BH on the expert than he would on the Ultra-d ;)

Athens[2004]

12-18-2005, 05:15 AM

Don't be, cuz you 'll owe me as you said:D

the pic steve show has been outdated since last month my old apt caught fired, now, all my toys looks like this:
BTW, the 3in mousepot is on the desk.;) the real tough unit!!

http://img230.imageshack.us/img230/9854/eniv4tb.jpg

Lucky boy :D

Fr3ak

12-18-2005, 06:15 AM

aww nice Kevin.
You have great stuff there ^^

[cTx]Philosophy

12-18-2005, 06:49 AM

OPB always gets all the goodies, im also envious...

PoL

12-18-2005, 08:05 AM

That Stephen can run much tighter timings on his BH on the expert than he would on the Ultra-d ;)

And why? I mean... is this on all Experts?
Kind of weird though... I've tried different Experts and never noticed that.

ozzimark

12-18-2005, 08:49 AM

Don't be, cuz you 'll owe me as you said:D
true enough :D:D
also, is that a situations chair? i have one that looks realllllly similar :banana:

PoL, the expert's layout was tweaked a bit to allow for tighter timings at higher mhz

^don.k's^

12-18-2005, 09:05 AM

Nice ram Kev, and nice cold bug less FX... :p: :toast:

s7e9h3n

12-18-2005, 09:12 AM

PoL, the expert's layout was tweaked a bit to allow for tighter timings at higher mhz
True....BUT.....have you seen the layout on the Rev. AD0 Ultra/Sli-D? ;)

M.Beier

12-18-2005, 09:38 AM

That Stephen can run much tighter timings on his BH on the expert than he would on the Ultra-d ;)

Sounds strange, I use Ultra-D
2x 512mb G.skill GH

274mhz 1.5-2-2-5 7-12 tight all the way except trtw = 2 (it needs to be for high frequency...) - and readpreamble @ 3.5ns :)

s7e9h3n

12-18-2005, 09:44 AM

Sounds strange, I use Ultra-D
2x 512mb G.skill GH

274mhz 1.5-2-2-5 7-12 tight all the way except trtw = 2 (it needs to be for high frequency...) - and readpreamble @ 3.5ns :)
This is tight for an ultra-d (in fact, this is probably as tight as BH-5 can run on the board). You do know that cl1.5 on the Ultra-d is SLOWER than cl2.0, right? ;)
http://img437.imageshack.us/img437/6585/11x2741m0nc.jpg

M.Beier

12-18-2005, 09:52 AM

This is tight for an ultra-d (in fact, this is probably as tight as BH-5 can run on the board). You do know that cl1.5 on the Ultra-d is SLOWER than cl2.0, right? ;)
http://img437.imageshack.us/img437/6585/11x2741m0nc.jpg

Well, i've tested cas 2 and 1.5, about the same performance, but... I actually gained quiet a bit :) - And since cas 1.5 doesnt excists, I wonder why... - But it was like 2ns @ everest, but 0MB/s @ Sis, in PiFast / SuperPI it gives a desent boost :)
Tras = 0 is a major :nono: on my setup, it gives mega negative effect @ performance, we're talking 0.2-0.3 sec @ 1M
TRRD, never tryed less than 2, dont think it'll perform better :)

PoL

12-18-2005, 10:46 AM

PoL, the expert's layout was tweaked a bit to allow for tighter timings at higher mhz

Thanks man. :)

krampak

12-18-2005, 10:59 AM

This is the tighest timings I did on a DFI SLI-D and 2x512MB Mushkin level II:

http://img491.imageshack.us/img491/1285/2761tmaxagressive7ie.th.jpg (http://img491.imageshack.us/my.php?image=2761tmaxagressive7ie.jpg)

(maybe I didn't try with a lower read preamble and asynx latency).

Haven't tryied yet on the Expert and wil not do it.. i've just sold that mushkin... (4x512 wasn't running fine on my Expert, ordered some Gskill).

ozzimark

12-18-2005, 11:38 AM

True....BUT.....have you seen the layout on the Rev. AD0 Ultra/Sli-D? ;)
this i have not. it got tweaked from the A.C0 i have? :toast:

s7e9h3n

12-18-2005, 11:52 AM

this i have not. it got tweaked from the A.C0 i have? :toast:
Bingo....now you know why OPB loves his Ultra-d again ;)

s7e9h3n

12-18-2005, 11:53 AM

s7e9h3n

12-18-2005, 11:54 AM

Well, i've tested cas 2 and 1.5, about the same performance, but... I actually gained quiet a bit :) - And since cas 1.5 doesnt excists, I wonder why... - But it was like 2ns @ everest, but 0MB/s @ Sis, in PiFast / SuperPI it gives a desent boost :)
Tras = 0 is a major :nono: on my setup, it gives mega negative effect @ performance, we're talking 0.2-0.3 sec @ 1M
TRRD, never tryed less than 2, dont think it'll perform better :)
Don't look @ the settings as individuals. Try my timings as a group and then see if your theory hold true ;)

M.Beier

12-18-2005, 03:44 PM

Don't look @ the settings as individuals. Try my timings as a group and then see if your theory hold true ;)
Oki, I'll try that then, only thing I wont do is ras to cas = 1 :P - Tryed declocking in order to do that, but its just not possible :rolleyes:
Going 2 bed now, was outside tryin' to reach 40k @ 01SE with a 3700+, x850XT, no vmods... - But sadly, the liquid froze on the heatcore and the temp @ GPU went from 1 deg C to 20 deg C, and 1M spi, no matter vcore / speed caused reboot... (was -6 outside, but I got some neat gear to make water reach amb :P)

metro.cl

12-18-2005, 04:20 PM

are you gonna try ln2 on that non coldbug fx-57??

Cpt Twitchy

12-18-2005, 05:27 PM

Heya Predator hows it going?

@ metro my guess is that he will not be using ln2 on this chip. Just a educated guess as he has no dewar.

Onepagebook

12-18-2005, 07:00 PM

These are the best UTT-BH performance ever ,also from the best master in hardware ever , :worship: OPB

saludos

I might try to go 12x300.. or 11x300 under PCICE cascade.:eek: :p: :toast:

dinos22

12-18-2005, 07:27 PM

nice UTT Kev..........very nice

any decent 32M times

STEvil

12-18-2005, 07:52 PM

I might try to go 12x300.. or 11x300 under PCICE cascade.:eek: :p: :toast:

cool the mem to around 0c

Onepagebook

12-18-2005, 08:06 PM

As I know, Team has just got a excellent batch of BH-5 die utt, the best one can easily does 3.0v DDR500.. I am like ....:eek: :slobber:

Cpt Twitchy

12-18-2005, 09:16 PM

Taht is just insane Kev. I can't wait till I gert the money to play with some A64 power. Working on a mobo deal soon then awaiting money for cou hehe.

Tim

Zeus

12-19-2005, 02:42 AM

How about ~310x12 1:1 @ 2,5-3-3-x for WR 32M run?

ozzimark

12-19-2005, 03:30 PM

As I know, Team has just got a excellent batch of BH-5 die utt, the best one can easily does 3.0v DDR500.. I am like ....:eek: :slobber:
hehe, and we all know you would love to have some of that. 250mhz with only 3v is nuts.. that should be good to what, ~280-290mhz at higher vdimm?

Lastviking

12-19-2005, 11:17 PM

hehe, and we all know you would love to have some of that. 250mhz with only 3v is nuts.. that should be good to what, ~280-290mhz at higher vdimm?

One thing i have learn is that low vdimm and high mhz dont always mean they clock highest with high vdimm and good cooling, but its very nice sticks OPB have found.

Onepagebook

12-20-2005, 01:37 AM

One thing i have learn is that low vdimm and high mhz dont always mean they clock highest with high vdimm and good cooling, but its very nice sticks OPB have found.

Exactly, that all depends on how your memory controller can hold that high fsb on the high voltage.;), we will know on the Friday;):slobber:

k|ngp|n

12-20-2005, 09:17 AM

Killer mem clocks as usual OPB :toast:

ZeroX

12-20-2005, 03:14 PM

These are the results that i have at 3.05Ghz.. i think they are a bit worse than urs s7e9h3n (better time, but more mhz..), oh well, and kamprak too. Any suggestions?

http://img104.imageshack.us/img104/5255/xsorz9yq.th.jpg (http://img104.imageshack.us/my.php?image=xsorz9yq.jpg)

Impressive results OPB, waiting for more :toast:

s7e9h3n

12-20-2005, 07:44 PM