Do you like it?

[Ssilencer]

I present to you our last single stage unit
MCT IV "The mother of all singles" :D

http://img386.imageshack.us/img386/5295/mctszw30gg.jpg

http://img386.imageshack.us/img386/364/mctszw27po.jpg

http://img386.imageshack.us/img386/701/mctszw11uu.jpg

Saludos :up:

[pythagoras]

Very, very nice :toast: Just curious have you tried lowering that desuperheater coil down so that it gets the exhaust from the condensor fan? May make a positive difference may not :(

Regards

John.

[jinu117]

Very pretty :) How come there is no "ass" shot? :P
BTW, one thing I noticed, who in here DOESN'T smoke? (for those who builds this single stage stuff) I have yet to see one who doesn't, and thats counting 4 people I personally met, and bunch others who always post one with marboro for size comparison... :P (I smoke myself... hehe.... Just got curious)
Desuperheater... looks good. There just doesn't seem enough space for getting air cooling on that box (I sure will have plenty on my lian-li case since it is EATX case.... and might try cooling it with left over airflow...)

[Mr. Manka]

utterly beautiful

i hope mine can look 1/4 as good as yours does

[Ssilencer]

Thank you John!
Well, there is not much space to move the desuperheater, but, as you can see, there are 3 120mm fansdoing circulation inside the case, so, it is not a problem for the desuperheater to get air.

Jinu, the "ass" 120mm fan is a Panaflo "H" all 3 fans are regulated by the G-Froster X, they only work at 100% speed in the start, after -30c they slow down to 70% speed (pwm) so it is plenty airflow inside, and the rear fans is positioned to get good flow, so, is a silent unit.

BTW, here you have "my ass" shot :D

http://img375.imageshack.us/img375/9633/mctszw41le.jpg

carbon "ass"

[urbanfox]

Very nice, what are the temps like?

[B5I8]

That thing is beautiful!!! :banana: :banana: :banana: :eek2:

[_HL4E_HalfLife_]

Very pretty :) How come there is no "ass" shot? :P
BTW, one thing I noticed, who in here DOESN'T smoke? (for those who builds this single stage stuff) I have yet to see one who doesn't, and thats counting 4 people I personally met, and bunch others who always post one with marboro for size comparison... :P (I smoke myself... hehe.... Just got curious) :slap: :nono: :slapass:

I DON'T NEVER have NEVER will!!

[C-BuZz]

Very nice work. Top notch finish :)

C-BuZz

[jinu117]

I love the ass :) LoL. Such a clean nice look of carbon... :) Guessing computer power is passed through this unit? (so that it can manually shut off computer if power button doesn't work? :P)

[Ssilencer]

I love the ass :) LoL. Such a clean nice look of carbon... :) Guessing computer power is passed through this unit? (so that it can manually shut off computer if power button doesn't work? :P)

Manually? what´s that?, the froster controls start up and shut down :up:

[jinu117]

Manually? what´s that?, the froster controls start up and shut down :up:

No no no... what I meant was that if temp reaches too high, there must be a logic to shut unit down (by sending power button signal) and than after the set time has expired and temperature is getting dangerous, maybe it shuts down the system forcebly by taking the power off from PSU through back... (maybe I am going bit far.... It could be just simple splitter to the PSU :P).
Used to have relay and control setup like that I made while back when I first got into peltier water cooling... (think about 2 years or 3 now)

[Bloody_Sorcerer]

the flex hose (thing coming out of the top... is that the right term?) looks awfully short.
other than that, beautiful

[Ssilencer]

it shuts down the system forcebly by taking the power off

That is what the froster controllers do for emergency shut down.

Bloody sorcerer, I will take a pic with my computer installed, is not short, it is just perfect. :)

[gkiing]

nice build, but the evap line is a little short IMHO.

just thought i'd add, tobacco smokes YOU

[jinu117]

I actually don't like too long of suction line. Makes it hard to close the lid of case. (which is the case with vapo LS, Mach I, Mach II)

[MeltedDuron]

shiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiit... *chokes on his cornflakes*

[eBoy0]

Jeez, if i were to own/make something like....... sell it?!? :stick:

[Jort]

he sells those units to other people:)

[Athens[2004]]

From the first time i saw it . I love it :hehe:

[ZeroX]

Nice work. It is so beauty :P

Saludos y suerte ;)

[BB mods's]

I want 1 just like that.get on MSN today when u have time and ill trade some of the stuff i have and u want for 1 of them :)

[Entsafter]

very nice front and backpanel :woot:

[Waus-mod]

Beautifull unit there... Cheers!

[Ssilencer]

Thank you guys
Hey BB, contact me by msn bro.

[Ssilencer]

nice build, but the evap line is a little short IMHO.

just thought i'd add, tobacco smokes YOU


I think it's ok

http://img37.imageshack.us/img37/5104/mct1292lq.jpg

[Negroo]

pizza
:D :D

[jinu117]

bling bling :)

[Patrickclouds]

24" Dell tft?
it looks very nice
well done

[BeSaiD]

In english: excellent work, man!

-----

In spanish: La puta q lo parió, esta rebuena...impresionante, loco. Felicidades. :D

[Waus-mod]

Mayb with a p4 setup its difficult to get the evap on it like some one said because the short suction line. but hey! what a great piece of art!

[Ssilencer]

In english: excellent work, man!

-----

In spanish: La puta q lo parió, esta rebuena...impresionante, loco. Felicidades.
:D


In english thanks mate!

IN spanish, jajaja gracias macho, si queres una, te hacemos, calculo que lo conoceras a @itor, al menos por sus radiadores y water blocks.

WAUS, it is simple, I dont think about using a p4 in my single, so, I dont need a hose larger than that, if I want to do something for a p4, I'd used a longer suction line, but again, the suction is larger than you thought...

[Ssilencer]

Little video of the starting secuence
:D (http://sr2.mytempdir.com/145759)

[The Weedman]

Little video of the starting secuence
:D (http://sr2.mytempdir.com/145759)
Wheres the video lol :stick:

[Golden_Eagle]

here ---> :D (http://sr2.mytempdir.com/145759)

[REBEL900]

Nice unit! :toast:

[Bloody_Sorcerer]

as far as i can horribly mis-translate that spanish stuff, it sounds like stuff that belongs in PMs or FS forums :-P
beautiful unit, but i still think that evap line is a touch on the short side. but, if it works, who cares! :)

[s0ulfly]

Little video of the starting secuence
:D (http://sr2.mytempdir.com/145759)

i love the scream :toast:

[Ssilencer]

as far as i can horribly mis-translate that spanish stuff, it sounds like stuff that belongs in PMs or FS forums :-P
beautiful unit, but i still think that evap line is a touch on the short side. but, if it works, who cares! :)

How long do you want a suction line be for an under case single stage?
do you ever made a unit?
do you understand that under the armaflex hose there is suction line flex stainless steel? Do you have a meter in your eyes? :D
please...
Edit: maybe you made a bad translation, we were joking

[jinu117]

After using odd number of units, I can say that the way SSilencer has is probably best for A64 setup (as I always had problem with long suction line). And if I am not mistaken, the tubing can be pulled up a little further up if necessary... right? (Seems like it is P-trap right after the insulation at bottom which can be easily --- welll maybe not so easily-- bent up)

[G H Z]

Thats one damn fine looking cooler Ss. I think you need a black Carrera GT to match this one.

[Ssilencer]

Thats one damn fine looking cooler Ss. I think you need a black Carrera GT to match this one.

IF you want one, we can do it... the porsche carrera off course! :D

Jinu, you're right, btw the suction looks short cause I put a large armaflex insulation over the flex braid near the evap. And yes, I wanted to close the case easily.
http://img142.imageshack.us/img142/1034/mct150medium5og.jpg
http://img142.imageshack.us/img142/5406/flex7qc.jpg
http://img142.imageshack.us/img142/2165/soportema10042tx.jpg
http://img142.imageshack.us/img142/2684/soportema1017large7qi.jpg

[Jort]

Hehe^^

[Gray Mole]

When I run insulation from the evap head, I usually go that far back too, works well.

:toast:

Really beautiful unit. Temps and performance aside, it's just a really well thought out and gorgeous package. :clap:

Gray

[Comp-Freak]

To answer the question, YES! I like it :D

[stockhatch]

You guys are getting too darn professional with these builds :D Make us homemade peeps look pretty, well......homemade :p: Excellent looking unit!

[Ssilencer]

You guys are getting too darn professional with these builds :D Make us homemade peeps look pretty, well......homemade :p: Excellent looking unit!


hehehe thank you stockhatch!
What's your nick means?

[wdrzal]

Very nice "Professional Work" thats just great for the guys who want to use their pc 24/7..........I like it!!!!!

[Ssilencer]

Thank you Walt
I hope some day we can get the units available in the states.

[stockhatch]

hehehe thank you stockhatch!
What's your nick means?

OT :) I made it up when I joined a Mustang forum back in the day and it stuck. When I came up with it, I had a 5.0 Mustang hatchback that was pretty much stock :)

Out of curiosity, do you use dielectric in the socket with your evap hold downs?

[halcy]

What temps do you see with your unit SSilencer?

[s7e9h3n]

http://img375.imageshack.us/img375/9633/mctszw41le.jpg

carbon "ass"
Sweetness :toast: ....now let me ask you - what's the two plugs on the bottom for (obviously, besides power :p: )?
BTW, here's how I cool my desuperheater (2x80mm fans):
http://img326.imageshack.us/img326/5096/desup7rp.jpg

[Ssilencer]

OT :) I made it up when I joined a Mustang forum back in the day and it stuck. When I came up with it, I had a 5.0 Mustang hatchback that was pretty much stock :)

Out of curiosity, do you use dielectric in the socket with your evap hold downs?
yeap, I used dielectric in the socket, and something like liquid electrical tape and dielectric grease on the back. I'd never had a probb caused by moisture, so I will continue using it.

[Golden_Eagle]

what's the two plugs on the bottom for (obviously, besides power :p: )?
One is the power input. the oter is the output that controls the pc-psu

[halcy]

What kind of temps is the unit getting under idle/load and what are the specs on the cpu?

[Ssilencer]

What kind of temps is the unit getting under idle/load and what are the specs on the cpu?

This unit was doing -50 under load with a newcastle 3000+ @3200mhz 1.85v
Now is doing nothing, cause now I have a :banana: venice and a pair of :banana: memory :(
I'd overcharged it a little now to cool the compressor a bit more as it is now in a closed case and as you know, the venice didnt need extreme temps, so, now is at nothing :( waiting to get a pair of TCCD and a good processor next week.

[jinu117]

X2! X2 :)
Gotta tell you, that is the way to test heat on AMD :P

[Ssilencer]

X2! X2 :)
Gotta tell you, that is the way to test heat on AMD :P

Send me yours!
:banana:

[Dementor]

Thank you John!
Well, there is not much space to move the desuperheater, but, as you can see, there are 3 120mm fansdoing circulation inside the case, so, it is not a problem for the desuperheater to get air.

Jinu, the "ass" 120mm fan is a Panaflo "H" all 3 fans are regulated by the G-Froster X, they only work at 100% speed in the start, after -30c they slow down to 70% speed (pwm) so it is plenty airflow inside, and the rear fans is positioned to get good flow, so, is a silent unit.

BTW, here you have "my ass" shot :D

http://img375.imageshack.us/img375/9633/mctszw41le.jpg

carbon "ass"


Haha, its awesome! Just noticed one thing. Either that was a really up close picture, which I know its not, or that is one very big capacitor.... Whats the rating on that cap?

[Ssilencer]

I dont remember but it is not big, just a little bigger than a box of Marlboro :D
And is not in the single.

[Ssilencer]

Little movie (http://rapidshare.de/files/10828271/Start.avi.html)

[serial_killer]

I present to you our last single stage unit
MCT IV "The mother of all singles" :D

http://img386.imageshack.us/img386/5295/mctszw30gg.jpg

http://img386.imageshack.us/img386/364/mctszw27po.jpg

http://img386.imageshack.us/img386/701/mctszw11uu.jpg

Saludos :up:

nice looking vapor phase U got there. Now oc in the dark room is also one part of the disko fever.

[the_new_guy]

looks gr8!!
is the fan painted?

[Wulfgang]

Hello,
I'd like to talk with you about building these units en masse (or at least as they are ordered) for our business. Please email me at zen269@yahoo.com.

Very nice work.

-Wulfgang

[Jack]

looks gr8!!
is the fan painted?
i believe it's a Titan LED fan

[Ssilencer]

Hello,
I'd like to talk with you about building these units en masse (or at least as they are ordered) for our business. Please email me at zen269@yahoo.com.

Very nice work.

-Wulfgang

Nice idea...
I will :up:

[LukeXE]

@jinu117, I don`t smoke ;)

@Ssilencer, nice work mate ! Did you test it with load ?

Update, I missed last two pages :p

[predator500]

Man that is very nice good work.

[Ssilencer]

Thanks
This unit is not any more in my hands, it is in the UK now, being modded by Gray Mole for the guy that bought it.

As for load testing:

http://img59.imageshack.us/img59/7302/load6mn.jpg

NOTE THE FAN SPEED LOW (SILENT)

:D

[Haar]

Top nice there

[ludeboy12]

wow that unit looks real nice. Love the shiny panels and the blue lights.

damn we got some good builders on this forum