hold me back or i'll break it!!!

[felix88]

[23:44:21] Protein: p620_designvln_ext
[23:44:21] - Run: 16 (Clone 94, Gen 12)
[23:44:21] - Frames Completed: 193, Remaining: 7
[23:44:21] - Dynamic steps required: 35000
[23:44:21]
[23:44:21] Writing local files:
[23:44:21]
[23:44:21] parameters work/wudata_00.prm
[23:44:21] - Writing "work/wudata_00.key": (overwrite) successful.
[23:44:21] - Writing "work/wudata_00.xyz": (overwrite) successful.
[23:44:22] - Writing "work/wudata_00.prm": (overwrite) successful.
[23:44:24] - Writing "work/wudata_00.key": (append) successful.
[23:44:24]
[23:44:24] PROJECT="work/wudata_00", NSTEPS=35000, DT=2.0000, DTDUMP=10.000000, TEMP=298.00
[23:44:24] TINKER: Software Tools for Molecular Design
[23:44:24] Version 3.8 October 2000
[23:44:24] Copyright (c) Jay William Ponder 1990-2000
[23:44:24] portions Copyright (c) Michael Shirts 2001
[23:44:24] portions Copyright (c) Vijay S Pande 2001
[23:44:35]
[23:44:35] Received faulty work unit.
[23:44:45] logfile size: 20480
[23:44:45] - Writing 20992 bytes of core data to disk.
[23:44:45] end (WriteWorkResults)

ARRGH!!! and it only had 7 fames left!! it took 20 mins a frame for the first 193 frames. damn celeron!!

[Preventer]

That sux!! :( I know how ya feel... Had a couple of them come thru.

[felix88]

this is the first one that has done this. is there any specific cause?

the most recent thing i've done was swap out beta2 client for the 3.24 client currently available.

[Preventer]

Originally posted by felix88
is there any specific cause?


Just a faulty work unit I am assuming,..... it happens :(

[felix88]

oh well, the celeron has served me well for for 4 years now, i'll refrian from breaking it.

hopefully the next faulty WU i get isn't worth so much.

[majormav]

20min per frame .... wow thats what i call determination heres my work rig on same protein whilst im surfing and d loading
[03:05:59] Protein: p620_designvln_ext
[03:05:59] - Run: 39 (Clone 53, Gen 5)
[03:05:59] - Frames Completed: 0, Remaining: 200
[03:05:59] - Dynamic steps required: 1000000
[03:05:59]
[03:05:59] Writing local files:
[03:05:59]
[03:05:59] parameters work/wudata_02.prm
[03:05:59] - Writing "work/wudata_02.key": (overwrite) successful.
[03:05:59] - Writing "work/wudata_02.xyz": (overwrite) successful.
[03:05:59] - Writing "work/wudata_02.prm": (overwrite) successful.
[03:05:59] - Writing "work/wudata_02.key": (append) successful.
[03:05:59]
[03:05:59] PROJECT="work/wudata_02", NSTEPS=1000000, DT=2.0000, DTDUMP=10.000000, TEMP=298.00
[03:06:00] TINKER: Software Tools for Molecular Design
[03:06:00] Version 3.8 October 2000
[03:06:00] Copyright (c) Jay William Ponder 1990-2000
[03:06:00] portions Copyright (c) Michael Shirts 2001
[03:06:00] portions Copyright (c) Vijay S Pande 2001
[03:08:12] Finished a frame (1)
[03:10:24] Finished a frame (2)
[03:12:39] Finished a frame (3)
[03:14:55] Finished a frame (4)
[03:17:11] Finished a frame (5)
[03:19:27] Finished a frame (6)
[03:21:41] Finished a frame (7)
[03:23:55] Finished a frame (8)
[03:26:07] Finished a frame (9)
[03:28:19] Finished a frame (10)

hope you get a good one next time as they are good pointers

[felix88]

well, i've gotta give it credit. it's a celeron 300a @ 464MHz on a BH6, the damn setup just won't die so i put it back to work. it's working on a "p621_trpzip1_nc_ext" and it takes about 8 mins a frame.

my xp1800 @ 1835MHz does quite a bit better than the celeron:

[00:42:29] Protein: p620_designvln_ext
[00:42:29] - Run: 60 (Clone 44, Gen 9)
[00:42:29] - Frames Completed: 0, Remaining: 200
[00:42:29] - Dynamic steps required: 1000000
[00:42:29]
[00:42:29] Writing local files:
[00:42:29]
[00:42:29] parameters work/wudata_01.prm
[00:42:29] - Writing "work/wudata_01.key": (overwrite) successful.
[00:42:29] - Writing "work/wudata_01.xyz": (overwrite) successful.
[00:42:29] - Writing "work/wudata_01.prm": (overwrite) successful.
[00:42:30] - Writing "work/wudata_01.key": (append) successful.
[00:42:30]
[00:42:30] PROJECT="work/wudata_01", NSTEPS=1000000, DT=2.0000, DTDUMP=10.000000, TEMP=298.00
[00:42:30] TINKER: Software Tools for Molecular Design
[00:42:30] Version 3.8 October 2000
[00:42:30] Copyright (c) Jay William Ponder 1990-2000
[00:42:30] portions Copyright (c) Michael Shirts 2001
[00:42:30] portions Copyright (c) Vijay S Pande 2001
[00:45:11] Finished a frame (1)
[00:47:51] Finished a frame (2)
[00:50:32] Finished a frame (3)
[00:53:10] Finished a frame (4)
[00:55:51] Finished a frame (5)
[00:58:29] Finished a frame (6)
[01:01:08] Finished a frame (7)
[01:03:48] Finished a frame (8)
[01:06:29] Finished a frame (9)
[01:09:11] Finished a frame (10)