HELP: BIOS voltages and temps screwed up!

[FlyBoyGeo]

:mad:

All of a sudden, my temps and voltages displayed in BIOS as well as with MBM are not correct. They are showing high and improper numbers. Look at the picture below, no matter what vcore, vdimm, or other voltage I set in BIOS this is all it shows?

I have reset CMOS and let battery out for about an hour, tried reflashing bios, but nothing worked, any suggestions???

http://img479.imageshack.us/img479/9325/whatsupwiththis28qf.th.jpg (http://img479.imageshack.us/my.php?image=whatsupwiththis28qf.jpg)

Thanks.

[THunDA]

If it shows these same wacked out readings in bios then I'd say its the board..

Have you checked the voltages with a dmm ?

[FlyBoyGeo]

If it shows these same wacked out readings in bios then I'd say its the board..

Have you checked the voltages with a dmm ?

Voltmeter is showing all the 3.3, 5, and 12v rails to be perfect.

I just powered down again, pulled all power cables from mb and reset cmos after 15 mins with no power. Same readings.

Heres a new pic from BIOS:
http://img462.imageshack.us/img462/4336/memreadings2au.th.jpg (http://img462.imageshack.us/my.php?image=memreadings2au.jpg)

Anything else I can try??

[FlyBoyGeo]

anyone

[THunDA]

If they are fine with dmm and are screwed up in bios AND windows.. I think its the board.. but see what some others say..

GL

[FlyBoyGeo]

Holy crap, I just noticed also that none of my fans connected to my mb are spinning when it boots into windows. I have 1 case fan and the nforce4 chipset fan......wtf. The spin up initially when it powers up and posts?

Hmmmmmmm...seeming more like the mb.

Ideas???