Help me in Wiring this compressor...

[Nyx]

REally need your help guys..

I got a R404A/507 from a freezer and have problems wiring it.
You see i have got two white wires which goes to the thermostat but on looking the wire connection, i found that one of the white wire has got 2 out of its 3 wires connected the one which is not connected is the yellow-green wire. while the other has all connected including the yellow-green one.

The wires in the white wire are yellow-green, blue and brown. I want to know how do i go about connecting this thermostat wires together.

Do i just connect the brown and blue, leaving the yellow green wires.
Or could i just remove the thermalstat wires. The compressor has thermal protection connected to it also.

All of the information i have on this compressor are how to connect the thermal protection.

Model of the compressor is a Electrolux R404A/507 ML90FB. 1/3Hp, LBP.

http://www.rtitech.com/2003%20Web%20Design/560-80242-00%20Electrolux%20Compressor%20Wiring.pdf


Or is it possible to buy a new thermal protection kit and install it on this compressor.

[cold_ice]

So you want to remove the thermostat? You only have to pull out the two wires comming from the thermostat. Then you connect these two slots together.
The yellow-green wires are ground. It looks ok on the picture.