rosco990
09-23-2005, 12:02 AM
Okay, I have mushkin 4000 redline. I have found my max fsb of 320 using a x9 multi and capped at 1.6 vcore. Today I started working on my ram, I have had nothing but one problem after another. First, I got the ram up to 265 3.4v, and it was stable using the 704-2bta bios. Then I proceeded to go for 270, at that time when I rebooted the computer I got a black screen and could not get to bios. Sometimes I can manually power off the computer or press restart a couple times and I will boot. If that doesn't work I have had to clear cmos twice. When I am able to get back in an the computer finally boots I go to bios and it seems no matter what settings I put the problem will still happen. At first I thought it was my raid0 with the 2 300gig maxtors, so I uninstalled the raid, reformatted both 300gigs and installed windows again. Fortunately, I was able to install windows and use the computer for a few minutes. Then I started to start tweaking the ram again the settings I have used are as follows.
250fsb
ldt/fsb x3
cpu/fsb x9
vcore 1.6
ldt voltage 1.3
chipset voltage 1.7
dram voltage 3.2, also tried 3.4, and 3.5
1/1 ratio
cpc enabled
tcl 2
trcd 2
tras tried 6 and 5
trp 2
trc,trfc,trrd,twr,twtr,trwt I have tried auto and 2 for all of them
Alot of my problems seem to also come when I try to exit memtest too. My last restart I was using memtest running test 5,6, and 8. After finding an error in test 6 I tried hitting escape to reboot but nothing happened kept getting black blotches on the screen from hitting escape. So I had to manually press restart then that is when my computer again went to black screen and wouldnt boot up.
__________________
System Specs - View My Complete Profile
CPU
4400x2 Motherboard
dfi sli-dr Graphics Card
2 xfx 7800gtx Cooling
phase/water vapochill
Memory
mushkin redline 4000 1gig Hard Drive
maxtor diamondmax10 300x2 Power Supply
enermax 600w Sound Card
soundblaster audigy2zs
Monitor
samsung 930b 8ms Case
lian li pc65b Operating System
win xp home Mouse / Keyboard
razer diamondback / saitek
250fsb
ldt/fsb x3
cpu/fsb x9
vcore 1.6
ldt voltage 1.3
chipset voltage 1.7
dram voltage 3.2, also tried 3.4, and 3.5
1/1 ratio
cpc enabled
tcl 2
trcd 2
tras tried 6 and 5
trp 2
trc,trfc,trrd,twr,twtr,trwt I have tried auto and 2 for all of them
Alot of my problems seem to also come when I try to exit memtest too. My last restart I was using memtest running test 5,6, and 8. After finding an error in test 6 I tried hitting escape to reboot but nothing happened kept getting black blotches on the screen from hitting escape. So I had to manually press restart then that is when my computer again went to black screen and wouldnt boot up.
__________________
System Specs - View My Complete Profile
CPU
4400x2 Motherboard
dfi sli-dr Graphics Card
2 xfx 7800gtx Cooling
phase/water vapochill
Memory
mushkin redline 4000 1gig Hard Drive
maxtor diamondmax10 300x2 Power Supply
enermax 600w Sound Card
soundblaster audigy2zs
Monitor
samsung 930b 8ms Case
lian li pc65b Operating System
win xp home Mouse / Keyboard
razer diamondback / saitek