DFI & 4 x 512 LE best bios and settings

[fatty]

Hi guys I have been playing around with my bios's and cant seem to remember which one I was using to get the best stable o/c ( stupid me ) anyways I was just wondering if anybody wanted to post what they would recomend

I am using an FX57 and 4 x 512 4400 LE sticks

cheers

[Lidocaine]

Bios 3-10 works the best for me and I've tried them all. Your mileage may vary.

HTT260 with 4x512 1:1

DRAM Freq = 200 1:1
CPC = Disable
Tcl = 2.5
Trcd = 3
Tras = 11
Trp = 3
Trc = 15
Trfc = 17
Trrd = 2
Twr = 2
Twtr = 2
Trwt = 2
Tref = 3072
Twcl = 1
DRAM Bank Interleave = Enabled
DQS Skew Control = Increase
DQS Skew Value = 0
DRAM Drive Strength = 7
DRAM DATA Strength = 2
Max Async Lat = 8
Read Preamble Time = 6
Idle Cycle Limit = 256
Dynamic Counter = Disable
R/W Queue Bypass = 16x
Bypass Max = 7x
32-byte Granularity (Disable 8 burst)

HTT260x10 4x512 2T 1:1 (http://216.77.188.54/coDataImages/p/Groups/251/251420/folders/190829/1616181HTT260x10with2gigs.JPG2.JPG)

OR

HTT285x9 w/4x512 @2T 1:1 (http://216.77.188.54/coDataImages/p/Groups/251/251420/folders/199156/1636745HTT285x9with4x512.JPG)........... :D

[Onepagebook]

I don't think you can have full 4 dimms by using 310 bios:)
Try merlin mod bios

[Onepagebook]

Sorry for my browser go crazy. :(

[HousERaT]

623-3 was the one that got my PQI TCCD going 512x4. Give that a try.

[Micutzu]

331-3 worked fine for me with 4X512MB of Corsair TCCD RAM. They clocked decently (250Mhz+ stable), but i was limited by one of the pairs (that gay XMS Xpert stuff).

[amrgb]

Here are my settings with 510-2 for 4x512 286Mhz 2.5-3-3-8@2.9v with same board and memories as you (from top to bottom):
200-D-2.5-3-8-3-16-22-3-3-2-3-2046-1-E-A-0-7-2-9-F-7-256-E-16-7-D

Find the screenshot in my sig.

It is a good idea to swap memories around once you find your maximum with the memories in the slots they are now. To get the right memory in the right slot can make a huge difference (10Mhz, maybe more) and you can only be sure to achieve the optimal placement if you try all the 24 possible combinations.

[oasked]

623-3 has been the best for me, but I'm not using 4x512mb G.Skill LE, I'm only using 2x512mb. :)

[fatty]

Cheers for the reply's I had 300 x 12 for a little while lol but I will try some other tweeking :)

[oasked]

Now got the extra gig. 260Mhz at 2.5-3-3-6 seems stable (2t, Bank Interleave = disable). Should be able to push it further - watch this space! :)

[xenolith]

623-3 good for 4x512 UTT too? I hope to get my 2GBs of Gskill GBGH stable at around 250 2-2-2 when I get my NF4 stuff up and running.