What’s the PCI&AGP Bus on an Aopen AX6BC(440BX) with a Celeron 566(8.5x66)@8.5x115

[Nikita]

I’ve got an Aopen AX6BC (440BX) M/B with a Celeron 566(8.5x66)@ 8.5x115 and I need to know what is the PCI&AGP Bus @ that clock speed??

Thanks.

[PiLsY]

PCI will be 38mhz and the AGP 76mhz.

PiLsY.

[Nikita]

Originally posted by PiLsY
PCI will be 38mhz and the AGP 76mhz.

PiLsY.


Can u plz explain to me y 38/76 plz!!

[Tweaked!]

Pci bus speed is currently running at 38mhz, factory specs are 33. The agp is running at 76mhz, factory specs are 66. The factory specs are set at that based on running the your cpu at 100mhz. As you raise your fsb, you're also raising those too. The agp runs at 2/3 of your fsb, and the pci runs at 1/3 the fsb. The higher you push your cpu, the more out of spec you take those areas. At a certain point, you either have to lock the agp/pci or reduce their dividers. Depending on your mobo. More than likely that old of a board won't have all those features because the manufacturers didn't cater as much to the o/cer back then as they do now. Try reading your manual to see if you do have the ability to modify those settings.:cool: