Trying to kill something but it dont work :/ 294mhz old bh5,3.38ghz(all air)

[Lastviking]

Damn , its really hard to kill something this days :p:

http://files.upl.silentwhisper.net/upload7/294mhz2x256mb.JPG

Only 3.8v i have still 0.2v more to use :p: and to hot outside

http://files.upl.silentwhisper.net/upload2/3383mhz.JPG

Cooled by Big typhoon 1.67v, hard to go over 3.4ghz but maybe when the temps drop more :rolleyes:

[Backbone]

Awsome !!!
294 Benchable.

[mrlobber]

Lastviking, I remember your insane nF2 BH-5 scores on air, finally you're back with the same on nF4 :D :slobber:

[[XC] DragonOrta]

3.38ghz on air? :banana::banana::banana::banana:, that is some crazy stuff. :slobber:

[Zac89]

:woot: :woot: :woot:

Great!

[dogsx2]

Damn , its really hard to kill something this days :p:

Only 3.8v i have still 0.2v more to use :p: and to hot outside


Cooled by Big typhoon 1.67v, hard to go over 3.4ghz but maybe when the temps drop more :rolleyes:

If you get 005c on pwmic and it's too hot outside, wow. :D

[Mathias-K]

I like your style, Lastviking!

When everybody was about to forget about you, in comes some really sleek results :up:

[dinos22]

nice one

what are we talking here -10/15 outside hehehehehe...........

if that a world record benchable time?!? it sure look like it...........put 4v into them you wimp j/k heheh

[[XC] moddolicous]

I cant see the SPI, what was it? Nice run LastViking. 294 benchable is insane.

[Lastviking]

nice one

what are we talking here -10/15 outside hehehehehe...........

if that a world record benchable time?!? it sure look like it...........put 4v into them you wimp j/k heheh

I think OPB got the WR and its around 296mhz with 4.0v, the temp outside was around -4. The temp will drop to around -24 here soon. The sticks dont like more than 3.83 yet, but after some burning 24/7 with 3.7v i hope they will like it + colder temp outside.

They SPI time was not soo good(sry about the mistake with the image), i got one screen that shows the time @ 293mhz and one on 295mhz ;) "the image with 295 got some bugs, thats why i didnt show it"

293mhz = SPI 28.250

If anyone want to see the 293mhz+295mhz image i will post them later.

[EnJoY]

It's the jedec reference pcb that doesn't like those higher volts I bet. Jedec is usually only good to around 3.6-3.7, after that you need a brainpower.

Nice results btw, however I think OPB's record is with 2x512MB sticks.

[dinos22]

I think OPB got the WR and its around 296mhz with 4.0v, the temp outside was around -4. The temp will drop to around -24 here soon. The sticks dont like more than 3.83 yet, but after some burning 24/7 with 3.7v i hope they will like it + colder temp outside.

They SPI time was not soo good(sry about the mistake with the image), i got one screen that shows the time @ 293mhz and one on 295mhz ;) "the image with 295 got some bugs, thats why i didnt show it"

293mhz = SPI 28.250
high voltage burnin should help as long as it doesn't kill them :D

296MHz is not that far :toast:

[afireinside]

:toast:
lastviking I'm willing to bet you will be the first to break the 300mhz 2-2-2-5 barrier if the ram goes over 3.8v :D

[T_M]

It's the jedec reference pcb that doesn't like those higher volts I bet. Jedec is usually only good to around 3.6-3.7, after that you need a brainpower.

That would explain why these 512 3500C2's i just got dont like anything more than 3.72V actual :(

Also, just wondering what the relevance of the CPU-Z screeny is, considering its got nothing to do with the RAM that this thread is about (1x512), and is only a suicide shot (at a speed that many people can suicide).

Hm, i might have to give trc 9 a go when i get home on my 2x 256's :D

[eva2000]

well i have 2x 256MB XMS3500C2v1.1 and KHX3200K2/512 BH-5 non-BP that handle 3.8+ vdimm fine for 280+ mhz 2-2-2-5 :)

[EnJoY]

well i have 2x 256MB XMS3500C2v1.1 and KHX3200K2/512 BH-5 non-BP that handle 3.8+ vdimm fine for 280+ mhz 2-2-2-5 :)

From what I understand actually, some of the KHX BH5, like the later 3200 and the 3500 speeds used a "tweaked" JEDEC reference pcb. Corsair used the same I believe for their PC3500C2 modules with BH5.

[Lastviking]

It's the jedec reference pcb that doesn't like those higher volts I bet. Jedec is usually only good to around 3.6-3.7, after that you need a brainpower.

Nice results btw, however I think OPB's record is with 2x512MB sticks.


Naa OPB is with 2x256

http://www.xtremesystems.org/forums/showthread.php?t=56674

DesertShooter is not fairaway from him to

http://www.xtremesystems.org/forums/showthread.php?t=80556&page=2

The 2x512 record is 289mhz

http://xtremesystems.org/forums/showthread.php?t=74067


The 295mhz screen

http://files.upl.silentwhisper.net/upload5/295mhz2x256.JPG

[Fr3ak]

Very nice clocks so far :D
Looks like its time for a new sig soon, Lastviking ;)

[dinos22]

Looks like its time for a new sig soon, Lastviking ;)ROFL

[DStealth]

Naa OPB is with 2x256

http://www.xtremesystems.org/forums/showthread.php?t=56674

DesertShooter is not fairaway from him to

http://www.xtremesystems.org/forums/showthread.php?t=80556&page=2

The 2x512 record is 289mhz

http://xtremesystems.org/forums/showthread.php?t=74067


The 295mhz screen

http://files.upl.silentwhisper.net/upload5/295mhz2x256.JPG

What's wrong with your SuperPI score?It so slow with same CPU speed and 3-4-3-5@268mhz ram I make better times without opimizations.
And BTW good clocks:)

[funkflix]

Good job! :toast:

[Lastviking]

What's wrong with your SuperPI score?It so slow with same CPU speed and 3-4-3-5@268mhz ram I make better times without opimizations.
And BTW good clocks:)

Yeah i see that to, i will try to found the problem. Its weard. Hmm i got a packet today with a new old bh5 stick :p:

[5days]

What voltage did you require for your CPU to get 3.38GHz? 1.70V?

[Lastviking]

What voltage did you require for your CPU to get 3.38GHz? 1.70V?

Around 1.65-1.67v

[s7e9h3n]

LOL, all this talk of old 256 sticks got me curious about my pair of Kingstons sitting in the drawer. Threw them on this Ultra-D along with my FX55 (the cpu in my sig) and booted @ this on air:
http://img517.imageshack.us/img517/2171/11x280bh51wg.jpg
Not bad, could be better but I'm browsing @ this speed right now. ~1.6Vcore ~3.65Vdd...

[DesertShooter]

This is my kingston BH-5 ;) @ 3,8v

http://www.utforce.info/294.4.jpg

[althes]

keep it going

[psiko]

max memtest overclock?

[SoF]

that's really awesome aircooling.
the ram results are outstanding and I really think of getting bh5 again just for fun. the amazing bh5 results won't stop even these days.
I'm still crying about my khx bh5 I sold some time before :(

[sang]

Damn , its really hard to kill something this days :p:

http://files.upl.silentwhisper.net/upload7/294mhz2x256mb.JPG

Only 3.8v i have still 0.2v more to use :p: and to hot outside

http://files.upl.silentwhisper.net/upload2/3383mhz.JPG

Cooled by Big typhoon 1.67v, hard to go over 3.4ghz but maybe when the temps drop more :rolleyes:

hehe
for the infamous thread title,you deserve some punishment from the upper side!
nice clocks,btw :)

[olDirdey]

Nearly 3.4G on Air is really impressive, as well as your 294 2-2-2-5 :D

Good job :clap:

[[XC] moddolicous]

Here, this thread might be a little help to you last viking:
http://www.xtremesystems.org/forums/showthread.php?t=56549&highlight=project+290
Extreme mem cooling.