Help to keep my BH-6 run stable ..

[HolyAk]

I hv an old stick BH-6 ram from mushkin...model Special 2-2-2
my proc is Athlon64 clawhammer Caa2c s939,able to clock at 2.7ghz rpme stable.

btw,when i set it to 250mhz@2-2-2-5@3.5V,able to run memtest stable for 3 hr ,able to load windows nicely but will crash program sumtimes...

so i need ur guy to gv me some tips or guide to make my ram run stable(trying to) or even make it run faster :P

[oasked]

Try running Prime 95 or OCCT. How long does it take those to fail?

[Oden]

Try to raise the TRC...

[EnJoY]

I hv an old stick BH-6 ram from mushkin...model Special 2-2-2
my proc is Athlon64 clawhammer Caa2c s939,able to clock at 2.7ghz rpme stable.

btw,when i set it to 250mhz@2-2-2-5@3.5V,able to run memtest stable for 3 hr ,able to load windows nicely but will crash program sumtimes...

so i need ur guy to gv me some tips or guide to make my ram run stable(trying to) or even make it run faster :P

What motherboard? What are the rest of your timings?

[HolyAk]

here's my ram timing setting...running on a DFI Ultra-D (Unmodded)

[HolyAk]

drive strgh is 7/3

[Zebbo]

Set Read Preamble to 5ns, Max Async Latency to 7ns and Tref to 1168.

[HiJon89]

Drive Strength 3/1 works well for me with BH-5/6

[HolyAk]

zebbo,thx for gv me some suggestion but still cant fix tat problem.

btw,more drive strgh ex:weak(8/3) can run much stable in windows and less drive strgh:normal (3/1) is better for running memtest,is tat corrrect ?

beside tat for TREF setting,actually which 1 is better for a bh6 ??

[Aleman]

tRFC is horrible, try 14~16.

[HolyAk]

Zebbo,this is my current ram setting...any better than this ?? or could be trying??

actually after i set Tref to 1168,max async 7ns and read preamble 5ns,my ram miraclely can run stable now after 5 hr of burn-in..thx u anyway :banana: :banana: :clap: :clap: