7800GTX SLI @ 693/1539MHz

[Kinc]

693MHz (without 40MHz delta) / 1539MHz memory and a tired FX-57. That was the results from yesterdays benchsession :) I managed to pass sampsa in 05 and improve my 01/03 scores.

http://www.ventilationsteknik.com/kinc/05.gif

05 - 16810 3DMarks - http://service.futuremark.com/compare?3dm05=1225697
03 - 38429 3DMarks - http://service.futuremark.com/compare?2k3=4262122

http://www.ventilationsteknik.com/kinc/03.gif

In 03 one of the cards would always shutdown in mother nature when the gpu-clocks were beyond 670MHz. I really don't know why :confused:

01 - 48528 3DMarks - http://service.futuremark.com/compare?2k1=8721737

http://www.ventilationsteknik.com/kinc/mess.jpg
How do you like that mess? :D

http://www.ventilationsteknik.com/kinc/rear.jpg
A half eaten fruit in the upper left corner, yummie

http://www.ventilationsteknik.com/kinc/iceicebaby.jpg
Ice ice baby :p:

http://www.ventilationsteknik.com/kinc/746.jpg
The system is in need of a better cpu (or better suited cooling)

[althes]

That is excellent, any chance of sweeping the field

[olfen]

The weather is getting colder, now we see -c outside:)

[metro.cl]

nice keep trying you got sweet scores :)

[Sheik]

Very nice work. Congrats. What brand is the 7800GTX ?

[Kinc]

Very nice work. Congrats. What brand is the 7800GTX ?

XFX (430Mhz stock, bought em on the launch day). They have been through alot :D

[M.Beier]

This might be a dumb question, but why the heck do you use 2 HDD's ???

One doesnt gain performance by using raid in 3Dmark?? :|

[Sampsa]

Nice! :toast:

It's getting colder also here in Finland so I think we'll give our 7800 GTX SLI one more run before R520s :)

[SIOUX]

This might be a dumb question, but why the heck do you use 2 HDD's ???

One doesnt gain performance by using raid in 3Dmark?? :|


my guess is a Ghost install 12_know. not fun to have to re-install win all the time...:)

[justwOo]

What kinda tubes are you using? :P

[eva2000]

awesome.. very chilly indeed :D

[eBoy0]

:slobber: What kind of voltage are you running through the cards?

[[XC] moddolicous]

Any chance we will see a 700mhz run? U need a really good fx-57, then the orb could be yours!!

[GoriLLakoS]

Dry Ice to VGAs????

Any special bios or nothing?
Voltage to VGAs?

I think you have very good vgas there..!

Nice run!!!

[Kinc]

Thank you all! :)

Any chance we will see a 700mhz run? U need a really good fx-57, then the orb could be yours!!

I did a 05 run @ 702/1455MHz just before i ran out of ice. The cpu tube had to little ice in it so it crashed on me :(

Think I'm going to buy a solid DI tube from MickeyMouse. I just orderd another FX-57 and a new DFI SLI mobo (I like em fresh ;) ). I will be eating ramen and hard bread for a long time now :D

Dry Ice to VGAs????

Any special bios or nothing?
Voltage to VGAs?

I think you have very good vgas there..!

Nice run!!!

No speciall bios at all. It is the original with the tempsensor turned off. And without the 40MHz delta clock.

[eBoy0]

So your saying that's stock vgpu??!! :slobber:

[brandinb]

So your saying that's stock vgpu??!! :slobber:
lol doubtfull

[Kinc]

So your saying that's stock vgpu??!! :slobber:

Far from ;)

[eBoy0]

Far from ;)

I figured, what is your vgpu though?

[wkmgt]

This might be a dumb question, but why the heck do you use 2 HDD's ???

One doesnt gain performance by using raid in 3Dmark?? :|

My guess is that he's using the 2nd HDD for his swap file.

Nice runs Kinc!!

[Kinc]

A new run with the cpu fresh on ice got the cpu just a little bit higher.
16868 - http://service.futuremark.com/compare?3dm05=1229356

http://www.kinc.se/images/05.gif

Better cooling is needed to do more with this very hot FX-57.

[harleybro]

Very nice scores :toast: What does that chip 2d at?

[Kinc]

I managed to run superpi @ 3678MHz. But it was no way near stable there. 3655MHz whre the highest "stable" freq.

[Sampsa]

I managed to run superpi @ 3678MHz. But it was no way near stable there. 3655MHz whre the highest "stable" freq.

Looks like your FX-57 is very similar to mine (0513)

[Kinc]

Yeah they seem to :banana::banana::banana::banana: about the same. I have a 0512.

[k|ngp|n]

Great work kinc.....just saw it this morning man..746 nature is crazy..
That mem speed on the cards is killer. Everyone thinks 05 and 03 are all cpu, but once you hit a certain overclock on the cards you get big point increases from the gpu too. You are only 20mhz lower than me on cpu, but took me with the card clocks.

[JacobHansen]

Serious card clocks kinc!..

Your Gfx container(s) .. Is it a whole container, or 2 ?.. Again NICE card clocks!..

[Kinc]

Serious card clocks kinc!..

Your Gfx container(s) .. Is it a whole container, or 2 ?.. Again NICE card clocks!..

Two containers. The middle one for the first card tube and the seconds back share the same insulation. They are monuted as one tube though.

[k|ngp|n]

Time to get back to work kinc ;).

[Kinc]

Great work kinc.....just saw it this morning man..746 nature is crazy..
That mem speed on the cards is killer. Everyone thinks 05 and 03 are all cpu, but once you hit a certain overclock on the cards you get big point increases from the gpu too. You are only 20mhz lower than me on cpu, but took me with the card clocks.

This is a screen taken from yestedays short session.

http://www.kinc.se/images/748.jpg

748 is scored with 3666MHz and 705/1534MHz. The run before with the same gfx clocks but with cpu at 3697MHz got me a score slightly past 750fps. Unfortunatly the cpu wouldn't run that high more then that time. It would crash randomly at everything above 3655MHz.

Time to get back to work kinc ;).

Lovly to hear king :D I think you have alot of cpupower waiting to be unleashed in 05 ;)

EDIT: http://service.futuremark.com/compare?3dm05=1232050 Crazy cpu speed :D Same chip under LN2?

[k|ngp|n]

This is a screen taken from yestedays short session.

http://www.kinc.se/images/748.jpg

748 is scored with 3666MHz and 705/1534MHz. The run before with the same gfx clocks but with cpu at 3697MHz got me a score slightly past 750fps. Unfortunatly the cpu wouldn't run that high more then that time. It would crash randomly at everything above 3655MHz.



Lovly to hear king :D I think you have alot of cpupower waiting to be unleashed in 05 ;)

EDIT: http://service.futuremark.com/compare?3dm05=1232050 Crazy cpu speed :D Same chip under LN2?


Same everything except my new container. It's all lasted alot of hard sessions, though I could care less if my one slow card dies because I hate it :) and yah full ln2 on everything.

[JacobHansen]

Looking nice guys.. Is there voltmodifications in the bios or have you done it externaly?

[Kinc]

Three short videos of some random benching with 7800 :)

http://www.kinc.se/video/03failure.wmv

http://www.kinc.se/video/05_16810.wmv

http://www.kinc.se/video/999.wmv

Right click and "save as" if you have trubble viewing

[k|ngp|n]

Cool videos kinc :) I love this stuff...LOL @ you yelling when it crashed in first vid and nice 999fps in nature hehe.

[Kinc]

The cpu starts to show some potential. I'm gonna give it a try without the IHS :D

http://service.futuremark.com/compare?2k1=8727895

http://www.student.lu.se/~cie05mhu/3d01.jpg

[Fosco]

Nice benching Kinc :toast:

[althes]

man that 50k is going to fall shortly.

[Kinc]

K|ngp|n will take 50k any second now :)

[eliminate]

thats a really cool GPU container. You will reach 50K soon. Good luck Have some Bananas :banana: :banana: :banana: :banana: :banana: :banana:

[Punisher!]

Grats m8! Excellent job and scores! :D