DFI Problem With Trtw 1

[LivingL@rGe81]

Alright Guys,

I'm testing my rig out for the best bench settings....

I can get my corsair bh-5 to 275Mhz 3.6V :D Dual Channel....

The problem is I can use Trtw 1 with any multi upto 272Mhz except with the 13x multiplier, it won't even make it to windows, if I change it with A64 tweaker it crashes instantly... but with any other multi is (E.g. 10x,11x,12x,14x,15x) 100% stable & useable.... What do you guys reckon is it a bios problem or a IMC problem....

I'm using 510-2FIX bios at the moment

Thanks For The Help

[LivingL@rGe81]

I really wanna use Trtw 1 as it gives a nice boost in 3DMark 01 & a boost in PI scores(which I broke into 23 Secs last night, only just @ 13 x 267 Trtw 2 :mad: )

[brandinb]

id say use bios 704-2 it has all the latest fixes and i have found no mem divider or multiplier issues yet so i think its your best bet

[bachus_anonym]

How about using a divider and x12 multi? If it works at x12, but not x13 then there a chance with a divider... Have you tried that yet? E.g. 295x12=3540Mhz div180 ---> DDR544...

EDIT: SCRATCH THAT! You won't get DDR544 at div180 and x13 multi... It's CPU/14 not CPU/13 :( So the only way for you is to shuffle couple more BIOSes and see maybe there's aome help... It's kind of sad that OCs are not consistent at all multis, but then again, it's been like that forever...

[esdee]

trtw=1 ... what a pia especially when the bandwidth goes high

i'd say it's not only BIOS related problem, but also a IMC problem
ive been searching to find a way to use trtw=1 but a dead PSU-board stoped me
all i found was that my IMC had some limit when unbuffered b/w under memtest went higher than 3800MB/s.
and talking about limit not a memtest limit , memtest was fine but even if could make it in windows there was little or no stability at all

i was using 310 official BIOS and there was no way to solve this, no matter what i did
last thing i did was flashed 623 BIOS. but after a couple of reboots i lost board-PSU
the initial results with 623 BIOS where very promising btw,
give the newer BIOS versions a try.

can you also tell me what is your bandwidth under memtest when you start having trouble with stability?