Phase Change -59c [Archive] - XtremeSystems Forums

LittleDevil

09-09-2005, 01:50 PM

iS.Terminator

09-09-2005, 01:53 PM

Beutiful.......:slobber:

Jonesy

09-09-2005, 01:55 PM

Very clean. What size compressor is that?

LittleDevil

09-09-2005, 02:01 PM

Compresor is Electrolux MP14FB 1/2HP.

<a href="http://img345.imageshack.us/my.php?image=img00056pv9si.jpg" target="_blank"><img src="http://img345.imageshack.us/img345/737/img00056pv9si.th.jpg" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>

Dementor

09-09-2005, 02:02 PM

Not gonna tell us what the specs are? Gases involved etc... Other than that, its AWESOME! Good job.

LittleDevil

09-09-2005, 02:13 PM

The gas is r404.

I am testing 3700+ SanDiego 0525UPMW bad stepping. :cool:

http://img268.imageshack.us/img268/4894/150710ni.jpg

piotres

09-09-2005, 02:16 PM

Nice Phase-change with very powerful compressor :toast: :woot:

How long captube ?

How about stress temps ?

Regards
Peter

LittleDevil

09-09-2005, 02:22 PM

Temps under full load are about -40 degrees.

LittleDevil

09-09-2005, 02:47 PM

I need sleevings for flexibile tube :rolleyes:

Does anyone know where can i buy it in Europe (online shop)...

tnx

cold_ice

09-09-2005, 10:50 PM

Where are you located in Europe?
I buy my sleeving at Conrad electronic store. www.conrad.at
The sleeving is from Hellermann Tyton

LittleDevil

09-10-2005, 12:20 AM

I come from Slovenia.

tnx

The Weedman

09-10-2005, 10:07 AM

Push that 3700 tell it screams :shock2: What size and how long captube did you use?

jinu117

09-10-2005, 10:48 AM

is the compressor quiet? I know my americold compressor was subsidiary of electrolux if I am not mistaken... Looking for powerful yet quiet compressor (and other than Danfoss side which is very expensive... it doesn't look too good)

Waus-mod

09-10-2005, 10:51 AM

Clean build.. very tidy! great job

sharp

09-10-2005, 11:32 AM

How much superheat do you have at full load?

yoni

09-10-2005, 12:34 PM

Great job companion.

is the compressor quiet? this electrolux is more quiet than Danfoss FR8.5CL ?

thanks for your response.

Greetings.

LittleDevil

09-10-2005, 12:56 PM

Captube is 0,7mm and about 2,3m long.

This compressor is not very noisy...

LittleDevil

09-10-2005, 01:22 PM

More pics.

<a href="http://img195.imageshack.us/my.php?image=img00375fi.jpg" target="_blank"><img src="http://img195.imageshack.us/img195/3750/img00375fi.th.jpg" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>

<a href="http://img339.imageshack.us/my.php?image=img00487pm.jpg" target="_blank"><img src="http://img339.imageshack.us/img339/2267/img00487pm.th.jpg" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>

jinu117

09-10-2005, 06:28 PM

About 8 feet of captubing... sounds about right for most CPU. Since cap tubing doesn't look excessively long, that temp you are getting looks very sweet to me !!! Would love to see dual prime loaded temp on X2 with that beastie of compressor.
How quiet or loud is the compressor compared to danfoss NF9?

LittleDevil

09-16-2005, 02:36 PM

Some new pictures

<a href="http://img287.imageshack.us/my.php?image=img00505uz.jpg" target="_blank"><img src="http://img287.imageshack.us/img287/8826/img00505uz.th.jpg" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>

the_new_guy

09-16-2005, 08:00 PM

sweet rig man i see u have not go ur sleeve yet.

LittleDevil

09-17-2005, 09:23 AM

No i can't find it in our country :rolleyes:

LittleDevil

09-17-2005, 11:03 AM

I need some good 3200+ CPU does anyone have it :)

Fast

09-17-2005, 12:04 PM

optimal job, the compressor from 1/2HP is very good for DD;) if pits in you I would try to load the system with with the r402;)

LittleDevil

09-17-2005, 01:23 PM

Little changes

<a href="http://img200.imageshack.us/my.php?image=img00556vy.jpg" target="_blank"><img src="http://img200.imageshack.us/img200/9378/img00556vy.th.jpg" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>

Ssilencer

09-17-2005, 03:15 PM

Nice setup!
Kind of OT, but, How hifg are you getting on your redlines?
I have a problem with my rig, my venice can run prime stable at 3200mhz, but, I cant go higher than 250mhz on the redlines no matter what rail I use, 3 or 5v, no way.
The only way I can go up to 3250 stable is using 2xhtt and 1/2 divisor (100mhz) on the memory.
I tried 4 3200 venice and tccd or redlines, and no go.

LittleDevil

09-17-2005, 11:03 PM

I'm using 702/2 bios, and revision of my motherboard is AB0...

enb-2-2-5-2-7-16-2-2-2-2-2556-1-enb-increase-0-7-3-7-Fastest-4-16-enb-16-7-enb

<a href="http://img376.imageshack.us/my.php?image=2729oz.jpg" target="_blank"><img src="http://img376.imageshack.us/img376/1144/2729oz.th.jpg" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>

Ssilencer

09-18-2005, 12:39 AM

Thanks, I will try it

LittleDevil

10-07-2005, 05:17 AM

Here are some new results.. :)

<a href="http://img183.imageshack.us/my.php?image=54415154wi.jpg" target="_blank"><img src="http://img183.imageshack.us/img183/5745/54415154wi.th.jpg" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>

<a href="http://img121.imageshack.us/my.php?image=img01417ab.jpg" target="_blank"><img src="http://img121.imageshack.us/img121/5161/img01417ab.th.jpg" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>

Athens[2004]

10-07-2005, 05:40 AM

Very Nice :) and Clean Job also .

LittleDevil

10-22-2005, 01:23 AM

Temps under full load 3132Mhz 1.776V

http://www.shrani.si/pics/img_0007110220_thumb.jpg (http://www.shrani.si/pics/img_0007110220.jpg)

Idle temps

http://www.shrani.si/pics/img_0023110221_thumb.jpg (http://www.shrani.si/pics/img_0023110221.jpg)

Gray Mole

10-22-2005, 05:16 AM

That's a nice result for temps. :)

I used the same compressor on my big single, and funny enough I got virtually the same temps under load. That's a really nice compressor, the MP14FB.

Your unit looks great, and is doing a really nice job :)

Gray

LittleDevil

11-26-2005, 04:01 AM

New better temperatures...

http://www.shrani.si/pics/-64150637.jpg

epion2985

11-26-2005, 08:08 AM

wow, nice! What did you change? :slobber:

Shinuza

11-26-2005, 08:13 AM

Very nice!

Two questions :

-What fitting do you use to plug the flexible to your comp? Conversion?
-Is the comp noisy?

Keep it up :)

sharp

11-28-2005, 08:10 AM

Its ss hose with 2 connectors.On one side its 5/8 unf male connector,which came connected to flared copper pipe.
http://www.shrani.si/pics/dsc01653155078.jpg
On the other side its 5/8 unf female and its connected to evap.
http://www.shrani.si/pics/dsc01111155077.jpg

gclg2000

11-28-2005, 10:28 AM

looking sharp man.

sharp

11-28-2005, 12:25 PM

Thx :)

SlackeR

11-28-2005, 01:00 PM

:D

Very nice unit btw :toast:

Shinuza

11-28-2005, 01:37 PM

Its ss hose with 2 connectors.On one side its 5/8 unf male connector,which came connected to flared copper pipe.

On the other side its 5/8 unf female and its connected to evap.

Nice :slobber:

I plan to find to female 1/4 connector, than solder them on a hose on which I will cut both ends. Think it's safe? Possible?

This hose is 15 mm large?

runmc

11-28-2005, 01:42 PM

Coming along nicely Bro :woot:

Jort

11-28-2005, 10:37 PM

Cold ice can you give the Best.-Nr.-Suche:of that sleeving?
tnx

This phase-change looks tidy and cery cold;)

bazx

11-28-2005, 10:45 PM

I need sleevings for flexibile tube

http://www.rs-components.at/cgi-bin/bv/browse/QuickView.jsp?BV_SessionID=@@@@1024596561.11332467 56@@@@&BV_EngineID=cccfaddggfellmhcefeceefdffhdglf.0&cacheID=atnetscape&3310699586=3310699586&catoid=-1637639964

piotres

11-29-2005, 12:11 AM

New better temperatures...

http://www.shrani.si/pics/-64150637.jpg

Woo :woot:

How much loaded ?

Regards
Peter

epion2985

11-29-2005, 01:31 AM

What did you change from the first time you ran it? You were in the -50's at first now you are in the -60's

nice unit :)

sharp

11-29-2005, 06:54 AM

Nice :slobber:

I plan to find to female 1/4 connector, than solder them on a hose on which I will cut both ends. Think it's safe? Possible?

This hose is 15 mm large?

You mean to braze male connectors on both end of hose and connect it with flared copper pipe?That is what i will start to do from now on.Female connectors
is hard to find.
Hose id is 10mm.

cold_ice

11-29-2005, 07:34 AM

Cold ice can you give the Best.-Nr.-Suche:of that sleeving?
tnx

This phase-change looks tidy and cery cold;)Bestell-Nr.: 544532 - 62 on conrad.at

sharp

11-29-2005, 08:22 AM

Any news ice?

jinu117

11-29-2005, 08:30 AM

Amazing... last time I saw below -60c on single stage of mine was I didn't quite finishing charging it up for load and forgot left it running for a while while on the phone :P If that is for load tuned system idle temp... phew... impressive to say the least.

Sneil

11-30-2005, 07:33 AM

What did you change from the first time you ran it? You were in the -50's at first now you are in the -60's

nice unit :)
maybe its winter there and he just took it outside :p: jk

Shinuza

11-30-2005, 11:56 AM

You mean to braze male connectors on both end of hose and connect it with flared copper pipe?That is what i will start to do from now on.Female connectors
is hard to find.
Hose id is 10mm.

Nop, not male connectors, but female ones.

http://www.bes.ltd.uk/products/graphics/7161.gif

I already have this :

http://www.capoeirabrasil.free.fr/daddydod/PICT6741.JPG

I will braze one on my evap, then use a 1/4 female connector and a reducer
15 mm x 10 mm coupling (http://www.bes.ltd.uk/products/graphics/7144.gif) on my hose.

sharp

11-30-2005, 12:04 PM

Yes its ok.

Shinuza

11-30-2005, 01:57 PM

Yes its ok.
Great, thx a lot ;)

LittleDevil

12-19-2005, 01:07 PM

http://www.shrani.si/pics/picture0183627_thumb.jpg (http://www.shrani.si/pics/picture0183627.jpg)

http://www.shrani.si/pics/picture0183626_thumb.jpg (http://www.shrani.si/pics/picture0183626.jpg)

the_new_guy

12-19-2005, 06:03 PM

i see you got ur sleeve!!!

looking good

LittleDevil

12-28-2005, 04:20 AM

http://www.shrani.si/pics/picture0199534.jpg

http://www.shrani.si/pics/picture0199536.jpg

http://www.shrani.si/pics/picture0199538.jpg

http://www.shrani.si/pics/picture0199537.jpg

http://www.shrani.si/pics/picture0199552.jpg

http://www.shrani.si/pics/picture0199550.jpg

tnx

LittleDevil

01-08-2006, 07:09 AM

This is tle last picture of my single stage system... I sold it.

http://www.shrani.si/pics/picture0231546.jpg

tnx

the_new_guy

01-08-2006, 07:14 AM

how much did you get for it?

LittleDevil

01-08-2006, 07:50 AM

Edited by Jinu117: No price shall be discussed in public.

TiN_

07-01-2006, 04:50 PM

Nice setup.
Can I ask you. I'm designing phasechange SS unit for manufacturing in small series for overclockers (-40°C at 250W load with 440x250x250mm case size). Where did you got metal wire tube over the suction line insulation. (difficult to say exactly, I don't know how it's called in english). Similar tubes are also on expensive PSU's but smaller diameters. Can't find any similar local stores. fell free to pm me or to write to my ICQ no : 860 80 981.

LittleDevil

10-13-2006, 03:18 PM

I get back that system for rebuild, new painting, new gas, new suction line + evap and we will see some temps tomorrow ;)

http://www3.shrani.si/files/1997475.jpg

thanks

J0d3r

10-13-2006, 03:34 PM

Nice re-builind, in my opinion now it looks sexy and powerfull. Lets wait for temps

LittleDevil

10-21-2006, 06:03 AM

Bench unit is finished:

http://ld-phasechange.com/images/sale/bench_unit/2.jpg

loaded 185W @ r410

http://ld-phasechange.com/images/sale/bench_unit/1.jpg

thanks