Sempron 2600+ 64bit socket 754 [Archive]

iMAX

07-31-2005, 10:34 AM

I just received the Sempron 2600+ 64 bit - revision E6 from distributor in VietNam and interrest with it :p:

System :

DFI LP UT 250Gb (bios NF3LD504)
Sempron 2600+ BOX, 1600Mhz, 128KB cache L2 (SD2600AIO2BX - code 0527)
Gskill PC 4400 2*256 (TCCD - 431 )
WaterBlock DangerDen TDX

With vcore 1.55

2.64Ghz@330*8 : stable 3h20m

2.7Ghz@338*8 :

- SuperPI 1M : 33.297s
- SuperPI 32M : 28m 33.234s

Sempron is good for small budget :D

brandinb

07-31-2005, 10:39 AM

lol 128k of cache hehe it still performs prett good tho

Korpse

07-31-2005, 10:52 AM

d2ol stable at 2.7ghz?

[XC] moddolicous

07-31-2005, 05:05 PM

I have a 2800 @ 2400 (got it finally) air cooling 8*300 with a half divider (horrible mem). These chips are really good overclockers.
d2ol stable at 2.7ghz?
I would also like to hear the answer to this question.

MaxxxRacer

07-31-2005, 05:21 PM

pretty darn good for such a budget chip though its rather crippled by the 128kb cache

perkam

07-31-2005, 05:25 PM

Damn...celeron gets its butt kicked...again :(

Perhaps intel needs Celerons with HT to counter this :p

Perkam

iMAX

07-31-2005, 05:37 PM

d2ol stable at 2.7ghz?

Still testting, stable 2.7G with vcore 1,62V :)

I'll post a screenshot tonight :D

Korpse

08-01-2005, 02:22 AM

sweet!

have to remember for us D2OLers, that eve D2OL isnt 100% stable even if youre PC is Prime stable, well thats the case for me :confused:, system primestable at 2.64ghz, d2ol stable MAX at 2.6ghz

AzN_plyR

08-01-2005, 12:55 PM

wait... VIetnam has amd cpu's??? holy crap... I am goiing there on sunday...OMG if I see some.. they would cost like 2 bucks american... I am gonna buy everything! :P

and If I find some FX chips.... WOW :P

thienloi

08-01-2005, 03:08 PM

Still testting, stable 2.7G with vcore 1,62V :)

I'll post a screenshot tonight :D

d2ol or fold stable at 2.7ghz 24/7? :toast:
I think not sure!

xs64

08-01-2005, 03:19 PM

d2ol or fold stable at 2.7ghz 24/7? :toast:
I think not sure!
Why not ? , i make sure that folding is not stress than prime95 , even my CPU fail prime at 2.5Ghz in a minute , i can fold 24/7 :rolleyes:

However , prime just stable at 2.3Ghz :slapass:

xs64

08-01-2005, 03:20 PM

iMAX

08-01-2005, 08:13 PM

d2ol stable at 2.7ghz?

d2ol or fold stable at 2.7ghz 24/7? :toast:
I think not sure!

I'm sorry, I'm wrong, It not stable d2ol :(

Try testing with prime.

thienloi

08-02-2005, 02:14 AM

Why not ? , i make sure that folding is not stress than prime95 , even my CPU fail prime at 2.5Ghz in a minute , i can fold 24/7 :rolleyes:

However , prime just stable at 2.3Ghz :slapass:
I don't think so! :nono:

Xyus89

08-02-2005, 08:59 AM

The sempron is just a office processor with little cache, just like the celeron but it only clocks better.

xyus

ZX7891

08-02-2005, 09:07 AM

I wouldnt really compare the sempron to the celeron....the celeron is usually 1 step back from the P4 as now the P4s are 800bus and the celerons are 533bus and they also lack the cache...Semprons just lack the cache and thats all thats stopping them from becoming A64's plus the cache isnt a huge deal as it already has the memory controller and the latency is so low anyway..

dippyskoodlez

08-02-2005, 09:16 AM

Damn...celeron gets its butt kicked...again :(

Perhaps intel needs Celerons with HT to counter this :p

Perkam

:ROTF: You're killin meh :p:

AzN_plyR

08-02-2005, 01:05 PM

Yep , but the price in Vietnam is also higher than in US :slap:

it's higher? :(

xs64

08-02-2005, 01:52 PM

it's higher? :(
right ! i'm Vienamese but now i'm living in Germany , so i know all about Vietnam ;)
At least u must pay more 20 - 30$ for a 3000+ chip in Vietnam :slapass:

@ iMAX : keep that baby coming , i wanna see it @ 2.7Ghz stable :slap:

UCmajewski

08-02-2005, 02:02 PM

_Eduard_

08-03-2005, 04:52 AM

Damn I must get me one of those... my non-64 bit 2600+ only clocks to 2.3ghz stable

celemine1Gig

08-03-2005, 02:51 PM

Anyone tried out a socket 754 nf4 board yet ? All these DFI NF3 250's are good and all ..... but i'd really like to see someone test out on a more HTT friendly chipset. Me thinks that these chips have much much more in them.

The DFI NF3 LP UT is HTT friendly. I don't know what you mean exactly when saying "HTT friendly", but over 350MHz HTT for example is no problem with most DFI LP NF3 boards.

Anyway, I'm still with you. ATM, I'm waiting for the new DFI NF4X-AL board (well or another Nforce4-4X chipset based Socket754 board to accompany my Oakville CPUs).

iMAX

08-03-2005, 03:25 PM

@ iMAX : keep that baby coming , i wanna see it @ 2.7Ghz stable :slap:

Yes sir, here for you :D

@2.7G : stable 6h10m, vcore 1.68V fullload 1.72V

seldomsean

08-03-2005, 03:39 PM

Yes sir, here for you :D

@2.7G : stable 6h10m, vcore 1.68V fullload 1.72V

Very nice... :explode2:

xs64

08-03-2005, 04:02 PM

Yes sir, here for you :D

@2.7G : stable 6h10m, vcore 1.68V fullload 1.72V
:D Nice clock :toast:
I will tell my father buying one to replace his old school AXP 1800+ :D

thienloi

08-03-2005, 11:30 PM

:D Nice clock :toast:
I will tell my father buying one to replace his old school AXP 1800+ :D

Can I help you? :toast:

Squid_Spit

08-04-2005, 12:43 AM

For amd's most low end chip, a 1.1ghz oc is very nice.

Sz1hart

08-04-2005, 01:47 AM

sabrewolf732

08-04-2005, 01:57 AM

The sempron is just a office processor with little cache, just like the celeron but it only clocks better.

xyus

not really... My paris outbenched a 3.8GHz p4.........

sabrewolf732

08-04-2005, 01:59 AM

hey xs64, I'm Vietnamese too...:)

So it cost more then in say the US? I may just get one, I still have some family members over there that could get me some if its dirt cheap...to bad.

Anyways, nice oc

technology is usually more expensive in forgein poorer countries. At least, that's how it is in south america.

13oost

08-05-2005, 11:20 AM

just got my 754 sempron w/ x86-64 and SSE3

SDA3300AIO2BX
LBBWE 0526APBW

testing will come soon

ZX7891

08-05-2005, 11:21 AM

There are two versions of sempy 2600s on newegg... spend the 9 bucks and get the one with 64bit and sse3

high5

08-07-2005, 10:24 AM

For amd's most low end chip, a 1.1ghz oc is very nice.
but these semprons are basically single-channel venice cores with less cache so results aren't so suprising imho.

Darklord

08-12-2005, 12:51 AM

Yesterday i recieved my 2500+ which is 64 bit with E6 core.I updated my BIOS on the Asus K8N-E-Deluxe to 1010.After doing so,system is running perfectly fine but i dont see the Vcore option anywhere.Where did it go ? any solutions ?

Although i managed 2.1GHz on it, i am sure it is capable of much more but interestingly my board dumps as soon as i go past 305 HTT,i have kept HTT multiplier on 2x.

high5

08-12-2005, 01:52 AM

i think that asus board you have can't change voltage. i don't know if its sempron related or not. my friend had the same issue.

Backbone

08-12-2005, 04:57 AM

If CPU not support C'n'Q ,Asus K8N can't change voltage.

saaya

08-12-2005, 05:38 AM

sweet man! thx for sharing your results! :toast:

can you post some 64bit results?

EazTerence

08-12-2005, 06:37 AM

Hi.

I maybe getting the 2800+ one.. Anywayz, is it a Paris or Palermo? Its Palermo right? Cuz 90nm..? They are also Single Channels only right?

EazTerence

08-12-2005, 06:42 AM

Hi.

I maybe getting the 2800+ one.. Anywayz, is it a Paris or Palermo? Its Palermo right? Cuz 90nm..? They are also Single Channels only right?

Updates: It is also 64Bit one right?

high5

08-12-2005, 07:17 AM

64bit ones should have amd64 label on packaging.

all s754 cpu's are single-channel.

there are only 3100+ and 3000+ 130nm semprons, i doubt you'll find any of those these days.

Backbone

08-12-2005, 09:45 AM

I order 3000+ and G.skill value ZX from newegg.I post benchs later

high5

08-12-2005, 10:18 AM

newegg ships to bulgaria?

iMAX

08-13-2005, 08:36 AM

can you post some 64bit results?

Yes sir,

Sys :
DFI NF3-250
Sempy 2600+ @2.72Ghz
Gskill PC4400 LE/431 @302, 2.5-4-3-7, 1T
AIW X800SE mod 16 pipelines @450/850

some benches with a lot of screenshot

3DMark :

3DMark 01 : 25889

3DMark 03 : 11618

3DMark 05 : 5454

iMAX

08-13-2005, 08:39 AM

Sissoftsandra :

CPU Arithmetic Dhrystone ALU : 11478

RAM bandwidth Buff'd : 4688/4689 MB/s

iMAX

08-13-2005, 08:46 AM

Memory everest :

Memory read : 4708 MB/s

Memory write : 1885 MB/s

Memory latency : 37ns

Zanr Zij

08-13-2005, 08:47 AM

Cool man ! Cool System and cool overclock :toast:

high5

08-13-2005, 08:58 AM

nice :up:

couple of questions:

whats the stepping? :)

what are the max (stable) clocks at 1.4v and 1.5v?

iMAX

08-13-2005, 09:02 AM

CPU everest :

CPU Queen : 2443

CPU PhotoWorxx : 11094

CPU Zlib : 13829 KB/s

iMAX

08-13-2005, 09:06 AM

Cool man ! Cool System and cool overclock :toast:

Thank man :D , how are you?

Have y got new CPU yet?

nice :up:

couple of questions:

whats the stepping? :)

what are the max (stable) clocks at 1.4v and 1.5v?

please wait a minute :p:

Stepping code LBBWE 0527 UPEW

EverLove

08-14-2005, 08:39 AM

Good result man
I am Vietnamese too.
@AzNPnyR: AMD Athlon 64 3000+ venice will cost u $170 in Vietnam lol

xs64

08-14-2005, 09:19 AM

64bit Sempron results posted
Posted by: saaya on Saturday, August 13, 2005 - 03:43 AM
Our member iMax from Vietnam managed to get a 64bit Sempron and reached an overclock of over 1Ghz! He got his 2600+ (1.6ghz 128kb L2 cache) to 2.7Ghz despite the very low multiplier most likely limiting his overclock. not bad for a 60$ cpu!

for more details check out his thread here
Hehe i saw this post in the front page XS :D

i found nemo

08-14-2005, 09:28 AM

on my 3000+ sempron that i used to own (not sse3 or 64-bit enabled) i could not hit anything above 2.37ghz prime stable :( that din't stop me from forcing 2.47 ghz on it though he he he

Backbone

08-17-2005, 12:38 AM

newegg ships to bulgaria?
Nope

high5

08-17-2005, 02:42 AM

then how do you mean you ordered from newegg?

someone from us will send you?

Hugo van Dijk

09-03-2005, 03:15 AM

My new Sempron arrived together with some TCCD twinmos Ram.

Still waiting for the DFI board to arrive.

Its a

SDA2800AI03BX
LBBWE 0526APBW
Z721899F53199

batch :stick: 3199

I don,t realy believe in batch codes, but 3199 is very high :(