32m Low Clock Challenge [Archive] - Page 5

eva2000

06-11-2007, 07:19 AM

Good training indeed. :p:

eva looks like the mchbar is getting messed around with in memset for p35. :S

does the board have fine settings for trfc or is it like p5b where the only options are 42, 35, 30, 25, and 20?

coop--975X will never die.
Full set of bios screens here http://i4memory.com/showpost.php?p=65409&postcount=1 but yes has settings for TRFC but similar to P5B DX 20, 25, 30, 35, 42. Asus bios is nice enough to list them all on right side panel http://i4memory.com/reviewimages/motherboards/asus/P5K_Deluxe/bios/photos/P5K_Deluxe_bios_021.html :)

Misko

06-11-2007, 08:12 AM

New entries from Team Serbia:

11.XX with 2MB cache ;)

http://xs216.xs.to/xs216/07241/ScreenShot042.png

10.XX

http://xs216.xs.to/xs216/07241/ScreenShot095.png

9.XX

http://xs215.xs.to/xs215/07223/WR.JPG

Gautam

06-11-2007, 08:18 AM

Great results Misko. :) I gotta get a 9.xx if I can find time...

Misko

06-11-2007, 08:30 AM

Great results Misko. :) I gotta get a 9.xx if I can find time...

And we will try to catch u at 11.XX :)

Gautam

06-11-2007, 08:42 AM

Hehe, it looks like you'll have it once you switch to 4 MB.

What'd be really sick I bet is 8x 4:5 4-4-4 on P35, that chipset has the potential of crushing every score in this thread easy.

Misko

06-11-2007, 08:54 AM

Hehe, it looks like you'll have it once you switch to 4 MB.

ram can be little more tighten and 4Mb maybe we will make it real close to u :)

What'd be really sick I bet is 8x 4:5 4-4-4 on P35, that chipset has the potential of crushing every score in this thread easy.

Do not underestimate the power of 965 1066 strap above 570MHZ 1:1, j/k :)

3oh6

06-11-2007, 09:17 AM

Do not underestimate the power of 965 1066 strap above 570MHZ 1:1, j/k :)
hahaha, please don't even joke about going 570FSB on the 1066 strap. you cats are already killing it at only 550~560FSB. congrats on all the incredible work but your making it very discouraging for the rest of us...my QuadGT just can't get up that high to compete with you. again, awesome work with the 965 times :up:

Gautam

06-11-2007, 09:30 AM

If you wanna get discouraged why not try my setup for a day. I'm lucky to even do a 32M at 100MHz less than that. :( Maybe its my CPU, maybe its my board, I just have horrible FSB luck...

...but my ram makes up for it. ;)

Misko

06-11-2007, 11:28 AM

hahaha, please don't even joke about going 570FSB on the 1066 strap. you cats are already killing it at only 550~560FSB. congrats on all the incredible work but your making it very discouraging for the rest of us...my QuadGT just can't get up that high to compete with you. again, awesome work with the 965 times :up:

Abit did act the same way in our case, but DFI goes ~30mhz higher on FSB then Abit!!! Also Abit is at same clock little faster then DFI, I suppose it has tighter latencies on NB so it is a little bit faster clock per clock but DFI is better for overclockig. For us if CPU is wall free, we can put 575MHZ on 1066 strap for Spi 32M, and 580MHZ strap 1066 for 1M, suicide shot is at ~590MHZ

3oh6

06-11-2007, 11:38 AM

Abit did act the same way in our case, but DFI goes ~30mhz higher on FSB then Abit!!! Also Abit is at same clock little faster then DFI, I suppose it has tighter latencies on NB so it is a little bit faster clock per clock but DFI is better for overclockig. For us if CPU is wall free, we can put 575MHZ on 1066 strap for Spi 32M, and 580MHZ strap 1066 for 1M, suicide shot is at ~590MHZ
that is just ridiculas...i might have to grab the DFI then as my Quad may have just sung its last song (my fault entirely). i am torn between the DFI and a P5K variant...i told myself only 1 motherboard a month :)

thanx for the information Misko, much appreciated.

d4ve

06-12-2007, 03:13 AM

I'd like to join...

14.xx
http://img408.imageshack.us/img408/8438/14mez8.th.png (http://img408.imageshack.us/my.php?image=14mez8.png)

15.xx
http://img481.imageshack.us/img481/456/15mnz7.th.png (http://img481.imageshack.us/my.php?image=15mnz7.png)

18.xx
http://img378.imageshack.us/img378/713/18mbf8.th.png (http://img378.imageshack.us/my.php?image=18mbf8.png)

19.xx
http://img227.imageshack.us/img227/6065/19moi4.th.png (http://img227.imageshack.us/my.php?image=19moi4.png)
Memset 3.3 beta shows my memory freq at 576MHz while it should be at 494MHz

coop

06-12-2007, 06:29 PM

@d4ve, welcome to the challenge.

eva2000

06-15-2007, 07:52 AM

New PB for 32M at <3600Mhz closing in on sub 13min :)

Straight boot from bios @7x510FSB 4:5 637Mhz 5-5-5-9 3-30-3-3-3 at 2.35v
- Setfsb bumped to 7x513FSB 4:5 641Mhz 5-5-5-9 3-30-3-3-3 at 2.35v

http://fileshosts.com/intel/Asus/P5K_Deluxe/results/Nautilus500/E6700_L629B079/crucial/ballistix/8500c5_2/7x/667/setfsb_513-641_5559_330333_1.5375-x0.63-1.5-2.35-1.4-1.7-x0.67-1.2/cpuz_validated.png

http://fileshosts.com/intel/Asus/P5K_Deluxe/results/Nautilus500/E6700_L629B079/crucial/ballistix/8500c5_2/7x/667/setfsb_513-641_5559_330333_1.5375-x0.63-1.5-2.35-1.4-1.7-x0.67-1.2/superpi-32m_single_13m04s641ms.png

luihed

06-16-2007, 05:20 PM

14.xx entry....

I think this is my first 27xxx PP:D .... very slow start but it starts to pick up speed after loop 6 or so....

http://www3.telus.net/luis99/14.xx.JPG

Algeriano

06-16-2007, 06:54 PM

E6300 @ 3.5 Ghz (500*7, 1.365V)
P5B Dlx 1.45V NB droop moded
1 go crucial ballistix gmh 4-4-4-12
strap 1333

http://www.enregistrersous.com/images/20394830720070617035056.png

On air, scythe infinity

3oh6

06-17-2007, 08:02 AM

3054........3oh6...............14.59.250.....6x509 .....509mhz.....4-4-4-4.....1/1

Tied you lads at the top with a 509x6 but slightly faster :D i couldn't get the extra 9 tenths of a second shaved off to run 508x6.

E6600 6 x 509 (boot from bios)
Ultra-120 (CPU Cooling)
Abit QuadGT (no vmods)
Noctua NC-U6 (NB cooling)
Crucial PC8500 2x1GB // Team PC6400 C3 2x1GB
PCI-E Biostar 7600GS
Silverstone ST56ZF
Seagate 80GB 7200.9
Win2K3 (pretty much my fully tweaked SPi 32M setup)

http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/509x6_509_4444_32m-1.png

pasatoiutd

06-17-2007, 10:52 AM

12.59.203 - E6300 @ 3733 MHz, PSB @ 533 MHz, DDR 1066 4-4-4-4, Asus P5B Deluxe WiFi 1.03G on strap 1333.

3oh6

06-17-2007, 05:11 PM

4482........3oh6...............10.59.828.....9x498 .....498mhz.....4-4-4-4.....1/1...965

yeah, i have nothing better to do this weekend but watch F1, 24hr du mans, the US Open, and run some SPi ;)

this one is a good little improvement for my 10.xx time. i still won't be touching team Serbia without a different board because this QuadGT just won't do 550FSB...no way, no how.

E6600 9 x 498 (boot from bios)
Chilly1 SS (CPU Cooling)
Abit QuadGT (no vmods)
Noctua NC-U6 (NB cooling)
Crucial PC8500 2x1GB // Team PC6400 C3 2x1GB
PCI-E Biostar 7600GS
Silverstone ST56ZF
Seagate 80GB 7200.9
Win2K3 (pretty much my fully tweaked SPi 32M setup)

click for full size including memset...
http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/498x9_498_4444_32m-1sm.png (http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/498x9_498_4444_32m-1.png)

i will be leap frogging past ya Coop in the 15.xx category sometime tonight as well ;)

coop

06-17-2007, 05:49 PM

3oh6, that is a good improvement. If only I had better cooling. 15.xx is difficult for me thus far. I will see if I can do better but...
I do have an advanced weapon though, for about a week now, but still in the box.

Great sub-timings btw.

3oh6

06-17-2007, 08:07 PM

I do have an advanced weapon though, for about a week now, but still in the box.

Great sub-timings btw.
uh-oh...which motherboard do you have sitting there begging to be thrashed? :D
and about the sub-timings...i am quite impressed that this board runs as tight with 2x1GB as it does 4x1GB. especially considering the Ballistix don't run 4-4-4-x that well...they don't run high frequency anyway, but apparently like tight subs ;)

2870........3oh6...............15.59.406.....7x410 .....512mhz.....4-4-4-4.....4/5...965

this will be it from me for a bit...time to get back to testing memory and finding a way to make this QuadGT run higher FSB with 4x1GB.

E6600 7 x 410 (boot from bios)
Chilly1 SS (CPU Cooling)
Abit QuadGT (no vmods)
Noctua NC-U6 (NB cooling)
Crucial PC8500 2x1GB // Team PC6400 C3 2x1GB
PCI-E Biostar 7600GS
Silverstone ST56ZF
Seagate 80GB 7200.9
Win2K3 (pretty much my fully tweaked SPi 32M setup)

click for full size including memset...
http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/410x7_512_4444_32m-1sm.png (http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/410x7_512_4444_32m-1.png)

coop

06-17-2007, 11:09 PM

I noticed you had 4-1Gb. Nice job with that. Thse boards do very well I think. You got me worried earlier so
http://img177.imageshack.us/img177/9729/15xxtopqo5.jpg (http://imageshack.us)
(P5K-E)

Misko

06-18-2007, 02:40 AM

i still won't be touching team Serbia without a different board because this QuadGT just won't do 550FSB...no way, no how.

Maybe u should try to cool down abit NB, we put DI on NB and only then with 1.9V for vMCH 550fsb was possible. Also I did exact comparation between DFI and Abit. At 3.6ghz Abit is faster about 4-5sec!!! First time I did comparation my calculation were wrong and I thought that DFI is similar like Abit but no, Abit is much more faster. So u need 5mhz on fsb less to catch DFI.

Gautam

06-18-2007, 07:51 AM

I noticed you had 4-1Gb. Nice job with that. Thse boards do very well I think. You got me worried earlier so

(P5K-E)

Hahaha, it begins. 4:5 with serious FSB is too much for any other chipset when it comes down to it. Finally Intel chipsets are refined and clocking the way they're supposed to be. Which is why I'm holding off on participating further in this thread till I get my hands on one. :D

Nice clocking coop, that looks like a lot of fun.

3oh6

06-18-2007, 08:14 AM

Hahaha, it begins. 4:5 with serious FSB is too much for any other chipset when it comes down to it. Finally Intel chipsets are refined and clocking the way they're supposed to be. Which is why I'm holding off on participating further in this thread till I get my hands on one. :D

Nice clocking coop, that looks like a lot of fun.
haha...470FSB w/4:5, that isn't fair ;)

thats it...i am done with 965 for this challenge too. time to grab a P35 and be done with it. i still have one more goal to reach on 965 though, 9m XX.XXX @ 5000MHz or less.

@Misko...1.9v and dry ice it is. thankx for all the help in this quest, much appreciated help from team Serbia :up:

Gautam

06-18-2007, 08:28 AM

3oh6

06-18-2007, 08:52 AM

Heh, don't make it sound like that...he's only 1 MHz ahead of what I had on 965. In fact maybe when I get home tonight I might decide to defend 965's honor in the 15.xx category just for that. :p: ;)

IMHO, 410x12 2:3 should be plenty for 9.xx.
you unlock the multi on my E6600 and we will talk. that and don't forget we all don't find 600MHz+ 4-4-4 memory that doesn't require the voltage to kill them at that frequency/timings ;)
it is a different game for us mortals with E6600s and only "decent" memory, not freak sticks, and i have had my share of memory come through my setups but never been lucky enough to get 600MHz 4-4-4 with less than 2.6v which kills memory over time.

Gautam

06-18-2007, 09:29 AM

Heh, I guess I tend to take the multipliers for granted. :p:

coop

06-18-2007, 08:15 PM

"Nice clocking coop, that looks like a lot of fun." Thanks it was. It took a few times.
"thats it...i am done with 965 for this challenge too" that was done with my (watercooled) QuadGT. I have not opened the p5k-e yet. I got it as it was on sale.

d4ve

06-19-2007, 02:54 AM

Update a little..
(tried new memset 3.3 beta 2 with performance level set to 7)
14.xx
http://img443.imageshack.us/img443/7266/pi3214mperf7gh4.th.png (http://img443.imageshack.us/my.php?image=pi3214mperf7gh4.png)

3oh6

06-19-2007, 06:44 AM

"thats it...i am done with 965 for this challenge too" that was done with my (watercooled) QuadGT. I have not opened the p5k-e yet. I got it as it was on sale.
wow, 571FSB on 4:5 is about as impressive a thing as i have seen on the QuadGT. you have one crazy board right there, and just water cooling. my waterpump died last week but i think i am going to vMCH mod the board right now to see what i can get out of mine on air...i am not expecting your results but any little bit more would be nice. congrats and very very nice frequency :up:

Gautam

06-19-2007, 07:05 AM

A quadgt?? :eek2: No way, that's awesome! :clap:

dinos22

06-19-2007, 07:13 AM

Heh, I guess I tend to take the multipliers for granted. :p:

biatch :p:

coop

06-19-2007, 10:36 PM

3oh6,
Gautam, thanks. Only 471 fsb though. I have a Swiftech NB cooler and did do some of the vmods. Vmch mod and colder NB really helps on mine.

d4ve

06-20-2007, 06:34 PM

Update 17.xx timezone

http://img408.imageshack.us/img408/4084/17mperf7py1.th.png (http://img408.imageshack.us/my.php?image=17mperf7py1.png)

over@locker886

06-21-2007, 05:11 AM

I played little baby:) ..maybe New E2160 32M WR
12.XXX category
http://img340.imageshack.us/img340/9856/e216012min27secof0.jpg

andre X_X

06-21-2007, 06:12 PM

http://img.techpowerup.org/070621/13XX%20P5K.png

Gautam

06-22-2007, 05:41 AM

How far have you dived into the strap setting andre?

coop's 4:5 result on 965 is waay faster than all the P35 results...I wonder if can P35 be tweaked to match this?

andre X_X

06-22-2007, 07:24 AM

i just received the board yesterday, cant explore much for now..
yes coops 4:5 is waay faster, maybe with more vmch i be able to use lower perf level. 1.7v isnt enough. i might be able to touch 3.3ghz but its veerry hard to sub 3.3ghz.... maybe my tweaks wasnt enough..

d4ve

06-23-2007, 03:10 AM

Update on 18.xx Timezone
http://img530.imageshack.us/img530/6624/18mperf7gm6.png

Coop, could you please update my entry at 17.xx timezone below..
Don't see my entry at the first page... thanks
http://img408.imageshack.us/img408/4084/17mperf7py1.th.png (http://img408.imageshack.us/my.php?image=17mperf7py1.png)

@Andre : Hi, is that Jozzy's P5K?

coop

06-23-2007, 01:10 PM

d4ve, your posted
I was able to tie you Gautam for second w/same clock. My board is faster at 4/5 than at 2/3. Even at 400/600 for 3600.
http://img79.imageshack.us/img79/5410/16xx2658ey6.jpg (http://imageshack.us)

coop

06-23-2007, 09:11 PM

That was a very good run Oldscarface.
http://img408.imageshack.us/img408/1291/p1010630ky1.jpg (http://imageshack.us)

edit: I put it back, I didn't know if you would mind. It took me 2 nights of work. Thanks.

Oldscarface

06-23-2007, 11:59 PM

@coop

Thanks mate.
Yours isn't that bad either ;) :up:
You have improved a lot over the last couple off weeks :clap:

I believe that there are not many mainboards like yours that works that well with the 4/5 memdivider.
My Commando really does not like the 4/5 memdivider (bios 0803)
Perhaps bios 1001 will improve that, but I doubt that.

@Gautam

I really try to beat you, but it is darn hard to do so :mad: :(
Especially 12,xx and 13,xx catagory.
Those times you put there are from another gallaxy.

blindfitter

06-24-2007, 12:12 AM

Heres Mine

http://img59.imageshack.us/img59/291/pi321135ho7.jpg (http://imageshack.us)
By blindfitter (http://profile.imageshack.us/user/blindfitter) at 2007-06-24

coop

06-24-2007, 12:26 AM

blindfitter, welcome. I hope that is not with your water cooling. Nice run. However, for this we want the lowest speed in the time zone. If you look at the 11.xx section you can see peolpe are doing 11 min. with 400 to 650mhz lower than yours. I'm not singling you out as others who may want to post can benefit from this as well. The lower the speed for a given time zone is what we are after. Your system should be capable of some very good runs if you would like to give it a go. Thanks.

bachus_anonym

06-24-2007, 09:30 AM

Heya coop,

Can DDR3 results be submitted? If so, I have some fast 12:xx and 11:xx candidates here (http://www.xtremesystems.org/forums/showthread.php?t=149028) - almost beat Gautam by 100MHz in 11:xx, but I could not find a way to shave off 3 secs :( I'm also working on sqeezing P5KD a bit harder and will submit something on Monday.

Awesome results there Gautam and coop! :up:

coop

06-24-2007, 12:51 PM

Hey BA, you bet. I will just denote DDR3 like chipset for now. Some of your entries from half a year or more ago still are up there in the catagories.

Oldscarface

06-24-2007, 01:24 PM

11,xx

Oldscarface

06-24-2007, 01:32 PM

14,xx

andre X_X

06-24-2007, 01:47 PM

just testing P35 for 10xx
only mild tweak, windows not tweaked much.... still have some mhz to cut, too bad i have to return the mobo :(

http://img.techpowerup.org/070624/1058%204486372.jpg

coop

06-24-2007, 07:30 PM

Thanks Oldscarface. Amazing ram speed.

Gautam

06-24-2007, 07:41 PM

Woot! One for the home team, 965 still lives. :D WTG oldscarface.

luihed

06-24-2007, 11:46 PM

Entry 15.xx

Testing out the new board.... not used to running high mhz on rams ( for me lol ) ......

http://www3.telus.net/luis99/15.xx1.JPG

eva2000

06-25-2007, 01:11 AM

14,xx

nice clocks! what bios settings did you use for commando ? i can't get any memory past 600-620+mhz stable with commando and 1001 bios

if you could provide the settings used with this template would appreciate it alot :)

Bios Template:

Extreme Tweaker:
AI Tuning: Manual
CPU Frequency:
DRAM Frequency: DDR2-533MHz (1:1 Divider), DDR2-667MHz (4:5 Divider), DDR2-800MHz (2:3 Divider), DDR2-889MHz (3:5 Divider), DDR2-1066MHz (1:2 Divider)
PCI Express Frequency: 100
PCI Clock Synchronisation: 33.33
Spread Spectrum: Disabled
CPU Vcore Voltage: Auto
FSB Termination Voltage: Auto
NB Vcore: Auto
Memory Voltage: 2.00v
DDRII Channel A REF Voltage: Auto
DDRII Channel B REF Voltage: Auto
DDRII Controller REF Voltage: Auto
SB Vcore (SATA, PCIE): Auto
SB Chipset Voltage: Auto

Asus C.G.I.: Disabled
Static Read Control: Disabled
Configure DRAM Timing by SPD: Disabled
- DRAM CAS# Latency: 4
- DRAM RAS# to CAS# Delay: 4
- DRAM RAS# Precharge: 4
- DRAM RAS# Activate to Precharge: 12
- DRAM Write Recovery Time: 6
- DRAM TRFC: 42
- DRAM TRRD: 10
- Rank Write to Read Delay: 10
- Read to Precharge Delay: 10
- Write to Precharge Delay: 10

Legacy USB Support: Disabled

CPU Configuration
Modify Ratio Support: Enabled
- Ratio CMOS Setting: 11x
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM function: Disabled
Execute Disable Bit: Disabled
PECI: Enabledthanks :)

Oldscarface

06-25-2007, 11:50 AM

Woot! One for the home team, 965 still lives. :D WTG oldscarface.

Gautam, I believe this is for now the max for my system.
I have tried every tweak I know to get this result.
But for the 12,xx and 13,xx catagory it is still not enough :mad: but I will keep on trying.

Perhaps we can joint our forces to beat the P35-clan :D

Oldscarface

06-25-2007, 12:20 PM

nice clocks! what bios settings did you use for commando ? i can't get any memory past 600-620+mhz stable with commando and 1001 bios

if you could provide the settings used with this template would appreciate it alot :)

Bios Template:
thanks :)

eva2000 :
First off all I'am still using bios 0803 :
Which memdivider do you use?
And what is your mem voltage?
Memdivider 2/3 is absoluut the best for this board.
Memdivider 4/5 does not work propperly, but most P965 board have that problem.
But here are my settings from the bios, I hope it will help you.

Extreme Tweaker:
AI Tuning: Manual
CPU Frequency: boot with FSB 400Mhz, in windows with SetFSB to 420Mhz and apply, then to 439Mhz and apply.
DRAM Frequency: DDR2-800MHz (2:3 Divider) = 1200Mhz @ boot and 1317 @ FSB 439Mhz
PCI Express Frequency: 100
PCI Clock Synchronisation: 33.33
Spread Spectrum: Disabled
CPU Vcore Voltage: 1,5875V
FSB Termination Voltage: Auto
NB Vcore: Auto
Memory Voltage: 2.625V (2,600V also works)
DDRII Channel A REF Voltage: Auto
DDRII Channel B REF Voltage: Auto
DDRII Controller REF Voltage: Auto
SB Vcore (SATA, PCIE): Auto
SB Chipset Voltage: Auto

Asus C.G.I.: Disabled
Static Read Control: Disabled
Configure DRAM Timing by SPD: Disabled
- DRAM CAS# Latency: 5
- DRAM RAS# to CAS# Delay: 5 => In windows with Memset I change the Write Delay to 4.
- DRAM RAS# Precharge: 5 => In windows with Memset I change it till 4
- DRAM RAS# Activate to Precharge: 5
- DRAM Write Recovery Time: 5
- DRAM TRFC: 35 => In windows with Memset I change 25
- DRAM TRRD: 3
- Rank Write to Read Delay: 10
- Read to Precharge Delay: 5
- Write to Precharge Delay: 10

Legacy USB Support: Disabled

CPU Configuration
Modify Ratio Support: Enabled
- Ratio CMOS Setting: 9x
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM function: Disabled
Execute Disable Bit: Disabled
PECI: Disabled

Viss

06-25-2007, 12:34 PM

Best 32M bencher we have here in our little country, klasse :up:

andre X_X

06-25-2007, 12:37 PM

Oldscarface

06-25-2007, 01:23 PM

Best 32M bencher we have here in our little country, klasse :up:

Thanks (bedankt) loc.o

Oldscarface

06-25-2007, 01:38 PM

14XX Category
ah.... soo close to you oldscareface.... too bad i have to return this memory..
im trying for 11xx category but my ram wont stable... my room is too hot, the spreader is getting warm...

http://img.techpowerup.org/070625/14xx.png

Yeah indeed, so close.
I could be that if you make another run, you will have it.
Try to lower the tRFC to 21-23, that can make the difference.
(if you can keep the mems a little bit longer)

andre X_X

06-26-2007, 03:40 AM

this is my entry for 15xx
not to good
http://img.techpowerup.org/070626/15xx.png

luihed

06-26-2007, 10:52 AM

Yeeessssss....... Finally made 12.xx under 3600mhz:D Probably not a big deal now with the P35 boards but Im still so happy:D .... It was on the first run too at this speed with this board and mems, just wanted to see how far Ill be to 13m lol.....

Abit IP35
Ballistix 8500.....

12.xx entry...

http://www3.telus.net/luis99/3598.JPG

Gautam

06-26-2007, 10:54 AM

Very very good run bro. Definitely the best I've seen on 7x 1:1.

over@locker886

06-26-2007, 11:05 AM

Great;)

What is the max fsb for Abit?

luihed

06-26-2007, 11:15 AM

Thanks .....

Gautam, THis run was using 5:6 divider not 1:1.... @ 1:1 I think my best was 13m08s, a couple of ticks slower than the 965-s..... This new divider is awesome cos its easy to run, I cant run the 4:5 divider on this board past 470fsb.....

Over@locker, highest I ran 32m is around 540fsb... my cpu has fsb wall at around 552fsb so I didnt really try to much after running 540fsb.... I think its my cpu thats limiting and not the board.... This boaord is pretty fast though cos I never had to use the PL on memset...

luihed

06-26-2007, 11:16 AM

whoops

erwinz

06-26-2007, 11:56 AM

3oh6

06-26-2007, 02:48 PM

Gautam, THis run was using 5:6 divider not 1:1.... @ 1:1 I think my best was 13m08s, a couple of ticks slower than the 965-s..... This new divider is awesome cos its easy to run, I cant run the 4:5 divider on this board past 470fsb.....

Over@locker, highest I ran 32m is around 540fsb... my cpu has fsb wall at around 552fsb so I didnt really try to much after running 540fsb.... I think its my cpu thats limiting and not the board.... This boaord is pretty fast though cos I never had to use the PL on memset...
congrats on the sub 13m - sub 3600MHz luihed!
and thanks for the info on the IP35. after the death of my QuadGT i am up in the air of whether or not to buy another QuadGT to replace it and continue on my fight for sub 10m - sub 5GHz with the E6600 (AKA 555x9)...or if i should switch to the DFI 965-S...or if one of the new P35s is the right choice such as the IP35.

your comments on the 514x7 1:1 really have me thinking this IP35 isn't that far behind the 965-s and the QuadGT. my best on the QuadGT 514x7 1:1 is 13m 03.xxx so likely just a couple ticks faster than the 965-s which in turn is just a couple ticks faster than this IP35. the big advantage for the IP35 is the memory clocking ability and the FSB over the QuadGT...the 965-S is still a tough choice to turn down for my purpose. i should just buy all three and have a showdown but i have bought faaaaaar too many motherboards already this year :)

luihed

06-26-2007, 05:06 PM

Thanks er and 3oh6....

I was surprised myself on how close this board was at 1:1 to the 965-s....my best with the 965-s was 13.06 with 4-4-3-4, but my normal time is 13.09 (4-4-4-4) at 514.3fsb (3600), with this board I was hitting 13.11 (4-4-4-4) but at only 3598mhz cos setfsb will never work on this board.....

Instead of buying 3 boards, just buy this and get 2 more sets of rams:D People say that at 500fsb+ this board is at 1333strap, thats bullsh!!t cos only 1066strap can run this fast.... Also like I said before, I never had to play with the performance level in memset cos its always at the lowest level possible:) .....

Funny thing is that run I did was just a test to see where this board is at lol.... You guys will do some damage with this board, I think in the right hands and using 4:5 divider 12.3x is possible......

coop

06-26-2007, 09:16 PM

Congrats luihed on your 12.xx.

d4ve

06-27-2007, 04:57 PM

Entry for 16.xx
http://img215.imageshack.us/img215/8789/16mperf7ok6.th.png (http://img215.imageshack.us/my.php?image=16mperf7ok6.png)

hadji_a

06-29-2007, 07:03 AM

for the 12.xx category
dfi 965-s

d4ve

06-29-2007, 09:39 AM

update for 19.xx timezone with PL5
http://img502.imageshack.us/img502/796/19mpl5wx6.th.png (http://img502.imageshack.us/my.php?image=19mpl5wx6.png)

entry for 13.xx
http://img502.imageshack.us/img502/2471/13mxp3.th.png (http://img502.imageshack.us/my.php?image=13mxp3.png)

NewBeetle

06-29-2007, 10:10 PM

update for 13.xxx category

water-cooling
CPU:E6600
Mem:Team Xteem PC2-6400
MAXMEM=555

http://homepage2.nifty.com/NewBeetle/P5K-32M_13m56s734_3300MHz.png

erwinz

06-30-2007, 07:29 AM

very nice NewBeetle.. :D

luihed

06-30-2007, 02:46 PM

Getting lower:D .... sucks that I cant use setfsb cos the abit prog goes in 1 fsb increments.... Gautam, you need to pick up one of these:) ....

12.xx

http://ocidb.com/albums/userpics/10062/3591.JPG

coop

07-01-2007, 08:08 PM

Sorry for my tardiness. I went insane and lost a week of my life. I was trying to get .001 sec quicker than this but it is not to happen. PF-512mb to 1023, maxmem from 640mb to 570mb. Waza sizes and delays. Spi in different drives. Affinity-RT etc. It was kinda fun in a sordid way now that I'm done.
http://img164.imageshack.us/img164/7294/1300000cj5.jpg (http://imageshack.us)
I have conceeded and will move on, and update the thread. Time for 11.xx then P35.

erwinz

07-01-2007, 08:31 PM

DJSUB

07-01-2007, 08:45 PM

14.xx.xx Entry

http://img167.imageshack.us/img167/5126/14m5memsetuf5.png

i need to learn copywazza, maxmem & eram to get a better score :)

tnx

DJSUB

07-01-2007, 09:33 PM

15.xx.xx Entry

http://img214.imageshack.us/img214/3199/15m58797smemsetww1.png

tnx

fireice2

07-02-2007, 08:46 AM

DJ, man I can't compete here yet. :D alaws mems. Need better mems for low clock challenges.

Gautam

07-02-2007, 08:53 AM

coop, there is no way in hell you can stop there. I don't care if its a been a week. :D What board is that?

fredyama

07-03-2007, 02:22 PM

Thanks NewBeetle for the loan of your awesome E6700 L633A549 #2;)

P5K#2
Air Cooling
Team PC2-6400 CL4
1.36Vcore, 1.579Vnb, 2.542Vdimm
FSB550@boot
Maxmem=600, Copy Waza

http://premium1.uploadit.org/fredyama//P5K_2-NB-E6700-FSB550-Team6400-1.36Vcore-1.579Vnb-2.542Vdimm-modPI32M-13m56.485s-3300GHz.gif

coop

07-04-2007, 12:22 AM

@Gautam, thanks 4 the encouragement. It is my QuadGT. I will give it a go now and then but I am out of ideas.

Gautam

07-04-2007, 11:51 AM

Okay, have you ever tried a maxmem below 500? I think your page file is too large as well. I set 48-96. I like using large copy waza sizes (>5GB). Copy to the benching partition and then from it instead of just once as well.

luihed

07-04-2007, 05:19 PM

This is gonna be close.... Just did 9m56s @ 5040mhz, Im gonna try 9.xx @ less than 5ghz....my stupid board is acting up again though :(...

Gautam

07-04-2007, 05:21 PM

I see your LN2 session is going well. :p:

luihed

07-04-2007, 05:30 PM

i lil better now... yesterday it was a nightmare and I didnt get to do anything.... but it looks like Im topping out at around 5100mhz.....

This board is acting up big time even today.... everytime I have a bad setting I have to start from low clocks ( below 400fsb) and make my way up... FFS, im doing 16m runs ar 3800mhz righ now at -120c lol....

Gautam

07-04-2007, 05:42 PM

I've gotten used to working up. Though I usually start around 4800-5000. You might be using too much or too little vcore.

3oh6

07-04-2007, 05:44 PM

This is gonna be close.... Just did 9m56s @ 5040mhz, Im gonna try 9.xx @ less than 5ghz....my stupid board is acting up again though :(...
congrats! nice to see another E6600 join that sub10 club. best of luck in the sub5GHz/sub10m quest, looks like the new pot is working out rather nicely for you :up:

despite the frustration...don't forget to have fun ;)

DJSUB

07-04-2007, 07:40 PM

16.xx.xx Entry :D

http://img455.imageshack.us/img455/3214/279816mentrymemsetsa8.png

luihed

07-04-2007, 08:02 PM

Im getting used to it... the bios in this board gets screwy as in thiers corruption in the bios screen, and I cant get rid of it at times..... anyways I couldnt get another run to finish so I guess this is what I got.... Im happy with the time its just frustrating sometimes when you have a promising start and then nothing happens... this run was done in the first hour, didnt finish another run after at both higher and lower speed :(

9.xx entry...

http://www3.telus.net/luis99/5040.JPG

erwinz

07-04-2007, 08:27 PM

3oh6

07-04-2007, 10:23 PM

Im happy with the time its just frustrating sometimes when you have a promising start and then nothing happens... this run was done in the first hour, didnt finish another run after at both higher and lower speed :(
sounds exactly like my last 32M session with the QuadGT and dry ice...best run in the first 30 mins of a 5 hour session.

remember though, you are one of a very select few, as in a handful that is missing fingers, with a sub 10min E6600...big congrats on that :up: :up:

luihed

07-05-2007, 12:32 AM

sounds exactly like my last 32M session with the QuadGT and dry ice...best run in the first 30 mins of a 5 hour session.

remember though, you are one of a very select few, as in a handful that is missing fingers, with a sub 10min E6600...big congrats on that :up: :up:

Thanks man... Yeah its been like this for me the last couple of times, get your best run early on and then nothing for the next few hours lol.... The thing is at this PP it puts me at 5006mhz, I had so much room to tighten up my timings and also the run above wasnt even at realtime priority.... Under 5gs was so doable and I was right there, thats what made it frustrating.... I didnt even get a decent 1M run or even a decent screenie lol.... But #12 overall and #2 E6600 at HWbot is very alright for me:D not to mention #1 9.xx in the toughest and the best low clock challenged in the world hehe..:)

If it wasnt for this thread I wouldnt have put so much time to learn spi32m, I still suck compare to you guys but Ive learned so much:)

Gautam

07-05-2007, 09:23 AM

You did a great job bro. I haven't even bothered to try 32M yet on LN2. Props to you for jumping straight into it.

luihed

07-05-2007, 12:39 PM

erwinz

07-05-2007, 07:20 PM

Thanks bro... I was practising on this run here to keep the temp in a 5c range which was alot harder than I thought... I totally give kingpin a whole new kind of respect cos he does it with 3 pots ......

yup i have high regards for 3Dmark LN2 benchers.. :) they are one of a kind..

I tinhk their "pouring skills" are on the top.. :D

btw congratz again luihed.. :)

druchii

07-05-2007, 08:11 PM

My entry was abysmal, 16m 57sec @3150Mhz. I'm guessing due to RAM latency and the 2Mb cache on my E6300. Anyway, thought i'd post it anyway.

Specs are in the signature, copied for anyone with sigs off:
Intel Core 2 Duo E6300 (3.15Ghz, 1.36v) | Scythe Ninja Plus Rev.B + Arctic Cooling AF12025
2x1Gb GeiL PC6400 5-5-5-18 2.1v
Gigabyte 965P-DS3 F11 BIOS
2x 250Gb SATA2 16Mb Cache
NEC ND3550A DVDRW
ATI X1600XT 256Mb

Interestingly my temps when loading both cores hit 65'C. Should i make a thread on this?

Anyway, screenie is below.

http://img296.imageshack.us/img296/7148/32mchallengehb7.jpg (http://imageshack.us)

Misko

07-06-2007, 03:36 AM

Thanks bro... I was practising on this run here to keep the temp in a 5c range which was alot harder than I thought... I totally give kingpin a whole new kind of respect cos he does it with 3 pots ......

And I suppose there was a little ln2 in the pot, lets say 0.5-1cm of ln2 on the bottom of the pot.

luihed

07-06-2007, 02:01 PM

yeah.... Its alot different than I though cos to reach say -120c, I had to fill the pot maybe 5-6 times or maybe more from the start.... then when I reached that temperature, even if there was no ln2 in the pot the temperature stayed there and I just splash a lil to maintain it.... With all the smoke I cant really tell how much ln2 is there but I think my pot is very slow..... I was trying to be in a 5c range but i was more in the 10c range cos sometimes i pour too much and the temp will go down too much..... I was only practising so I wasnt near my coldbug, I got as cold as -140c and still my e6600 was running..... for pactice I try to stay between -115c to -120c.....

I am also thinking that I made an error in my pot design, The bottom is 48cm wide and even though I drilled a hole thats deep for the probe, it might still be too far from the core to read accurately....

Sorry for the OT guys..

Stapler

07-06-2007, 06:08 PM

Nice job Luihed, wish I didn't have to sell my e6600 before getting a dewar. My last dry ice run was the same way, first run was the best and after that nothing but problems. Didn't get any tweaking at all, just one run to see if it was stable and after that it was a no go.

coop

07-06-2007, 08:50 PM

druchii

07-07-2007, 05:10 AM

@luihed, congratulations on your 9.xx run. You seem to have taken to this 32m very well. Nice work.
@Gautam, I tried but results were poor. My board started acting up. I thought it may be condensation on NB but everything is coated well and was safe in that respect. At least it is starting to get back. (I can boot up to win and do 32m @ default) Still trouble with getting volts up. I'm not sure what happened but it was kind of severe.
@druchii, I'm sure you would like to try to get a better run to post. So much information here to use. I'm confident with some more effort you will do better.

I'll do better, just need to get this rig setup properly. Might dedicate Monday or Tuesday to tweaking the hell out of it, use one of the overnights to see if my Geil can do CAS4 @ 900Mhz. Maybe she can with 2.2v. My CPU is on it's edge though, any more and she falls, sadly (Due to heat, and what i can only guess is a crap power supply) Thanks though :)

DJSUB

07-07-2007, 03:42 PM

19.xx.xx Entry

E6600 @ 2287mhz
DFI Infinity 965
Team Xtreem 2x512MB PC6400

http://img294.imageshack.us/img294/5189/19m54437smemseteditedbd2.png

Gautam

07-07-2007, 03:45 PM

Gautam, I tried but results were poor. My board started acting up. I thought it may be condensation on NB but everything is coated well and was safe in that respect. At least it is starting to get back. (I can boot up to win and do 32m @ default) Still trouble with getting volts up. I'm not sure what happened but it was kind of severe.
:brick: Sucks to hear. Were you trying to subzero cool your northbridge?

luihed

07-08-2007, 03:12 AM

Thanks coop and stapler....

nice run DJSUB :).... starting to show some nice times.....

DJSUB

07-08-2007, 03:38 AM

tnx fafs :D
i'm still hoping to get better score nxt time :D

hadji_a

07-08-2007, 04:07 AM

giving 2:3 a go on the 965-s

DJSUB

07-08-2007, 06:13 AM

18.xx.xx Entry

E6600 @ 2405mhz
DFI Infinity 965
Team Xtreem 2x512MB PC6400

http://img376.imageshack.us/img376/6816/18m59218s2405mhzmemseterv8.png

coop

07-08-2007, 04:55 PM

Gautam, no, but I use cold water and if I run too long it forms condensation around the NB block. NB chip is painted though and I have fans on it. I think it started during the time I was working on the 12.xx and finally broke down. I checked my rams each as it would only boot with one at first.
Nice run hadji a.

DJSUB

07-08-2007, 11:28 PM

17.xx.xx Entry

E6600 @ 2573mhz
DFI Infinity 965
Team Xtreem 4x512MB PC6400

http://img412.imageshack.us/img412/49/17m55062s2573mhzmemsetqn6.png

luihed

07-09-2007, 06:58 PM

11.xx entry..

http://ocidb.com/albums/userpics/10062/normal_11_xx.PNG

closest miss ive had so far.... just couldnt get that lil bit to improve my score....
http://ocidb.com/albums/userpics/10062/normal_xx12_xx.PNG

luihed

07-10-2007, 12:13 AM

16.xx

http://ocidb.com/albums/userpics/10062/normal_16_xx.PNG

beerking

07-10-2007, 06:46 AM

Very nice

luihed

07-12-2007, 12:53 AM

13.xx

http://ocidb.com/albums/userpics/10062/normal_13_xx.PNG

coop

07-14-2007, 04:44 PM

3oh6

07-14-2007, 04:57 PM

Updated. Been busy, got rid of one of my DFI NF4 computers and put my QuadGT out to pasture, it is under a Tuniq Tower now. http://img361.imageshack.us/img361/9410/p1010721mh1.th.jpg (http://img361.imageshack.us/my.php?image=p1010721mh1.jpg)
Am looking forward to setting up the P5KE.
what?!?! your monster QuadGT isn't going to be 'racing' anymore and has been retired to stud? i thought you were going to sell it to me when you were done benching ;)

i'll trade ya my P5B-Dlx (vCORE, vMCH mods & a little bit of sticky stuff around the socket) for it if your interested...LMK.

hipro5

07-22-2007, 05:27 AM

Just some testings.....with the ASUS Blitz Formula...:)

http://www.hipro-tech.com/images/hipro5/ASUS_Blitz_Formula/Super_Pi_12.57.047_3602_515fsb_618rams_1.png

http://www.hipro-tech.com/images/hipro5/ASUS_Blitz_Formula/Super_Pi_12.57.047_3602_515fsb_618rams_2.png

http://www.hipro-tech.com/images/hipro5/ASUS_Blitz_Formula/Super_Pi_12.57.047_3602_515fsb_618rams_3.png

http://www.hipro-tech.com/images/hipro5/ASUS_Blitz_Formula/Super_Pi_12.57.047_3602_515fsb_618rams_4.png

dinos22

07-22-2007, 05:36 AM

running ram at that speed helps a lot :D :up: :clap:

over@locker886

07-22-2007, 07:31 AM

Just some testings.....with the ASUS Blitz Formula...:)

Great work!! Tras-2 is the best in Asus Blitz?:rolleyes: hmm,interesting..

hipro5

07-22-2007, 11:54 PM

This is with my Tweaked for Super-Pi HDs..... :)
PATA HDs Western Digital 80GB.....One HD for the Windows and one HD for the Page File.... ;)

Sorry Fredyama my friend.... :(

....and yes......ASUS Blitz Formula IS VERY FAST......;)

http://www.hipro-tech.com/images/hipro5/ASUS_Blitz_Formula/Super_Pi_12.55.422_3602_515fsb_618rams_1.png

http://www.hipro-tech.com/images/hipro5/ASUS_Blitz_Formula/Super_Pi_12.55.422_3602_515fsb_618rams_2.png

http://www.hipro-tech.com/images/hipro5/ASUS_Blitz_Formula/Super_Pi_12.55.422_3602_515fsb_618rams_3.png

It seems that the "older" cpuz didn't read the right tRAS in the above picture.....It is 2 and not 5 as it says.....

http://www.hipro-tech.com/images/hipro5/ASUS_Blitz_Formula/Super_Pi_12.55.422_3602_515fsb_618rams_4.png

Gautam

07-23-2007, 06:10 AM

You got me. :(

I'll get my hands on this board soon too for sure. :D Well...that is given that normal people are allowed to get their hands on it before X38's debut...

Timbosan

07-23-2007, 07:29 PM

Untweaked XP pro sp1. All processes still running.

fredyama

07-24-2007, 04:27 AM

[QUOTE=hipro5;2324588]

Sorry Fredyama my friend.... :(

No problem hipro5-san because you are not the one:D;)
Congrats on your awesome time:clap: :clap: :clap: :toast:

hipro5

07-24-2007, 05:17 AM

[QUOTE=hipro5;2324588]

Sorry Fredyama my friend.... :(

No problem hipro5-san because you are not the one:D;)
Congrats on your awesome time:clap: :clap: :clap: :toast:

:D :rofl:

gandalfone

07-24-2007, 09:18 AM

Hehe hipro The Blitz is fast, but also the p5k dlx is not bad:D

P5k dlx
e6600@515x7
teamgroup 9600 5:6

62082

hipro5

07-24-2007, 10:23 AM

Hehe hipro The Blitz is fast, but also the p5k dlx is not bad:D

P5k dlx
e6600@515x7
teamgroup 9600 5:6

Heh, heh.........same chipset..... :p:
You work with 2k3 or XP....?

gandalfone

07-24-2007, 10:31 AM

Heh, heh.........same chipset..... :p:
You work with 2k3 or XP....?

:D

Win2k3;)

PS: which max Vcore and Vmem give the blitz??
Thz

massman

07-25-2007, 04:47 AM

Not fast or tweaked ... :D

http://www.xtremesystems.org/forums/attachment.php?attachmentid=62129&stc=1&d=1185364007

JMKS

07-25-2007, 05:26 PM

http://img512.imageshack.us/img512/999/32msub14m3374kr4.th.jpg (http://img512.imageshack.us/my.php?image=32msub14m3374kr4.jpg)

3374.3......JMKS...............13.59.297.....7x482 .....602mhz.....4-4-4-4.....4/5...P35

edit:
http://img517.imageshack.us/img517/3112/32msub15m3129fo2.th.jpg (http://img517.imageshack.us/my.php?image=32msub15m3129fo2.jpg)
3129......JMKS...............14.59.172.....7x447 .....670mhz.....5-5-4-4.....2/3...P35
2,55V also and it is near end of that RAM - tRFC 35; 30 was unstable ;)

Allendale of course

2,55V RAM

Training with P35 and some fine RAM :)

luihed

07-28-2007, 11:00 PM

14.xx entry

http://ocidb.com/albums/userpics/10062/normal_14_57.png

The blitz is pretty fast but the IP35 pro is also not too bad:D ....
http://ocidb.com/albums/userpics/10062/3605.png

coop

07-28-2007, 11:31 PM

Welcome to the new members (and old) making contributions to the thread. Thank you. If your time did not get posted please make another run at a lower core speed or a higher time bracket to be closer to the speeds already posted in that catagory so we can keep the range as narrow as possible.

gandalfone

08-02-2007, 05:51 PM

Asus p5k3 dlx
TeamGroup DDR3 1600
win2k3

62470

C.h.r.i.s

08-03-2007, 05:08 PM

Finally i've got a decent hw for some low clock challenge...
15'59"@2807.4mhz
http://www.pctuner.info/up/results/_200708/th_20070804021104_2806mhzsub16.jpg (http://www.pctuner.info/up/image.php?src=_200708/20070804021104_2806mhzsub16.jpg)
14'59"@3015.5mhz
http://www.pctuner.info/up/results/_200708/th_20070804020415_3015mhzsub15.jpg (http://www.pctuner.info/up/image.php?src=_200708/20070804020415_3015mhzsub15.jpg)

E6600-P5K DLX-CELL SHOCK 1000C4

gandalfone

08-03-2007, 06:29 PM

p5k3 dlx
teamgroup ddr3 1600
e6600
win2k3

62492

NewBeetle

08-03-2007, 09:12 PM

update for 13.xx category

cooling : Dry Ice
CPU : E6700 L633A549 #7
Mobo : ASUS P5K
Mem : Team Xteem PC2-8500 C4
MAXMEM=600

rig is here (http://homepage2.nifty.com/NewBeetle/P5K+Tara-chan_1st_800.jpg)

http://homepage2.nifty.com/NewBeetle/12xx_12m52s468.png

Gautam

08-03-2007, 09:18 PM

:eek:

That is just not fair! :lol:

Excellent time NewBeetle-san, you are the master of CPU and FSB clocks. :toast:

NewBeetle

08-03-2007, 09:45 PM

:eek:

That is just not fair! :lol:

Excellent time NewBeetle-san, you are the master of CPU and FSB clocks. :toast:
Hi, Gautam-san. :)

I think so, too!!! :p:

I want a CPU that works by FSB600 as for the normal temperature. :D

DEWA DEWA ～
NewBeetle

gandalfone

08-04-2007, 02:57 AM

Wow chris.....great time with that Mhz!!!! Yours O.S. is the best for me;)

C.h.r.i.s

08-04-2007, 03:37 AM

Wow chris.....great time with that Mhz!!!! Yours O.S. is the best for me;)

Thx,i think it's a good os like your but not the best :)

gandalfone

08-04-2007, 04:01 AM

Thx,i think it's a good os like your but not the best :)

mmm....ok...the scores are here, you con see that. what's the best chris??:D ;)

C.h.r.i.s

08-04-2007, 05:08 AM

mmm....ok...the scores are here, you con see that. what's the best chris??:D ;)

Have you tried 15' & 14' with the same settings and timings?

over@locker886

08-04-2007, 05:47 AM

JMKS

08-04-2007, 07:03 AM

Maybe 3540Mhz enough for sub 13min?
3600 * [12*60+52.468] / [13*60] = ~3565MHz => it can be lowest sub13, faster than that DDR3 runs :yepp: - in fact just miliseconds different than gandalfone DDR3 result ;) - clock for clock that runs are almost identical :)

3540MHz (or lower ;)) possible with DDR3 590x6 2:3 :D

coop

08-07-2007, 12:19 AM

I'm here. Some distractions of late. I will update times on 8/7, S2G. I have been able to play with p5k finally and am working on sub 13. So far 13.01 @ 3612. No vmods right now and I can't get mem down to cas4 over 600. From the post above I could of picked a better catagory. Very nice runs.
http://img467.imageshack.us/img467/160/32m13013612tp1.th.jpg (http://img467.imageshack.us/my.php?image=32m13013612tp1.jpg)

massman

08-07-2007, 05:11 AM

15.XX entry:

http://www.hwbot.org/signature.img?iid=11423&thumb=false

gianlu

08-11-2007, 02:03 AM

p5k
e6600 @ air
crucial ballistix 8500

13'59"@3281.8mhz
http://www.pctuner.info/up/results/_200708/th_20070811105750_13.59.750.JPG (http://www.pctuner.info/up/image.php?src=_200708/20070811105750_13.59.750.JPG)

coop

08-12-2007, 03:51 PM

^^ nevermind your 'orrible' english. Your screen gets your message across very well. Good time.

As for me, the sub 13@ 3600 or less is still not to be. I was able to fix up a 'clip on' vddr mod. The best I've got so far. I shorted my board starting it, and had to go by a new one. http://img207.imageshack.us/img207/8804/1259812cl0.jpg

coop

08-17-2007, 11:29 PM

WOOT WOOT frick frack forking WOOT

Finally got there. Retail 0201 bios
My Crucial 8500's (2.82v) :D
MaxMEM=580 waza=1gb PageFile=512mb
It seems to be able to "breathe" better with looser timings. Much better.

Gautam

08-18-2007, 06:09 AM

lol, about time. :p:

coop

08-22-2007, 02:01 AM

^^ thank you :) got another one.
pagefile 1023 maxmem 600 2.70vdimm 1gb waz

http://img292.imageshack.us/img292/6/1257375wb5.jpg (http://imageshack.us)

Unseen

08-23-2007, 05:30 AM

Stock cooling
P5k-e/wifi
Vdimm mod

:)

coop

08-24-2007, 12:26 AM

^^ that is the same board/mod I'm using but with water cooling. http://img170.imageshack.us/img170/4678/1459937bky5.jpg (http://imageshack.us)

luihed

08-24-2007, 04:03 PM

Nice run guys... congrats coop on breaking 13m :) ...

over@locker886

08-26-2007, 03:26 PM

quick test with P35

http://img487.imageshack.us/img487/9086/32m12min2250sqc9.jpg

coop

08-26-2007, 11:43 PM

^^ Damn nice fsb.

over@locker886

08-30-2007, 07:05 AM

^^ Damn nice fsb.

Thanks, Vapo LS was on CPU:D

toddm27

08-31-2007, 08:36 AM

here's a tweaked run with my e6850 :D
p5k vanilla ballistix 8500

http://img130.imageshack.us/img130/7218/32goodnessgv0.png

Gautam

08-31-2007, 09:25 AM

You've wandered into my turf now. . ;)

gprhellas

09-01-2007, 08:16 AM

M/B Asus Blitz Formula (no mod)
Vcore 1,72Volt
CPU Cooling ln2 (-100) on Gorillakos POT rev.1.03
CPU Core2 E6700 (L633A549)-(Thanks Tanaka-san)
Memory TeamXtreem 1200 C5 (2,66Volt)
VFSB 1.4Volt
NB 1.55Volt
SB 1.175Volt
CPU PLL AUTO
OS: WIN XP32
Copy-waza 1GB
MaxMem 640MB

http://i164.photobucket.com/albums/u10/gprhellas/Team%20Group/3600_32M_12-51-5_gpr.jpg

Sorry my friend Tanaka-san and Hipro-san.
I am sure the next one of you, will be better....:up:

Gautam

09-01-2007, 09:09 AM

:clap:

gprhellas

09-05-2007, 11:09 PM

M/B Asus Blitz Formula (Vcore mod only) (tsan's)
Vcore 1,78Volt
CPU Cooling ln2 (-100) on Gorillakos POT rev.1.03
CPU Core2 E6700 (L633A549)
Memory TeamXtreem 1200 C5 (2,71Volt)
VFSB 1.48Volt
NB 1.64Volt
SB 1.2Volt
CPU PLL 2Volt (max bios)
OS: WIN XP32
Copy-waza 1GB
MaxMem 640MB

http://i164.photobucket.com/albums/u10/gprhellas/temp_links/32M_3600_gpr_12-51-078.jpg

DEVIL K-ce

09-10-2007, 01:41 AM

Mine first in benching life 32M :p: Not tweaked, only waza and maxmem 500. Mem can do the same clocks with level 7 but not much time to next run.

Blitz Formula
Ballistix 800
Dual stage cascade
FSB wall at 540MHz :rofl:
Result on strap 333MHz.

http://images23.fotosik.pl/78/afbfa5813c88d5b6.jpg (www.fotosik.pl)

Martin :)

hipro5

09-17-2007, 09:40 AM

DDR3 PURE POWER...... :D :p:

ASUS Blitz Extreme.....CellShock DDR3 PC14400 Ram Modules.....:)

http://www.hipro-tech.com/images/hipro5/ASUS_Blitz_Extreme/Super_Pi_32M_12.45.282_3602_515fsb_1029rams_1.png

http://www.hipro-tech.com/images/hipro5/ASUS_Blitz_Extreme/Super_Pi_32M_12.45.282_3602_515fsb_1029rams_2.png

http://www.hipro-tech.com/images/hipro5/ASUS_Blitz_Extreme/Super_Pi_32M_12.45.282_3602_515fsb_1029rams_3.png

eva2000

09-17-2007, 09:51 AM

woah man that destroyed nearly everything :D

vdimm used ?

gprhellas

09-17-2007, 10:02 AM

Respect to my teacher…..:clap:

Gautam

09-17-2007, 10:09 AM

Now THIS is how DDR3 is meant to be run. :clap:

hipro5

09-17-2007, 10:12 AM

Thanks guys..... :D

Vdimm and compare = HERE....... (http://www.xtremesystems.org/forums/showthread.php?t=159190) :)

krullet

09-18-2007, 04:36 PM

here are a few results from me, really sucky cpu clock, but im just testing some tweaks and subtimings,

im going to change to x6800 tomorrow and run with fsb500 and mem over 600 and hope for a good time :D

here it is a 3ghz 32M time with low FSB

VMEM: 2.55v

http://aycu06.webshots.com/image/25885/2000557877595778600_rs.jpg (http://allyoucanupload.webshots.com/v/2000557877595778600)

i have one more result with higher FSB and another CPU

http://aycu35.webshots.com/image/28114/2005582400317621681_rs.jpg (http://allyoucanupload.webshots.com/v/2005582400317621681)

Misko

09-20-2007, 05:32 AM

Finally we got memory which can work divided :) (2:3), not only synchro (514x7). Results:

http://img215.imageshack.us/img215/3679/screenshot038copynx8.png

http://img76.imageshack.us/img76/4664/screenshot043copyzk1.png

pius

09-22-2007, 08:30 PM

HI everyone , i am a new member here
I want to share my result to you
12m 06s @ SuperPI 32M @ 4GHz

Thanks OnePagebook , Everything about SuperPi Tweak , i learned from Him

http://xs319.xs.to/xs319/07380/4G.JPG

pius

09-22-2007, 08:35 PM

11.xx Entry
4050MHz、11m 57s
http://xs119.xs.to/xs119/07380/4050.JPG

elmor

09-26-2007, 02:19 PM

Another entry with help from OPB.

http://bandwidth.se/imgs/nouser/3ghz14m5974d9dfae8.jpg

eva2000

09-28-2007, 12:36 AM

Finally broke sub 12min at <4000Mhz !

11m 59.656s @3996.7Mhz = 2864259.04 efficency :)

Used Maxmem = 615 with my custom fresh WinXP Pro SP2 nLite install (http://i4memory.com/showthread.php?t=4736) :D

http://fileshosts.com/intel/DFI/DFI_P35T2R/results/scytheinfinity/E6850_L723A347_1/crucial/ballistix/8500t_2/9x/667/EDT_Turbo_EA_fast_T2auto_444-555_4445_A-23-plA-A-A-10-10-454-AA_1.525-A-2.38-1.217-1.55-1.57-1.3_clk_current/spi32m_11s59s656ms_maxme615.png

http://fileshosts.com/intel/DFI/DFI_P35T2R/results/scytheinfinity/E6850_L723A347_1/crucial/ballistix/8500t_2/9x/667/EDT_Turbo_EA_fast_T2auto_444-555_4445_A-23-plA-A-A-10-10-454-AA_1.525-A-2.38-1.217-1.55-1.57-1.3_clk_current/everest-bandwidth.png

hipro5

09-28-2007, 04:22 AM

eva2000

09-28-2007, 04:24 AM

Finally I think it's time for you to move to DDR3...... ;) :p:
not much use right now when my DDR3 Blitz Extreme is limited to 485-493FSB for cpus that can do 530FSB on Blitz Formula/Commando hehe

DDR3 needs high FSB capable cpus to really shine!

over@locker886

10-01-2007, 03:21 AM

http://img299.imageshack.us/img299/2033/sub13de4.jpg

3oh6

10-02-2007, 08:30 AM

i thought i had my 32M SPi OS down to be as good as anyone but clearly i have a good couple seconds worth of work to do. time to start from scratch and try to find those last couple of seconds. my hats off to BA and gandalfone. all three of us with the same setups pretty much but they are clearly better than me at this point :up:

E6600 (L629B383) 7 x 510 (boot from bios)
Thermalright Ultra-120 (CPU cooling)
Asus P5K3-Dlx (stock cooling, thermal paste hasn't even been changed)
Crucial Ballistix PC3-12800 2x1GB - the star of the show
Biostar 8600GTS 512MB
Seagate 7200.9 80GB SATA2 (20GB partition for OS/programs/page file)
Silverstone Zeus ST56ZF 560W
Win2K3 SP1 (custom nLite'nd job)

realtime / core 1
maxmem = 615
copywazza = 750MB (single folder w/750x1MB files in individual folders) from C:\ > Z:\ - Z:\ > C:\ - C:\ > Z:\
eram 2.11 (Z:\) - about 1GB in size running SPi

visual effects all off
memory usage = "System cache"
processor scheduling = "Programs"
page file = Custom (Init - 512MB Max - 512MB)
plenty of services disabled but not all

reg tweaks:
"EnableSuperfetch"=dword:00000001
"DisablePagingExecutive"=dword:00000001
"LargeSystemCache"=dword:00000001
"ClearPageFileAtShutdown"=dword:00000001
(there may be a couple more of the NTFS reg tweaks in there as well)

3570.0MHz SPi 32M = 12m 59.984s
click for full size including memset...
http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/510x7_850_765x_32m-1sm.png (http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/510x7_850_765x_32m-1.png)

eva2000

10-03-2007, 09:20 AM

Just when I caught up to your previous 12m 53.9xx run lol

System:

Intel Core 2 Duo E6600 L709A958
Corsair Nautilus 500 H20
Asus P5K3 Deluxe 0604 official bios
128MB Gainward FX5200 PCI
2x1GB Crucial Ballistix PC3-12800 (http://i4memory.com/showthread.php?t=4782) DDR3-1600 8-8-8-20 at 1.8v rated dual channel kit
74GB WD Raptor 8MB
LiteOn 165H DVD Burner
Sony FDD
1KW PCP%C SLI PSU
WinXP Pro SP2 Luna Royale Blue themed with nLite + RyanVM updates

7x514FSB 3:5 856Mhz 7-6-5-15 1T at 2.00v bios set
I finally broke the sub 13min Super Pi 32M barrier at <3600Mhz and when I mean broke, I mean I slashed 8.25 seconds of my previous personal time of 13min 02.094s (http://fileshosts.com/intel/Asus/P5K3_Deluxe/results/Nautilus500/E6600_L709A958/crucial/12800/8x/1_2/450-900_76518_3-48-10-55_1t_1.5-1.3-1.55-2.0-1.2_x67_sron/spi32m_13m02s094ms.png)! :D

I needed 2.0v vdimm as 1.95v vdimm resulted in memtest86+ v1.70 errors (4 errors at test #5 looping).

How's 12m 53.844s for 32M with WinXP Pro SP2 fully updated with no maxmem tweaks at all!

http://fileshosts.com/intel/Asus/P5K3_Deluxe/results/Nautilus500/E6600_L709A958/crucial/12800/7x/3_5/514-856_76515_448444_1t_1.5125-1.4-1.7-2.0_x67_srswoff_tblvl1_oc1v/spi32m_12m53s844ms_full.png (http://fileshosts.com/intel/Asus/P5K3_Deluxe/results/Nautilus500/E6600_L709A958/crucial/12800/7x/3_5/514-856_76515_448444_1t_1.5125-1.4-1.7-2.0_x67_srswoff_tblvl1_oc1v/spi32m_12m53s844ms_full_tn.png)

http://fileshosts.com/intel/Asus/P5K3_Deluxe/results/Nautilus500/E6600_L709A958/crucial/12800/7x/3_5/514-856_76515_448444_1t_1.5125-1.4-1.7-2.0_x67_srswoff_tblvl1_oc1v/everest_bandwidth.png

Now I wonder if I can go sub 12m 50s for 32M at <3600Mhz ? :)

eva2000

10-03-2007, 09:37 AM

For now set RAS to CAS Write delay in memset from 6 to 3 and squeezed out 0.906 seconds faster 32M time :D

http://fileshosts.com/intel/Asus/P5K3_Deluxe/results/Nautilus500/E6600_L709A958/crucial/12800/7x/3_5/514-856_76515_448444_1t_1.5125-1.4-1.7-2.0_x67_srswoff_tblvl1_oc1v/spi32m_12m52s938ms_memset.png

hipro5

10-03-2007, 09:49 AM

For now set RAS to CAS Write delay in memset from 6 to 3 and squeezed out 0.906 seconds faster 32M time :D

You see!.....I told you to go to DDR3..... ;) :D :p:

3oh6

10-03-2007, 09:51 AM

For now set RAS to CAS Write delay in memset from 6 to 3 and squeezed out 0.906 seconds faster 32M time :D
now do it properly and go for 509*7 under 13m...you should be mighty close if not already there. i expect an update in 12min 59sec ;)

eva2000

10-03-2007, 10:56 AM

You see!.....I told you to go to DDR3..... ;) :D :p: yeah DDR3 helped for sure :D

now do it properly and go for 509*7 under 13m...you should be mighty close if not already there. i expect an update in 12min 59sec ;)something to aim for I guess :D

dinos22

10-03-2007, 05:40 PM

nice work george

3oh6

10-07-2007, 01:00 AM

dusted off the phase this afternoon and went straight for the sub 11min category. there is still plenty of time left to shave off with this setup. i couldn't get 550*8 to run with the 3:5 ratio (200 strap) for 913MHz so i had to settle for the 5:8 (333 strap) and 875MHz. on top of that...my P5K3-Dlx won't be running 550FSB PL7 until it receives some 'help' so PL8 would have to do for now. be sure that i will be back in this category after some mods at PL7 ;)

E6600 (L629B383) 8 x 547 (boot from bios)
Chilly1 SS (CPU cooling)
Asus P5K3-Dlx (stock cooling, thermal paste hasn't even been changed)
Crucial Ballistix PC3-12800 2x1GB - the star of the show
Biostar 8600GTS 512MB
Seagate 7200.9 80GB SATA2 (20GB partition for OS/programs/page file)
Silverstone Zeus ST56ZF 560W
Win2K3 SP1 (custom nLite'nd job)

realtime / core 1
maxmem = 615
copywazza = 1GB (single folder w/10XXx1MB files in individual folders) from C:\ > Z:\ - Z:\ > C:\ - C:\ > Z:\
eram 2.11 (Z:\) - about 1.1GB in size running SPi

visual effects all off
memory usage = "System cache"
processor scheduling = "Programs"
page file = Custom (Init - 1024MB Max - 1024MB)
plenty of services disabled but not all

reg tweaks:
"EnableSuperfetch"=dword:00000001
"DisablePagingExecutive"=dword:00000001
"LargeSystemCache"=dword:00000001
"ClearPageFileAtShutdown"=dword:00000001
(there may be a couple more of the NTFS reg tweaks in there as well)

4375.6MHz SPi 32M = 10m 59.422s
click for full size including memset...
http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/547x8_875_765x_32m-1sm.png (http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/547x8_875_765x_32m-1.png)

over@locker886

10-07-2007, 04:04 AM

dinos22

10-08-2007, 07:29 AM

dinos22

10-09-2007, 08:19 PM

improved my 12.xx time a little :) :D

http://img406.imageshack.us/img406/3538/36ghz32msuperpi61750mhzsm8.png

i am VERY CLOSE to a nice 9.xx category entry :D (CPU FSB is preventing me from clocking higher so i will have to tweak out those last few seconds :D)

http://img403.imageshack.us/img403/5971/4891mhz32msuperpi171vsshj5.png

eva2000

10-09-2007, 11:50 PM

Good stuff dinos :D

my fastest sub 12min time to date @3959.9Mhz :D

http://fileshosts.com/intel/Asus/P5K3_Deluxe/results/Nautilus500/E6850_L723A347_2/crucial/pc3_12800/8x/autofsb/3_5/500_825_76515_448444_1t_1.6-1.4-1.7-2.0-1.2_srswoff_tb1_oc10mv/spi32m_11m59s906ms.png

dinos22

10-10-2007, 12:39 AM

nice going there george

i will give you a run for your money on Gigabyte with 650+ on RAM for 11.xx category :D

Gautam

10-10-2007, 09:05 AM

was just studying Gautam's runs and it is very interesting to see how big the CPU MHz gaps start to emerge as you push into categories past sub 13m :)

http://img231.imageshack.us/img231/4114/clipboard011rn3.png

we are talking about ~550-580MHz difference for 9.xx category and probably 650Mhz for 8.xx category :shocked: wow

it would be so nice if someone smarter or less lazy than me could figure out the efficiency formula that has no bias :( so we can compare relative performance on any clock

Yep, since its inverse proportional, you'll always need more and more MHz for the same absolute time difference. I don't think there's any way to have such a formula. We can compare efficiencies at a given set multiplier/ratio/timings, but once those variables are changed, the efficiency will as well. When I was doing those runs I usually eyeballed efficiencies at the next multiplier step by adding the difference in performance product between the previous two, but that turns out to be too optimistic and is better for nothing but a rough rough estimate.

You guys are all making me damned jealous, nice to see all this action going on. Love seeing 3ho6 right at the 59.984 mark for 12.xx--that's the sign of a totally squeezed setup. :D I wish I had the time to do 32m runs on P35, you'd crap if you saw the kind of mem speeds I was seeing. :p: DDR3 is def where its at now tho...keep defending DDR2's honor nonetheless dinos. ;)

idiot1234556

10-11-2007, 03:53 AM

hello, i'm newbie here..this is my result

http://i242.photobucket.com/albums/ff219/idiot1234556/32M15m.png

http://valid.x86-secret.com/show_oc.php?id=251660

Zeus

10-11-2007, 04:13 AM

Yep, since its inverse proportional, you'll always need more and more MHz for the same absolute time difference. I don't think there's any way to have such a formula. We can compare efficiencies at a given set multiplier/ratio/timings, but once those variables are changed, the efficiency will as well. When I was doing those runs I usually eyeballed efficiencies at the next multiplier step by adding the difference in performance product between the previous two, but that turns out to be too optimistic and is better for nothing but a rough rough estimate.

You guys are all making me damned jealous, nice to see all this action going on. Love seeing 3ho6 right at the 59.984 mark for 12.xx--that's the sign of a totally squeezed setup. :D I wish I had the time to do 32m runs on P35, you'd crap if you saw the kind of mem speeds I was seeing. :p: DDR3 is def where its at now tho...keep defending DDR2's honor nonetheless dinos. ;)

Hey Gautam,

Give us a taste of what rediculous memspeeds you're looking at atm, please?

before

10-11-2007, 08:15 AM

http://img209.imageshack.us/img209/9227/e6700spi32m9m56984zk8.png

Here's my humble contribution for the 9.xx club. Did it this afternoon while testing the cascade. Guess it could be faster; but it's not a too bad one actually. :)

Gautam

10-11-2007, 09:54 AM

Hey Gautam,

Give us a taste of what rediculous memspeeds you're looking at atm, please?

Was looking at is appropriate...all I have saved from about a month ago is this (http://www-personal.umich.edu/~gautamb/the_own.JPG). :-/ Bear in mind that 05 is quite a bit harder to pass than 32M, I was around 675 5-5-4 and 660 give or take 5-4-4 but both of them were lacking in perf so I didn't bother with them and didn't take screenies...now that I think about it it would've looked nice. :p: 1M was around 700 5-5-5 in dual channel. Of course voltage was about 2.8v for everything. Right now I have nothing but a couple of sets of ram, a video card, a hard drive and a psu. No CPU or mobo. :D

Gautam

10-11-2007, 09:58 AM

dinos22

10-12-2007, 12:38 AM

determined here to open up a 8.xx category

fingers crossed if everything works out to plan on Atomic Live our team will have a nice little time for some droolage action....my E6700 can do the clocks we need :D:D:D:D:D:D: :eek: :D:up:, got plenty of capable mobos and RAM so just luck necessary now

more to come soon fellas :up:

Zeus

10-12-2007, 02:07 AM

What do you reckon it takes on your E6700? At least 5.5GHz i'd say with 600 on the rams or am i wrong?

dinos22

10-12-2007, 02:27 AM

What do you reckon it takes on your E6700? At least 5.5GHz i'd say with 600 on the rams or am i wrong?

we'll be running DDR3 ;)

with ddr2 probably ~5500-5550 with 5:6 ratio and my dominators would smoke the 32M run

fredyama

10-13-2007, 07:33 AM

12m50.047s--My first DDR3 run @3.6G:)

(Set up)
M/B: ASUS P5E3 Deluxe 79M0AIF16*** (Bios 0402, No Mod)
M/B Bed: V-TEC ARC Bed Rev.5.0 PRO by Vigor
CPU: Core 2 Extreme X6800 L629B800/2L638013/A10**
CPU Cooling: Air Scythe Infinity + Delta TFB1212GHE x 1
Chipset Cooling: Normal
Memory: CellShock DDR3-1800 1GB x 2
VGA: ATI 3D Rage PCI 8MB
HDD: Hitachi HDS722540VLAT20 PATA 41.1GB
Power Supply: OCZ PowerStream 520W
Vcore: 1.50V, Vdimm: 2.20V, Vnb: 1.71, Vsb: 1.20V, Vfsb: 1.5V, Vcpu pll: 1.76V, Vio: 3.556V --> all in Bios setting
OS: Windows Server 2003
MEM: 5:8 1T, Bios setting: 6-5-5-12-5-48-7-5, Sec Inf: all Auto, -A-A
Others: FSB514@boot, SetFsb2.0.b.16h, MemSet3.4beta2, ERAM2.11, AutoGear, Copy-Waza, MAXMEM=600, OCZ Ultra5+

http://premium1.uploadit.org/fredyama//P5E3Dlx-X6800L-Air-FSB514-CellShock1800-32M-3.6G-12m50.047s.gif

eva2000

10-13-2007, 07:46 AM

nice... already beaten my 12m 51s run at 7x514FSB LOL

over@locker886

10-14-2007, 01:06 AM

my new personal record at 3600Mhz.. DDR2 alive:)

http://img296.imageshack.us/img296/725/360032m1fh5.jpg

Fredyama:very good first run:clap:

bachus_anonym

10-15-2007, 09:16 PM

Heya,

Great submissions eva2000, 3oh6 :up: Although not exactly fitting the rules :p: but fredyama and hipro5 have some sweet times at 3.6GHz!!! Toasty 2.36v on DDR3 George :) Also, very nice CAS4 on 10000C5DF, dinos :yepp: I'm personally looking forward to even more DDR3 results, though.

BTW, can still play with you guys? It's been almost 4 months since I had a moment to sit down and cook up another result. I finally got around to doing it and managed to raise the bar a little higher :) Let's get some competition going, right?

12:xx

Corsair Dominator TWIN3X2048-1800C7DF @ DDR3-2016 7-7-7-15, vdd=2.34v
Core 2 Duo E6850 @ 3528MHz
Asus P5E3 Deluxe, BIOS 0503
DRAM Command Rate - [1T]
DRAM Static Read Control - [Auto] --> effectively same as [Disabled]
AI Clock Twister - [Strong]
AI Transaction Booster - [Enabled 3]
"nothing special" standard WinXP Pro SP2 installation; Copy-Waza, Maxmem=600
all set in BIOS, straight boot to Win, no changes done with Memset, SetFSB, etc.

http://www.clockmehigh.com/TestingAtCorsair/MicronDDR3/504x7_DDR3-2016_7-7-7-15_Micron2GB_234v_SPi32M_LCC_8x5.gif (http://www.clockmehigh.com/TestingAtCorsair/MicronDDR3/504x7_DDR3-2016_7-7-7-15_Micron2GB_234v_SPi32M_LCC.gif)

Note: CPU-Z 1.41 seems to have a problem correctly reporting memory frequency on this motherboard. But FELIX's Memset as well as Everest Ultimate get it right. However, the former shows Command Rate as 2T when BIOS sets it at 1T.

Thanks a lot for giving me a chance to submit another score, guys!
:toast:

eva2000

10-15-2007, 09:19 PM

woah bachus @3528mhz!

rick_fx

10-15-2007, 09:34 PM

Wow Bachus, very fast 32M :up:

Gautam

10-15-2007, 09:46 PM

Damn, screw the Pi time...check out the RAM....1000 7-7-7 :eek:

Let's get some competition going, right?

Get the prices down to the point of sanity and maybe we will. ;)

dinos22

10-15-2007, 10:04 PM

Heya, Also, very nice CAS4 on 10000C5DF, dinos :yepp: I'm personally looking forward to even more DDR3 results, though.

holy smokes man killer run
thanks for the compliments :up:

i am squeezing the last bit of life out of the DDR2 gear before i move onto some serious DDR3 benching very soon :up:

it's awesome to see what these DDR3 sticks can do and having RAM clocking that high also helps a lot with lower multi chips and will make even more drastic differences with LN2 benching as most guys are going 1:1 so RAM is not maxed out properly......

this Saturday i've got a big event and some LN2 .....we'll have 6x different rigs setup for the OC show but only a couple of extreme clocking ones :)

it should be a lot of fun and i'll certainly work on the 8.xx category a little ;) :D

those sticks are on fire
someone call the fire department :D:D:D:D:D

3oh6

10-15-2007, 10:11 PM

You guys are all making me damned jealous, nice to see all this action going on. Love seeing 3ho6 right at the 59.984 mark for 12.xx--that's the sign of a totally squeezed setup. :D
you know it...if it isn't in there by a hair, it isn't trying ;)

Great submissions eva2000, 3oh6 :up: Although not exactly fitting the rules :p: but fredyama and hipro5 have some sweet times at 3.6GHz!!! Toasty 2.36v on DDR3 George :)
thanks man and great to see you setting the bar in this thread again. you beat me to the punch though with the 1000MHz+ runs. i just happened to be working on my 12.XX run but i am definitely not at 7-7-7 or 500FSB at PL6 but i am also not at 2.34v, these sticks are my only set so i gotta make sure they last...hopefully soon i get some more to play with. absolutely sick memory and MB. this DDR3 sure is fun to play with isn't it?

i thought i was doing good getting the 12.XX category feasible at 3550MHz...apparently not thanks to BA :up:

**removed image...a couple posts down i replaced with a real run :)

bachus_anonym

10-15-2007, 11:06 PM

woah bachus @3528mhz!
Wow Bachus, very fast 32M :up:
Damn, screw the Pi time...check out the RAM....1000 7-7-7 :eek:
holy smokes man killer runThanks guys!
Get the prices down to the point of sanity and maybe we will. ;)Too many factors out there determining the price end-user will pay but cost of Micron's 1Gbit DDR3 is still the most significant chunk of cash that goes in it...

@ dinos

Yeah man, I've seen you cranking some serious clocks lately, on DDR2/DDR3 as well as CPUs! Great stuff! I'm looking forward to seeing you break into 8:xx. I also need to get back to some more serious overclocking, although single stage is not cutting it anymore, haha, and since I started this job I somehow just can't find enough spare time...

thanks man and great to see you setting the bar in this thread again. you beat me to the punch though with the 1000MHz+ runs. i just happened to be working on my 12.XX run but i am definitely not at 7-7-7 or 500FSB at PL6 but i am also not at 2.34v, these sticks are my only set so i gotta make sure they last...hopefully soon i get some more to play with. absolutely sick memory and MB. this DDR3 sure is fun to play with isn't it?

i thought i was doing good getting the 12.XX category feasible at 3550MHz...apparently not thanks to BA :up: not quite there but no ERAM, no maxmem, memory still hasn't been tweaked, and the OS is my benchmarking OS, not my 32M benching OS. another free afternoon and i will have a 12.XX time at >3550MHz:

http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/507x7_1014_876x_32m-1.png
Damn man, that's very impressive run!!! I thought I could be safe for a moment at 3528MHz but I guess I need to start working on a backup score now :lol: :up:

Let's keep this thread alive, it's a lot of fun :toast:

dinos22

10-15-2007, 11:19 PM

Yeah man, I've seen you cranking some serious clocks lately, on DDR2/DDR3 as well as CPUs! Great stuff! I'm looking forward to seeing you break into 8:xx. I also need to get back to some more serious overclocking, although single stage is not cutting it anymore, haha, and since I started this job I somehow just can't find enough spare time...

i heard about your work ethic there man....lol they better reward you with a nice cascade :D:D:D:D :up:

dinos22

10-15-2007, 11:23 PM

damn 3oh6
such low vdimm at those clock
new crucials are rocking as well :) wow

i noticed those sticks have the new Intel XMP SPD as well :)

3oh6

10-16-2007, 10:52 AM

damn 3oh6
such low vdimm at those clock
new crucials are rocking as well :) wow

i noticed those sticks have the new Intel XMP SPD as well :)
these sticks seem to get better the more i beat on them. i am certainly impressed with how they are holding up to the big boys that BA is running. normally i don't openly plug reviews like this but since a few people have been asking me what 24/7 stability of this particular kit is like, you can see some stability testing in my review (http://overclockersonline.net/?page=articles&num=1381) of these exact modules that i am beating on here. a dual 32M OC Report will be out in a couple weeks on these sticks...still finding the limits of the MB at this point. now on to the matter at hand...

i have almost evened up the playing field, still not ready to go over 2.0v with my babies yet so CL7 is out of the question at this frequency and my MB still says P35 in the description instead of that yucky X38 suff, but i did spend a couple minutes with a 50K ohm VR and the P5K3 to get that PL down to 6 at this FSB :D

you better find some free time next week because here i come BA :up:

i believe in full disclosure so here is a pic of the mod...thanks to SF3D and his P5K-Dlx vmod thread (http://www.xtremesystems.org/forums/showthread.php?t=145142) (the MCH mod is the same for P5K3 obviously)
http://img.photobucket.com/albums/v220/3oh6/o2/p5k3_vmch-1.jpg

back on my 32M prepped OS so a similiar setup to previous runs of late:

E6600 (L629B383) 7 x 505 (boot from bios)
Thermalright Ultra-120 (CPU cooling)
Asus P5K3-Dlx (vMCH mod)
Noctua NC-U6 NB cooling / Thermalright HR-05 SLI SB cooling / naked PWM :cool:
Crucial Ballistix PC3-12800 2x1GB
Biostar 8600GTS 512MB
Seagate 7200.9 80GB SATA2 (20GB partition for OS/programs/page file)
Silverstone Zeus ST56ZF 560W
Win2K3 SP1 (custom nLite'nd job)

realtime / core 1
maxmem = 615
copywazza = 1GB (single folder with 1MB files each in an individual folder) from C:\ > Z:\ - Z:\ > C:\ - C:\ > Z:\
eram 2.11 (Z:\) - about 1.3GB in size running SPi
and i think...i think...a dash of CDT as far as i understand it

visual effects all off
memory usage = "System cache"
processor scheduling = "Programs"
page file = no page file (still a page file i think but i set it to none)
plenty of services disabled but not all

reg tweaks:
"EnableSuperfetch"=dword:00000001
"DisablePagingExecutive"=dword:00000001
"LargeSystemCache"=dword:00000001
"ClearPageFileAtShutdown"=dword:00000001
(there may be a couple more of the NTFS reg tweaks in there as well)

3535.1MHz SPi 32M = 12m 59.953s
click for full size including memset...
http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/505x7_1010_876x_32m-1sm.png (http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/505x7_1010_876x_32m-1.png)

not quite as tight as the last one Gautam, but i tried, just for you ;)

Gautam

10-16-2007, 05:00 PM

@bachus, I know, I know, was just kidding.

@3oh6-seems like it could've been .2MHz lower...keep trying :rofl:

dinos22

10-16-2007, 05:07 PM

that PL mod is interesting

what chip would i look for on other motherboards to do the same thing

say Gigabyte P35 or X38 ones for example????

Gautam

10-16-2007, 05:16 PM

That's a vmch mod...

dinos22

10-16-2007, 05:18 PM

That's a vmch mod...

aHHHH cool

nothing that a bit of dice won't fix with max volts on X38 then :D

3oh6

10-16-2007, 06:18 PM

That's a vmch mod...
yeah, the P5K3 is a bit crippled with just 1.70v as the max voltage selectable from BIOS. without a little more juice, PL6 at 500FSB was a pipe dream for my board...instant lockup. 500FSB PL6 1:2 was so much further away from a pipe dream. with 1.95v now, i ran 32M at PL6 1:2 for damn near 4 hours straight with the Noctua NC-U6 for cooling so rock solid.

i still haven't had time for testing but i hope that the new found MCH voltage helps get me over the 940MHz dual 32M wall i found. otherwise the OC report of this Ballistix kit will have to focus on tight timings where it doesn't really excel.

GemmyBTL

10-24-2007, 01:16 PM

My first run. 12.xx Category
CB Tracer 8500 2.8V
http://breakthelimits.org/FTP/Gemmy/lowXSv1%20kopia.png

sonicsallen

10-24-2007, 06:04 PM

So close:(
http://img406.imageshack.us/img406/451/4994x812mpc7.jpg

3oh6

10-30-2007, 02:47 AM

it looks like Coop hasn't been around in a while...does that mean the death of this thread? "say it ain't so Joe..."

playing with the new kid on my block:

E6850 (L724A479) 8 x 490 (boot at 501 SetFSB down...don't ask why, i don't understand it yet)
Thermalright Ultra-120 (CPU cooling)
Asus P5K3-Dlx (vMCH mod)
Noctua NC-U6 NB cooling / Thermalright HR-05 SLI SB cooling / naked PWM :cool:
Crucial Ballistix PC3-12800 2x1GB
Biostar 8600GTS 512MB
Seagate 7200.9 80GB SATA2 (20GB partition for OS/programs/page file)
Silverstone Zeus ST56ZF 560W
WinXP Pro SP2 (custom nLite'nd job)

realtime / core 1
maxmem = 615
copywazza = 1GB (single folder with 1MB files each in an individual folder)
from C:\ > C:\Documents & Settings x 3

visual effects all off
memory usage = "System cache"
processor scheduling = "Programs"
page file = no page file (still a page file i think but i set it to none)
plenty of services disabled but not all

reg tweaks:
"EnableSuperfetch"=dword:00000001
"DisablePagingExecutive"=dword:00000001
"LargeSystemCache"=dword:00000001
"ClearPageFileAtShutdown"=dword:00000001
(there may be a couple more of the NTFS reg tweaks in there as well)

3920.2MHz SPi 32M = 11m 59.875s
click for full size including memset...
http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/490x8_980_876x_32m-1sm.png (http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/490x8_980_876x_32m-1.png)

Zeus

10-30-2007, 12:00 PM

Can't believe what a struggle it was but i finally got sub 13 minutes at 3.6GHz.

I must be one of the very last to achieve this but i finally acomplished my target.

I have been concentrating on 965 board results way too long, ignoring the fact i have a P35 chipset based board.

This might look similar but i found out the hard way they're not.

On 965 boards one could get sub 13 min at 3.6Ghz with just 400MHz FSB and a 2:3 divider to set mem to 600MHz.

For too long i've been thinking that this was possible on a P35 board too, how wrong i was!!

I just didn't understand that changing my timings and subtimings didn't give any gain in SuperPi, then i suddenly dawned on me that i was starved for FSB!

After crancking up my FSB and lowering my multi, i found that i gained a hell of a lot, so i needed ram that could do real high frequenty's so i rolled the dice and got me two sticks of Crucial Ballistix PC8500.

These didn't let me down, heck, they even do 1M at DDR 1200 4-4-4. :)

So back to the drawing board, first untweaked run brought 13 min 6 seconds, next was what i was looking for:

http://img.photobucket.com/albums/v620/Z3us/screenshots/sub13.jpg

I think i can better this with some finetuning but hey, the result is there!

Geez, can't remember the last time i typed such a long post, i'm exited!! :D

massman

10-30-2007, 12:45 PM

Finally some 'decent' times on a 2MB chippie. No windows tweaks, just experimenting with copy-waza and CDT.

http://i154.photobucket.com/albums/s261/Massman-/1359891.jpg

Zeus

11-01-2007, 03:11 PM

Hey massman, keep in mind, 2mb chips are only 3-4 seconds slower in 32M than 4mb chips.

If you don't believe me, check out this thread, a lot of pages back. ;)

massman

11-01-2007, 03:18 PM

Hey massman, keep in mind, 2mb chips are only 3-4 seconds slower in 32M than 4mb chips.

If you don't believe me, check out this thread, a lot of pages back. ;)

That's why I used these: ' ' :)

Zeus

11-01-2007, 03:26 PM

That's why I used these: ' ' :)

;) got ya.

Study CDT tweak and you won't have to use those again. :)

massman

11-02-2007, 02:46 AM

CDT + windows tweaks ;)

dinos22

11-09-2007, 03:55 AM

man this thread's been so popular it's hard to keep up with all the updates

shame that there is no automatic way of updating like HWBOT type thread

actually massman

it would be interesting if HWBOT promoted efficiency and this type of format can be adopted by HWBOT

it will make people really think seriously about this kind of stuff

creating time categories would be so great for hwbot :D

so you guys take Yorkfield entries :D

got a sub 10m 4.8GHz run here hehehehe and that's with DDR2 still and just simple tweaks

http://img232.imageshack.us/img232/8880/32msuperpi9m53500s4818mcn6.png

Misko

11-09-2007, 05:52 AM

One core is because we were chasing 1M at ln2, then just for fun try 32M@3.6ghz and result is interesting:

http://img62.imageshack.us/img62/9139/32m1254344s3600mhzzs7.png

massman

11-09-2007, 05:56 AM

shame that there is no automatic way of updating like HWBOT type thread

actually massman

it would be interesting if HWBOT promoted efficiency and this type of format can be adopted by HWBOT

it will make people really think seriously about this kind of stuff

creating time categories would be so great for hwbot :D

so you guys take Yorkfield entries :D

So true, I'll talk to RB :)

before

11-09-2007, 06:00 AM

One core is because we were chasing 1M at ln2, then just for fun try 32M@3.6ghz and result is interesting:

http://img62.imageshack.us/img62/9139/32m1254344s3600mhzzs7.png

Very fast one indeed. :) P5K definitely looks very fast.

Misko

11-09-2007, 06:18 AM

Very fast one indeed. :) P5K definitely looks very fast.

yep for 1m DFI blood iron is awesome, for 32m asus for now is better. max fsb for both boards is over 650fsb:

Asus ln2

http://valid.x86-secret.com/show_oc.php?id=265798

and DFI on AIR :eek: :

http://valid.x86-secret.com/show_oc.php?id=264442

fast try (low volts) maybe on DFI 650 is possible with air (chilled) too.

dinos22

11-09-2007, 06:21 AM

crazy nice CPU

before

11-09-2007, 08:55 AM

M/B：ASUS P5B-Deluxe 1.03G P965C1 rev., Vcore, Vdroop, Vdimm, Vmch mods
CPU：Intel Core2 E6850 L725A
CPU cooling：2 Stage Cascade
Memory：Wintec PC2-8000 1024MBx2
VGA：Jaton 7600GS
HDD：Western Digital 80GB
Power Supply：Antec TP 550W
Vcore：1.72V(Bios)
Vdimm：2.61V(Actual)
FSB Termination Voltage：1.45V(Bios)
NB Voltage：1.71V(Actual)
OS：Windows Server 2003

http://img219.imageshack.us/img219/7218/e6850spi32m9m59328cq4.png

My P5B is starting to lose breath; it fails to boot 90% of times because of memory support.

Anyway, I think I've discovered better MCHBAR tweaks than those used for this run. I need to find the patience for trying again.

@Misko: Do you still have this DFI P965 of yours?

Misko

11-09-2007, 07:12 PM

@Misko: Do you still have this DFI P965 of yours?

Nope I'm on p5k vanilla now. why :) ?

before

11-10-2007, 01:57 AM

I would have pleased you to make some MCHBAR dumps in order to see how coded is the strap at high FSB's. :)

dinos22

11-11-2007, 12:56 AM

3920.2MHz SPi 32M = 11m 59.875s
click for full size including memset...
http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/490x8_980_876x_32m-1.png][img]http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/490x8_980_876x_32m-1sm.png

nice run mate :)

here is one of my runs from last night

the board is pretty slow but i managed to edge you out a little ;) :D

Big thanks to Corsair for some new sticks.....can't wait to get the DDR3 X38 board to REALLY give them a bash...this is just a warmup for now :D

3913MHz SPi 32M = 11m 59.828s

http://img164.imageshack.us/img164/5603/3913mhz32msuperpi894mhzlo7.png

Timbosan

11-11-2007, 02:52 AM

Heres my e6300 + P5B + Corsair 8500's. no tweaks :)

DJSUB

11-15-2007, 08:41 AM

small update :)

18m Timezone :

http://img206.imageshack.us/img206/771/spi32mlowclock18mkz1.png

19m Timezone :

http://img206.imageshack.us/img206/1614/spi32mlowclock19mgk0.png

3oh6

11-17-2007, 05:35 PM

this thread is not allowed to die...if Coop isn't going to maintain it, someone has to. i am pretty sure vBulletin doesn't allow it but i am volunteering to commandeer this thread and do the updates. if the powers that be can make that happen, i would be happy to take over. this thread is just to damn fun and helpful to let disappear.

now, back to the task at hand:

E6850 (L724A479) 8 x 542 (boot at 542)
Chilly 1 SS (CPU cooling)
Asus P5K3-Dlx (vMCH mod)
Noctua NC-U6 NB cooling / Thermalright HR-05 SLI SB cooling / naked PWM :cool:
Crucial Ballistix PC3-12800 2x1GB
Biostar 8600GTS 512MB
Seagate 7200.9 80GB SATA2 (20GB partition for OS/programs/page file)
Silverstone Zeus ST56ZF 560W
WinXP Pro SP2 (custom nLite'nd job)

realtime / core 1
maxmem = 615
copywazza = 7GB (single RAR file) from C:\ > D:\ x 1

visual effects all off
memory usage = "System cache"
processor scheduling = "Programs"
page file = D:\ = 512:512
plenty of services disabled but not all

4335.7MHz SPi 32M = 10m 59.234s
click for full size including memset...
http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/542x8_903_765x_32m-1sm.png (http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/542x8_903_765x_32m-1.png)

3oh6

11-17-2007, 10:59 PM

the board is pretty slow but i managed to edge you out a little ;) :D

Big thanks to Corsair for some new sticks.....can't wait to get the DDR3 X38 board to REALLY give them a bash...this is just a warmup for now :D

3913MHz SPi 32M = 11m 59.828s
http://img164.imageshack.us/img164/5603/3913mhz32msuperpi894mhzlo7.png
we can't have that now can we ;)

BTW, congrats on the disgusting day you put up over at the Bot...crazy front page beat down :up:

hopefully my Corsairs will come in sometime this week so the real fun can begin...although these Ballistix are definitely holding their own, just not at 7-6-5 :mad:

E6850 (L724A479) 7 x 557 (boot at 542)
Chilly 1 SS (CPU cooling)
Asus P5K3-Dlx (vMCH mod)
Noctua NC-U6 NB cooling / Thermalright HR-05 SLI SB cooling / naked PWM :cool:
Crucial Ballistix PC3-12800 2x1GB
Biostar 8600GTS 512MB
Seagate 7200.9 80GB SATA2 (20GB partition for OS/programs/page file)
Silverstone Zeus ST56ZF 560W
WinXP Pro SP2 (custom nLite'nd job)

realtime / core 1
maxmem = 615
copywazza = 7GB (single RAR file) from C:\ > D:\ x 1

visual effects all off
memory usage = "System cache"
processor scheduling = "Programs"
page file = D:\ = 512:512
plenty of services disabled but not all

3899.0MHz SPi 32M = 11m 59.890s
click for full size including memset...
http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/557x7_891_765x_32m-1sm.png (http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/557x7_891_765x_32m-1.png)

FELIX

11-18-2007, 12:46 AM

nice run mate :)

here is one of my runs from last night

the board is pretty slow but i managed to edge you out a little ;) :D

Big thanks to Corsair for some new sticks.....can't wait to get the DDR3 X38 board to REALLY give them a bash...this is just a warmup for now :D

3913MHz SPi 32M = 11m 59.828s

http://img164.imageshack.us/img164/5603/3913mhz32msuperpi894mhzlo7.png

...don't use beta1 version, tREF is bugged: "0" is not a normal value.
Otherwise, contrary to other timings, higher value is better for performance with this timing.

dinos22

11-18-2007, 12:50 AM

felix too lazy to change to later ones :shakes: :D

Jody thanks man you are killing me here :ROTF: :D

btw next week look out for some monster superpi runs :D

3oh6

11-18-2007, 09:13 AM

Jody thanks man you are killing me here :ROTF: :D

btw next week look out for some monster superpi runs :D
nice, i look forward to tasting what you are cooking.

i probably never would have ran 55x*7 until you showed us what it could do, so it was all your doing ;)

the funny thing is that i could be running that time block quicker. the P5K3 is a bit of an odd bird and has me scratching my head. the 3899MHz run is on the 333 strap at PL8 (PL7 will not run at these settings regardless of MCH voltage). on the 200 strap at PL7 3:5 giving slightly higher mem speed, i can run up to 560*8...but if i drop the multi to 7X at even 555FSB, i get errors in the first couple loops. no other changes, simply dropping multi provides instability but at 8X it runs 32M all day :confused:

Misko

11-21-2007, 04:08 AM

New run by Team Serbia:

http://img262.imageshack.us/img262/7365/32m36001250219sbw9.png

before

11-21-2007, 08:35 AM

Nice one Misko ;)

3oh6

11-21-2007, 11:43 PM

consider this my favorite 32M run at this point in time...

E6850 (L724A479) 9 x 538.5 (boot at 530)
ALU Rev2 Mousepot w/dry ice
Asus P5K3-Dlx (vMCH / vCORE mod)
Noctua NC-U6 NB cooling / Thermalright HR-05 SLI SB cooling / naked PWM :cool:
Crucial Ballistix PC3-12800 2x1GB
Biostar 8600GTS 512MB
Seagate 7200.9 80GB SATA2 (20GB partition for OS/programs/page file)
Silverstone Zeus ST56ZF 560W
WinXP Pro SP2 (custom nLite'nd job)

realtime / core 1
maxmem = 615
copywazza = 5.5GB (single RAR file) from C:\ > D:\ x 1

visual effects all off
memory usage = "System cache"
processor scheduling = "Programs"
page file = D:\ = 512:512
plenty of services disabled but not all

4846.8MHz SPi 32M = 9m 59.625s
click for full size including memset...
http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/538x9_897_765x_32m-1sm.png (http://img.photobucket.com/albums/v220/3oh6/xsforum/super_pi/538x9_897_765x_32m-1.png)