Please help build Gskill FF Database

[Onepagebook]

Hey Dear all my friends here,
Here is nothing to do with AD, just sincerely would like to know those who have purchased GSkill FF, what's the result and setup(timing ex. a64tweaker setting,vdimm..etc.)
Please let us know so that others might be able to take that as reference. Please describe as details as you can. Thank you very much. Only FF please.

For instance:


FSB:300
divider: 1:1
Power:OCZ powerstream 600
CPU: FX57

Timing--->(order as A64tweaker)
TCL:2.5
trc: 7
Trfc:14:
Trcd:3:
Trrd:2:
Tras:5:
Trp:3
TWR:2
Twtr:1
Trtw:2
Tref: 4708; 166 MHz 1.95us
Twcl:1clk
DQS skew mode: fast (not set under bios)
DQS skew:96~144 (not set under bios)
****************************************
Read Write Queue Bypass:16x
Controller Mode: 128bit
ECC: disable
2T timing: Disable
Bypass max: 7x
Max Async Latency: 8ns (set auto under bios)
Read Preamble: 4ns~4.5ns(set auto under bios)
idle Cycle Limit:0~16clks
Dynamic idle Cycle Counter: Enable


**Driving strength: 8
**Data strength:3


Highest stable fsb and main timing: 321.8 , 2.5-4-3-5-7-14
Highest stable fsb vdimm used: 2.82v
Highest fsb bench passed: Super pi 16m



Thank you very much for help.


OPB

[wwwww]

not on a k8 but

855GME
223MHz
2
2
2
6
@ 2.5V

[kakaroto]

PC4800 1GB FF @312MHz 2.5-4-3-7 1T

For A64 settings, see picture.

Max stable 100%+ memtest 3.2 coverage.

http://www.xtremesystems.org/forums/attachment.php?attachmentid=35920&stc=1

Drive strength: 7
Data strength: 2

No SKEW increase.

[cupra]

my FF

FSB:300
divider: 1:1
Power:OCZ powerstream 600
CPU: FX55 2.5-3-3


2.7v
24/7
bios 5.10

[formyfaith]

nice thread. :)

http://myhome.hanafos.com/~onechu/ramresults/gskill_ff_309_32mbspi.jpg

FSB: 309
divider: 1:1
Power: OCZ powerstream 520
CPU: San Diego 3700+

Timing--->(order as A64tweaker)
TCL: 2.5
trc: 7
Trfc: 13
Trcd: 3
Trrd: 1
Tras: 5
Trp: 3
TWR: 2
Twtr: 2
Trtw: 2
Tref: 4708; 166 MHz 1.95us
Twcl: 1clk
DQS skew mode: fast (not set under bios)
DQS skew: 0 (not set under bios)
****************************************
Read Write Queue Bypass:8x
Controller Mode: 128bit
ECC: disable
2T timing: Disable
Bypass max: 4x
Max Async Latency: 8ns (set auto under bios)
Read Preamble: 5ns(set auto under bios)
idle Cycle Limit:16clks
Dynamic idle Cycle Counter: Enable


**Driving strength: Auto
**Data strength: Auto


Highest stable fsb and main timing: 309 , 2.5-3-3-5-7-13
Highest stable fsb vdimm used: 3.0v
Highest fsb bench passed: Super pi 32m

[eva2000]

can you guys post bios used and week/date TCCD that your FF are i.e. TCCD 507 or 440 etc as well

[TuKo]

Huston I think I've a problem there with my GBFF kit...

http://www.fourmiz.org/~tuko/octane/gbff.jpg

I need to pump them up to 3.0v to get this... Yeah right, this isn't even the rated DDR550 speed. I've switched both sticks, changed my motherboard and tested them with some CPUs (FX-55 and two 4400+).

What sould I do ?

Just the same with 704-2BT and 623-3.

[babyelf]

processor limitation?

[s7e9h3n]

Here's a little something I was playing with yesterday:
http://img39.imageshack.us/img39/5278/28001ma6kg.jpg

http://img39.imageshack.us/img39/8083/29001m1sd.jpg