PDA

View Full Version : Heres Pics of My New System! (3700+ & DFI)

BrokenWall
07-30-2005, 08:52 PM
So i got my new system tuesday and got it put together yall might of read a few of my posts but i got most of the bugs worked out so i thought i would take a bit of time to post some pics of this new system, i am just using a cheap MX4000 since its the only PCI card i have till thursay when i get paid and go and pick up my ASUS 7800GTX from monarch!

My new 3700+ San Diego!
http://www.xtremesystems.org/forums/attachment.php?attachmentid=35096&stc=1

My OCZ Platinum Revision 2
http://www.xtremesystems.org/forums/attachment.php?attachmentid=35097&stc=1

My PC-V1000 Case which i bought for $100
http://www.xtremesystems.org/forums/attachment.php?attachmentid=35098&stc=1

2 Pics of the wiring inside!
http://www.xtremesystems.org/forums/attachment.php?attachmentid=35099&stc=1 http://www.xtremesystems.org/forums/attachment.php?attachmentid=35100&stc=1

When i get my ASUS 7800GTX i will update these pics and thread!
xcobra
07-30-2005, 08:59 PM
Nice rig man. congrats! now get clocking!! :p:
EvlUndrWareNome
07-30-2005, 09:00 PM
Nice system. You will enjoy it :)
BrokenWall
07-30-2005, 09:03 PM
i will start overclocking and tweaking after i get my 7800gtx, i dont want to tweak it for a mx4000! LMAO
xcobra
07-30-2005, 09:19 PM
i will start overclocking and tweaking after i get my 7800gtx, i dont want to tweak it for a mx4000! LMAO
True that hehe...post some screenies of benches when you get it ;)
Faceless Rebel
07-30-2005, 09:42 PM
A fine system. It will serve you well.
en4cer
07-30-2005, 10:44 PM
Congrats on the new system :toast: That is some very nice hardware you've chosen, do you plan on adding another 7800 for SLi?
BrokenWall
07-31-2005, 08:17 AM
yeah i plan on adding a second 7800gtx later down the road! but right now i only need one
craig588
07-31-2005, 08:21 AM
Did you use a marker to blank out your serial?
Supertim0r
07-31-2005, 08:23 AM
this is a really new stepping :p:
TheMeatFrog
07-31-2005, 08:27 AM
Did you use a marker to blank out your serial?
It looks like he did to me :rolleyes:
Jamo
07-31-2005, 08:31 AM
talk about better safe than sorry lol, nice rig btw, hope the marker comes off without taking the stepping off
BrokenWall
07-31-2005, 08:31 AM
its call photoshop! i would never take a marker to a cpu
Supertim0r
07-31-2005, 08:48 AM
could you tell me why your removing the info on the cpu ?
I've seen a few people doing this :confused:
craig588
07-31-2005, 12:28 PM
If you need to RMA it AMD will check forums and not let people RMA CPUs that have been overclocked or cooled with non-stock heatsinks. They check the serial numbers. Now all they need to check is for one with them markered over.


Photoshop has some nice features apparantly.
igor0203
07-31-2005, 01:01 PM
wow man, that awesome case! which case it that? it's huge!!!
and congrats on nice setup!
Supertim0r
07-31-2005, 02:09 PM
wow !
AMD is looking at overclocker forum to see if their product have been overclocked :eek:
BrokenWall
07-31-2005, 07:35 PM
They check the serial numbers. Now all they need to check is for one with them markered over.

Its not a marker, i took the photo and went in photoshop and just took a black pencil to it thats it, i still have the orignal pic of it with the serial!




And the Case is the Lian-Li PC-V1000
IvanAndreevich
07-31-2005, 07:37 PM
Very nice case :)
TMM
07-31-2005, 07:43 PM
wow !
AMD is looking at overclocker forum to see if their product have been overclocked :eek:
lol, i doubt its a common occurrence, but its better safe then sorry ;)
MRBIGSHOT
07-31-2005, 08:47 PM
i wonder if they really do. the have hundred thousand cpus out at any given time, i dont htink they are really keeping track
trance565
07-31-2005, 08:52 PM
lol, i never realised how massive that heatsink was, puts mine to shame :(
waddupmm
07-31-2005, 08:56 PM
Lovely case could use a little wire managment tho :X
xxxAgentxxx
07-31-2005, 09:28 PM
nice clean rig man ;)
texuspete00
08-01-2005, 07:14 AM
wow !
AMD is looking at overclocker forum to see if their product have been overclocked :eek:

I would agree that that statement was what people are paranoid of. Personally I think the chances they actually to do it are best left to those with tin-foil hats on. My money's on they don't. Pulling numbers off of jpeg's or having this be someones job to search for them sounds a waste of time to me. I'll do it because everyone else does.

and benches guys benches.... funny my 3700+ and DFI look exactly like that. Whodathunkit!!! Seems you need more infection. :D Good psu I'm sure you can get cranking on the cpu without the GTX yet.
BrokenWall
08-01-2005, 09:06 AM
I would agree that that statement was what people are paranoid of. Personally I think the chances they actually to do it are best left to those with tin-foil hats on. My money's on they don't. Pulling numbers off of jpeg's or having this be someones job to search for them sounds a waste of time to me. I'll do it because everyone else does.

and benches guys benches.... funny my 3700+ and DFI look exactly like that. Whodathunkit!!! Seems you need more infection. :D Good psu I'm sure you can get cranking on the cpu without the GTX yet.

Yeah its an Enermax

heres the link! My Power Supply @ Monarch! (http://www.monarchcomputer.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=M&Product_Code=100122&Category_Code=ps-enermax) and i rather do tweak it all at once, because with my old system i had issues with going from a fx5600 to a 6800ultra, the fx5600 would crash my system at 2.1Ghz when i got my 6800ultra it allowed me to take it up to 2.2Ghz, i know it aint much but it made a different in about 100 points in cpu points!
ArcticOC
08-01-2005, 02:51 PM
My new system.. 0db :toast:

http://forum.hardware.no/index.php?act=Attach&type=post&id=4592443

Asetek Micro on the CPU.. This cooler is sick i`m tellin`ya

32C idle @ 1,4Volt and 1800MHz.. and that is w/o a fan blowing on it When running SuperPI 2M the highest temp was 39C (100% passive cooled)
Absolute_0
08-01-2005, 03:30 PM
My new system.. 0db :toast:

Asetek Micro on the CPU.. This cooler is sick i`m tellin`ya

32C idle @ 1,4Volt and 1800MHz.. and that is w/o a fan blowing on it When running SuperPI 2M the highest temp was 39C (100% passive cooled)

Good for passive cooling but SP2M? Run SP2004 small FFTs for a few hours and see how hot it gets ;)

at any rate it certainly looks cool

Brokenwall, good system. Keep us updated about how it OCs
Jomiy
08-01-2005, 04:08 PM
Nice Rig! That case is humongoloid!

oohhh it doesn't say v1.1 on your RAM :)
BrokenWall
08-01-2005, 08:47 PM
Nice Rig! That case is humongoloid!

oohhh it doesn't say v1.1 on your RAM :)

so if it doesnt say v1.1 its TCCD?
Ouchy
08-01-2005, 08:59 PM
Yes, my impression was that the TCC5 sets came with small letters in corner saying Version 1.1. Unless they recently changed it, the lack of this sticker should indicate that it's TCCD.
BrokenWall
08-05-2005, 12:59 PM
I picked up my eVGA 7800GTX from monarch TODAY!! i was gonna get an ASUS but i was short on cash so here we go. This card is hot 55C idle & about 73C After benching, makes my chipset hit about 58C gonna mod some fans to blow over that region.

Scores: (didnt sumbit)

3DMark01= 26482
3DMark03= 16534
3DMark05= 7917
AquaMark= 79973 (gfx: 12618 / cpu: 10913)

hope these arent to bad for a base line with the 77.50 drivers
also no tweaks or no overclocking done just wanted to get some baseline scores with my 3700+ & 7800GTX
MaxT
08-05-2005, 01:04 PM
I got the same week/stepping 3700 SD. Wondering how it overclocks. Be sure to post your OC results.

Nice rig you got so far :toast:
kosmonova
08-05-2005, 01:34 PM
yes tcc5 is running at about 280-295 2,5-3-3-x settings but tccd is running 280-295... 2,5-4-3-x timing
BrokenWall
08-05-2005, 02:19 PM
Heres the pics of the 7800GTX and the chipset, gonna cut a hole in the side of my case and mount a 120mm fan to blow right over that chipset and the end of the card maybe that should help alot!

What do yall think?

http://www.xtremesystems.org/forums/attachment.php?attachmentid=35378&stc=1
texuspete00
08-05-2005, 03:24 PM
Hey man, can I send you some pics of my rig, and get photochopped SLI too! :D

Anyways, fan always helps, but in the mean time, I think I got a few degress just removing the next pci slot cover off, fan kind of suck in a little fresh air. OK, maybe like 1 or two degrees... but... who cares!
BrokenWall
08-05-2005, 06:06 PM
thinking about mounting a 80mm or 120mm fan on the case side to blow cool outside case air onto this problem area (chipset and end of 7800) will this work?
BrokenWall
08-05-2005, 09:00 PM
so i scored 7917 at first in 05 i did the page file on my IDE 160GB and defragged my RAID 0 250s and i restart and run 05 again and score 7992! all stock!
danskim
08-05-2005, 09:42 PM
Where'd you get the PC-V1000 for $100 if i may ask?
BrokenWall
08-05-2005, 09:46 PM
monarch computer it was the demo case!
BrokenWall
08-05-2005, 10:08 PM
Here ya go guys 8035 all stock with 77.72 drivers

http://service.futuremark.com/compare?3dm05=1096052
i found nemo
08-05-2005, 10:31 PM
nice keep up the good work, and yea a fan on the chipset will definately help
sdkevin
08-06-2005, 07:57 AM
My new system.. 0db :toast:

http://forum.hardware.no/index.php?act=Attach&type=post&id=4592443

Asetek Micro on the CPU.. This cooler is sick i`m tellin`ya

32C idle @ 1,4Volt and 1800MHz.. and that is w/o a fan blowing on it When running SuperPI 2M the highest temp was 39C (100% passive cooled)

is that a custom chipset cooler? If not, please link me to site where I can purchase thanks!
Jamo
08-06-2005, 08:03 AM
is that a custom chipset cooler? If not, please link me to site where I can purchase thanks!

i think thats a arctic cooling freezer 64 cut up for the northy, thats quite a good idea!
ArcticOC
08-06-2005, 08:06 AM
i think thats a arctic cooling freezer 64 cut up for the northy, thats quite a good idea!

http://www.dfi-street.com/forum/showthread.php?t=6577&page=5

This is my original post @dfi-street

The cooler keeps the chipset @ 22deg.C (running HTT/FSB 370MHz)

Yes, it`s an arctic cooling freezer 4 (not 64)