page fault in non paged area ERROR

[Dissolved]

i keep getting this BSOD error when my ram is 191 or higher fsb.

i get it about 10seconds after running 3dmark.

Does anyone have any idea's to get this to stop?


*My vmem is 2.8v
*MY PageFile is on my ide drive. (scsi drive is my os)
*cpu voltage was rasied to 1.92v
*Tryed defragging before.

[shray]

me too dood.. in winxp after ocing higher than 145 it gives me this... but on 145 its dead stable... think its ram... But i gotta unlock..

[GVCryan]

That error is usually either mem related or psu related.

I have gotten it with both being culprits.

Once I was testing a buddies system with one of my sticks of Samsung. We got it at 138fsb (my stick is good for 182). Turns out he had a 150watt psu in his crappy system.

I also got it by running a stick of simpletech 2100 at over 170 with my ttgi.

Just trying to help.

[Shuki]

relax your mem timings. 2.5 3-6-3-2 see if that helps.

[Dissolved]

hm. well i was able to do 195x9.5 1852mhz so im thinking 1910 is my max cpu clock. anything higher at any fsb seems to get errors.

So i guess im only able to fine tune now.. might have to get a better Cpu :-/

[SektorX]

I used to get this bluescreen when overclocking om my board. Hell, I even got it just booting defaults. the other day I was mesuring voltages on the board and it looked like the rams were only getting 2.46V (I can't change voltages in the bios). So I rigged my powersupply somewhat and my ramvoltage is up at 2.51. haven't seen those page fault bsod's anymore, so try changing ram setting somewhat. You'll be surprised