RobOC
09-06-2005, 02:17 PM
hy guys! :)
I've not got idea of how to get an stable and decent overclock with my A8N-SLI premium mobo, my Venice 3500+ core and my pair of Dimms--> 2x1024 OCZ PC 4000: 3-4-4-8 (PSU Enermax 480W kill noise, tower Kandalf by thermaltake, VGA: ASUS EN7800 GTX)
Now I'm running my system at @2651 (2200 default) with this config in bios:
Multi: 11x (Default 11x)
Vcore:1.550 V
Clock: 241 MHZ
DDR CLOCK: 400 MHZ at 3(Tcl)- 4(Trcd)- 4(Trp)- 8(Tras)- 11(Trc)- 16(Trfc)-5 (Trwt)- 3(Twr) 1T------> I don't Know if the Trc,Trfc an the Trwt values are correct because the bios autoset it to 400 MHZ with 2T and i set then to 1 T. What do you think about this? Should i change it?
DDR Volt. 2.80
Chipset Volt: 1.6
HT volt: 1.5
HT multiplier: x4
amd cool n quiet : Off
--------------------------------------->all is stable with superpi and mentest at @2680 and prime fails, but with this configuration prime95 is stable during 5 hours more or less (memtest and superpi o.k.) then crash :banana: .
my results in sandra are :
CPU: between Athlon 53 FX and Atlhon 55 FX-->11100/5425
Memory band...:6750/6650
my temps with my zalman 7000-B CU are:
Idle:43ΒΊ
Full: 55ΒΊ
Chipset: 126ΒΊ fanless
I'm very confused about how i must to do the correct overclock.
What do you think about this config?
At this moment is the most stable config. in performance/stability but I think that is a poor overclock. :(
On the other Hand, clockgen say to me that my system is stable over 2690 but then prime95 fails. :confused:
Please post all your opinions and sugestions over this config and others that you think that could be better than this one and what i must to do or not to do... :rolleyes:
Please help!!!
Thanks in advance and sorry for my poor and terrible english...Rob ;)
I've not got idea of how to get an stable and decent overclock with my A8N-SLI premium mobo, my Venice 3500+ core and my pair of Dimms--> 2x1024 OCZ PC 4000: 3-4-4-8 (PSU Enermax 480W kill noise, tower Kandalf by thermaltake, VGA: ASUS EN7800 GTX)
Now I'm running my system at @2651 (2200 default) with this config in bios:
Multi: 11x (Default 11x)
Vcore:1.550 V
Clock: 241 MHZ
DDR CLOCK: 400 MHZ at 3(Tcl)- 4(Trcd)- 4(Trp)- 8(Tras)- 11(Trc)- 16(Trfc)-5 (Trwt)- 3(Twr) 1T------> I don't Know if the Trc,Trfc an the Trwt values are correct because the bios autoset it to 400 MHZ with 2T and i set then to 1 T. What do you think about this? Should i change it?
DDR Volt. 2.80
Chipset Volt: 1.6
HT volt: 1.5
HT multiplier: x4
amd cool n quiet : Off
--------------------------------------->all is stable with superpi and mentest at @2680 and prime fails, but with this configuration prime95 is stable during 5 hours more or less (memtest and superpi o.k.) then crash :banana: .
my results in sandra are :
CPU: between Athlon 53 FX and Atlhon 55 FX-->11100/5425
Memory band...:6750/6650
my temps with my zalman 7000-B CU are:
Idle:43ΒΊ
Full: 55ΒΊ
Chipset: 126ΒΊ fanless
I'm very confused about how i must to do the correct overclock.
What do you think about this config?
At this moment is the most stable config. in performance/stability but I think that is a poor overclock. :(
On the other Hand, clockgen say to me that my system is stable over 2690 but then prime95 fails. :confused:
Please post all your opinions and sugestions over this config and others that you think that could be better than this one and what i must to do or not to do... :rolleyes:
Please help!!!
Thanks in advance and sorry for my poor and terrible english...Rob ;)