how can i get T1 stable HELP

[KaptainBlaZzed]

I have 2 x 512mb BH-5 and i need to get T1 stable.

DFI NF3 Ultra-D
2 x 512mb BH-5 + DDR booster
600 watt enermax
X2 3800+ @ 2.85

with the 166 divider my RAM runs at 237mhz (2-2-2-5) T2 with 3.2 volts, but i want it to run with T1. are there any settings that i could change so that i can achieve my goal, and raising the voltage does not help here.

Thanks.

http://kaptain.no-ip.org/images/64.jpg

[CanadianTSi]

You could try an Idle Cycle Limit of 256 and also a Tref of 0648 in the Bios which is which is 166mhz 15.6us in the tweaker

[HiJon89]

Trc to 7, Twr to 2, Twcl to 2, everything else looks alright.

[Gautam]

Whats probably hurting you the most are the Trfc at 12, should be at 15 or 16 usually for 2x512. Increase your Read Preamable to 7 or 7.5. The other suggestions should help you too.

Provided those all go well, increase R/W Queue Bypass to 16x Bypass Max to 7x for some more performance.

[HiJon89]

Trfc at <14 won't work with UTT, but with old-school BH-5/6 I've found that 12 works best.

[Gautam]

Ah, figured he had UTT for some reason, my mistake. I used 11 personally, but I had just 2x256. :-/