WR P4 630 - Tyrou's cascade powered

[Tyrou]

WR P4 630

http://valid.x86-secret.com/show_oc.php?id=54229

400.4*15 = 6006.19Mhz
Vcore = 1.96V
+100% OC !


----

Original post :

WR P4 630 @ 5931.95Mhz

5931.95Mhz : 395.4*15 : http://valid.x86-secret.com/show_oc?id=53993

P5WD2 full modded, bios 0606
P4 630 SL7Z9
2*512Mo Transcend DDR2
7800GTX
Antec 550W modded

This was achieved using X³, my new cascade, not finished yet (waiting for a better gas for the third stage), evap temp remains around -100C and a thermocouple stuck to the side of the IHS shows -80C

The cascade thread on XS : http://www.xtremesystems.org/forums/showthread.php?t=74204
Original thread on cooling-masters.com (french, but with pics :D) : http://www.cooling-masters.com/forum/index.php?showtopic=2950&st=0

This cpu did 4720Mhz box aircooled and 5616Mhz on a single stage :
air : http://www.xtremesystems.org/forums/showthread.php?t=64248&highlight=630
ss : http://www.xtremesystems.org/forums/showthread.php?t=79088&highlight=630

I hope it will keep going up when I'll have a colder cascade :D

[gloatlizard]

that's the way to go steven;)

[Tyrou]

thanks mate :)

I hope to find R14 in the next future, that should provide me with ~20C lower temps, I think it should be way enough to break the 6Ghz barrier :)

[NickS]

nice job :)

[Shinuza]

French force once and again. :D
Nice job Tyrou

[boblemagnifique]

Good job my friend ;)

[Tyrou]

thx friends :)

I'll be back with a good third stage gas, aiming for a 100% OC :D

[Mathias-K]

Nice going :)

[Grave]

Wow great job man. :clap:

[The Byter]

great job ! :toast:

me and Tycoon tried some ln2 on his 630... and it acts like a cold bug or somthing, when it went too cold we got no post and no nothing.

any idea ?

u must go for 100% ! its a 3 stager ?

[Waus-mod]

Great job.. with new gasses the magic 6 will come out :D

[Learn]

Nice clock Tyrou :toast:

[Tyrou]

:toast:

Byter : I experienced the same thing, no boot when too cold, they're is something like a coldbug, but I saw it on both 630 and 670, I think that's a motherboard issue, it appears when booting for the first time below -85C for me, but doesn't show up when rebooting... that's a bit weird :D

I'm trying to find some methane to pour in my third stage's ethylen, I'm sure it will lower the evap temp by at least 15C, that would be more than I need for the magic 6 :D

[Tyrou]

7800GTX 512MB was shipped today, as soon as I get it, I stick it to my second evap :D

[Tycoon]

Great job my friend :clap:
like the byter said we tried LN2 to close that 100%
but no success :( (that damn cold bug) i will try some dry ice (it's hotter :) )
mybe it will get me some where , i did 5600 with my singel stage http://valid.x86-secret.com/show_oc?id=53537
and it look's like my cpu act like your's
any way i'm happy that you past the 5900 and got u'r WR back, you deserves it
keep it up :toast:
btw what is ur best time in super pi with that cpu?

[Tyrou]

thanks tycoon :toast:
let's keep up with the WR fight, you deserve better than 5600Mhz :)

For now I didn't run any superpi on it, but at 5380, my 670 did 24.4s on exactly the same rig (just exchanged the cpus), I hope to bench over 5500, so I think that with an optimised OS it should reach the 23.xx :)

[ViBe]

:clap: but not enough :D

[nhenhophach]

:clap: :clap: :clap: :clap: :clap: :clap:

[Tyrou]

thanks :)

... but I turned the cascade back on this morning (GMT+1), and managed to grab a few more Mhz :D

WR P4 630

http://valid.x86-secret.com/show_oc?id=54159

424.99*14 = 5949.84Mhz
Vcore = 1.91V

[Tyrou]

Now, i'm only 25Mhz away from my target: 6G, fear the cascade power ! :D

WR P4 630

http://valid.x86-secret.com/show_oc?id=54162

398.37*15 = 5975.6Mhz
Vcore = 1.92V

[Tom Holck]

thanks tycoon :toast:
let's keep up with the WR fight, you deserve better than 5600Mhz :)

For now I didn't run any superpi on it, but at 5380, my 670 did 24.4s on exactly the same rig (just exchanged the cpus), I hope to bench over 5500, so I think that with an optimised OS it should reach the 23.xx :)

You can go 22 sek at 5500 M8 ;)
But you have do do better timings. 4-4-4-4 is not fast :(

sub 22 at 56xx Ghz
20 sek at 6000
19 sek at 6400
18 sek at 6800 (64 bit OS)
17 sek at 7200 (64 bit OS) (7210 is 17.98 sek)
and 16 sek is around 76xx (I think)
;)

all fastest Ram timings, and moderat tweak at OS.

[Tyrou]

Thanks for your help Tom :toast:

unfortunately, I still don't have 5400UL sticks, the best I can get from those ones should be 4.3.3.4 at 400Mhz

I think i'll go for a windows 2k3 64bits for Superpi, do you think that's a good choice ?

I'll also try to find some better sticks, running 3.2.2.4 would be a huge improvement for me :)

[Tom Holck]

Thanks for your help Tom :toast:

unfortunately, I still don't have 5400UL sticks, the best I can get from those ones should be 4.3.3.4 at 400Mhz

I think i'll go for a windows 2k3 64bits for Superpi, do you think that's a good choice ?

I'll also try to find some better sticks, running 3.2.2.4 would be a huge improvement for me :)

Yes try 2k03 64 bit, it work for me, on AMD-FX I have noticed more heat, and lover max oc than on 32 bit. With Intel it's the same Max-OC in 32/64 bit. Then 64 bit is faster, specialy im 8M and 32M
-And as you say, 5400UL is a must

[Tycoon]

5400UL is a must
copy that ;)

[Tyrou]

I'll go for 5400Ul so :D

now, the target is 8Mhz away :

WR P4 630

http://valid.x86-secret.com/show_oc?id=54176

399.48*15 = 5992.22Mhz

[K404]

Keep going!!!!! You must be going mad with anticipation! :D:D

Kenny

[Tyrou]

I'm already nuts :D

I predict the 6G will fall tonight :)

[Shinuza]

Go on bro :D

[skirms_fr]

good luck for the 6g

always not a frenchi thread :D

[boblemagnifique]

100% only :o

[Tyrou]

Got It !! :slobber:

WR P4 630

http://valid.x86-secret.com/show_oc.php?id=54229

400.4*15 = 6006.19Mhz
Vcore = 1.96V
+100% OC !

[DZ1234]

Insane clocks!!
Congrats :toast:

How about some spi runs? ;)

[Tyrou]

superpi will come tomorrow or later, I have to set up a clean OS (2K3, 64bits, as Tom Holck advised), I'll try to pass 1M over 5600Mhz :)

[Tycoon]

Congratulations! Well done!
the magic 6 and 100% is Ur's
:clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap:

[Tyrou]

thanks tycoon :toast:

Tonight, it's french champagne with my pizza, I have to celebrate the 6G :D

this cpu is insane, it always wants to clock higher :D

[K404]

:D:D I`ll be even more impressed once you get the bench results!

Very nice!

Kenny

[cold_ice]

Very good work. This CPU is awesome!

[Tyrou]

thx guys :)

I'll do my best for the benchies, I hope to run 3DMark around 5.3Ghz, that would be quite fun (I'm expecting a GTX512 in the next few days), and maybe 22.xx in SPi 1M

I hope the 670 will start loving extreme coldness, I can get 5070Mhz aircooled with it, but never been higher than 5880, even with the cascade :(

[M.Beier]

thx guys :)

I'll do my best for the benchies, I hope to run 3DMark around 5.3Ghz, that would be quite fun (I'm expecting a GTX512 in the next few days), and maybe 22.xx in SPi 1M

I hope the 670 will start loving extreme coldness, I can get 5070Mhz aircooled with it, but never been higher than 5880, even with the cascade :(

5.3 ghz and 22.xx, hate to break your dreamz, but I have a hard time beliveing that... :)

But very nice clock man :D - Go for the PiFast, SuperPI and AM3

[Tyrou]

is it possible for a moderator to edit the title to "WR P4 630 @ 6006Mhz by Tyrou" ?

Thanks

[M.Beier]

is it possible for a moderator to edit the title to "WR P4 630 @ 6006Mhz by Tyrou" ?

Thanks

Select your first post "edit" and change title, you dont need a mod to do that.. :)

[Mathias-K]

Congratulations!

We've been seing semi-world class results from you for quite some time, so this major WR is well deserved :)

[Shinuza]

Select your first post "edit" and change title, you dont need a mod to do that.. :)
I think he has tried already. I had the same problem myself once.

[Tyrou]

thansk mathias

Yep, I can edit the title, but actually, it stays the same, whatever I write :(

[gonnakillu]

Nice job man
:toast:

Try some 3Ds

[Tyrou]

I'm waiting for my new GPU, should be there on Monday

as soon as it comes, I vmod it, remove the fan and stick the cascade, then we'll play 3DMark :d

[The Byter]

100% respecta !

[Tyrou]

thanks Byter :)

I'll try to find some methane tomorrow, I hope my plan will work :D

[Tyrou]

I'm back in business :D

I severely modded my cascade's third stage, and had some hours to spare playing with my 630 :

WR P4 630

407.02*15 = 6105.36Mhz
Vcore = 1.968V

http://valid.x86-secret.com/show_oc?id=55059

http://img210.imageshack.us/img210/6067/cpu61057nt.png


---

SuperPi 1M :

http://img210.imageshack.us/img210/9202/228909ee.png

[Shinuza]

Huge :slobber:

Ask a moderator for editing the title :D

[ViBe]

:slobber: great oc guy

[Tyrou]

already added to www.overclock-db.com ;)

[ViBe]

already added to www.overclock-db.com ;)

Overclock-DB? :D

[olfen]

what temp on the casacade?

[Tyrou]

around -100C, my thermocouple has turned nuts this morning, it shows anything but the truth :D

[Mathias-K]

Nice! That'll be quite hard to beat.

[Tyrou]

I'll do my best to make it even harder to beat :D

target : 6.2Ghz :D

[althes]

congrats my friend

[Tyrou]

thanks :toast:

[Tyrou]

Don't stop 'til you get enough... :banana:

WR P4 630

http://valid.x86-secret.com/show_oc?id=55244

413.02 *15 = 6195.26Mhz
Vcore : 1.98V

:D

[gonnakillu]

damn...

congrats on the 106% :D

P.S.: Ur sig should be edited ;), or r u still testing?

[Tyrou]

I'm still testing, now both my 630 and my 670 are > 6Ghz :d

[wampir]

congratz!!!
that's the really good clock. Coud You try spi 16M as high as You can and remember about OS tweaks :)

[Cornelious0_0]

I'm still testing, now both my 630 and my 670 are > 6Ghz :d

Very nice bro...100% OC's are nice enough to start with...but on a chip like the 630 it's just nuts. :woot:

[speed bump]

Nice job that cascade is doing awesome for you.

[Tyrou]

thanks a lot guys (and Chrlie too for having the title edited ;) )

I'm now hunting the 22s SPi 1M (1.04 patch), for now, I'm stuck at 22.672s, but I just installed win 2K3, I hope it will help me to reach my aim.

next will come the 3DMark tests, i've received a brand new GTX512OC from BFG :slobber:

[jan]

very nice Tyrou :)

~6200MHz on a 630 is just amazing

[[XC] moddolicous]

Insane clocks there Tyrou. Now, give the chip 2.1v and get it up to 6.5ghz. Cant wait for 3dmark results.

[Cornelious0_0]

Insane clocks there Tyrou. Now, give the chip 2.1v and get it up to 6.5ghz. Cant wait for 3dmark results.

Nor can I (wait for results)...but if only OC'ing was always that simple and straight-forward. :D

[Tyrou]

I'm back, been busy benching for days :D

The chip is 3DMark stable up to 5600Mhz for now. (400*14 rocks !)

Results are the following (and will change in the next few days) :

3DMark 05 : 11364 ( http://service.futuremark.com/compare?3dm05=1552074)
3DMark 03 : 25325 ( http://service.futuremark.com/compare?2k3=4468238 )
3DMark 01 : 39223 ( http://service.futuremark.com/compare?2k1=8823962 )

Superpi 1M is OK up to ~5700-5800Mhz, which gives me a 22.672s score.

There's still a lot of work to do, I now aim for sub-22s in SPi1M and 40K in 3D01 :)

[Cornelious0_0]

I'm back, been busy benching for days :D

The chip is 3DMark stable up to 5600Mhz for now. (400*14 rocks !)

Results are the following (and will change in the next few days) :

3DMark 05 : 11364 ( http://service.futuremark.com/compare?3dm05=1552074)
3DMark 03 : 25325 ( http://service.futuremark.com/compare?2k3=4468238 )
3DMark 01 : 39223 ( http://service.futuremark.com/compare?2k1=8823962 )

Superpi 1M is OK up to ~5700-5800Mhz, which gives me a 22.672s score.

There's still a lot of work to do, I now aim for sub-22s in SPi1M and 40K in 3D01 :)

Holy $hit man...that's ridiculous...keep going by all means. Myself and the rest of us are already more than astonished...but going for 40k and esSPECIALLY that sub-22s SuperPi is more then a noteworthy task.

I'm keeping my eye on this more then ever, congrat's once more though, you deserve it.