PDA

View Full Version : Best week for Gskill LE???

GoThr3k
10-19-2005, 03:06 AM
Hi,

I can buy some gskill LE 0431
is that any good
the ones i have now 0440 go pi 1M 290MHz
Supertim0r
10-19-2005, 09:37 AM
you should buy a DFI nF4...not new memory :p:
440 is probably one of the best week
|3ourne
10-19-2005, 11:19 AM
437 and 440 . I have a pair of both :D .
Zeus
10-19-2005, 12:08 PM
Week doesn't matter much, there's good and bad chips in each batch.
Owned a few kits with the holy 440, none of them was good.

Right now i have 507, this kit does 300 2,5-3-3-7 stable, unfortunately one of the rams broke. :(
Mr_Slinky
10-19-2005, 01:46 PM
Week doesn't matter much, there's good and bad chips in each batch.
Owned a few kits with the holy 440, none of them was good.

Right now i have 507, this kit does 300 2,5-3-3-7 stable, unfortunately one of the rams broke. :(
i smell an RMA or burned PCB
Zeus
10-19-2005, 02:06 PM
RMA--yes, burned pcb--no.
Very odd problem, i could run memtest 86 for 9 hours without a single error, and 1000% memtest in windows without errors.

Soon as i tried OCCT or Prime large FFT's it failed and it also gave random bsod's.

Testing one stick at a time showed that 1 stick even failed OCCT at 200MHz 2,5-3-3-7.

I didn't burn it, never ever gave it over 2.86V and always had a 80mm fan blowing over them.

Conclusion: Don't always trust memtest! :fact:
187(V)URD@
10-19-2005, 02:15 PM
my week 431 does DDR610 3-4-3-7@2.6V
CapFTP
10-19-2005, 02:37 PM
437 and 440 . I have a pair of both :D .

I quote...:)
|3ourne
10-19-2005, 03:41 PM
I quote...:)


I swear these sticks are insane. Both do DDR600 2.5-3-3-6 . The 440 needs a different Tref value , but can handle slightly tighter Alpha timings but both dont need more than 2.7 V for 300 mhz. 437 tops out around 308 mhz or so 2.5-3-3-6 which the 440 tops out around 310 mhz.

God I love these sticks :D . OPB told me a couple of tweaks about these sticks and it was like they got a jolt , and soon they were humming around 300 mhz .

OPB is memory GOD . :bows: :bows: :bows:
ccokeman
10-19-2005, 06:00 PM
Ah you must share the tweaks!!! Had some week 440 le that did 327x7 max and would run 310x8 prime95 stable for 24hrs.
GoThr3k
10-21-2005, 09:30 AM
can you help me with the tweaks????? :woot:
|3ourne
10-21-2005, 11:49 AM
can you post an A64 tweaker screenie please ?
GoThr3k
10-21-2005, 02:38 PM
of my ram you mean????
TheMeatFrog
10-21-2005, 02:51 PM
I swear these sticks are insane. Both do DDR600 2.5-3-3-6 . The 440 needs a different Tref value , but can handle slightly tighter Alpha timings but both dont need more than 2.7 V for 300 mhz. 437 tops out around 308 mhz or so 2.5-3-3-6 which the 440 tops out around 310 mhz.

God I love these sticks :D . OPB told me a couple of tweaks about these sticks and it was like they got a jolt , and soon they were humming around 300 mhz .

OPB is memory GOD . :bows: :bows: :bows:
Please share these "tweaks" with us :D
bachus_anonym
10-21-2005, 03:12 PM
My PC4400LE (with heatspreaders, TCCD 0507) is 32M stable @ 304x11 / 6-3-3-2.5-1T / 2.82v (2.87 w/DMM) (http://www.clockmehigh.com/cooler/screens/3700SD/Gskill4400LE_HS/304x11_3346Mhz_SPi32M_2143906_BIOSnotes.png).
I'm still trying to squeeze out a bit more but it's not looking like I will see more than 305Mhz out of it.
I think 297Mhz will be P95 stable...
Great nonetheless :)

http://www.clockmehigh.com/sig/GskillPC4400LE_a.jpg