Final G.Skill FF results @ HTT 309 2.5-3-3-5

[formyfaith]

Think this is the best I can do with my FF. :)

http://myhome.hanafos.com/~onechu/ramresults/gskill_ff_309_32mbspi.jpg

Now gotta go for the GH hunt. :D

[alexio]

Awesome :toast:

[guess2098]

that's a really good FF pair.... ^^ ns

[Onepagebook]

dang...nice result here :D
vdimm?

[formyfaith]

dang...nice result here :D
vdimm?

3V with a bunch of fans for temporary benchmarking purposes. :)

[[XC] moddolicous]

see if u can lower max async latency to 7ns. That may give u a nice boost. Really nice results.

[BioPC]

Congratulations! Nice OC combination you got there :clap:
You beat my OCZ by 1mhz :) Time to change my cpu.
Nice to see how tight you made them go so high, probably you could go higher relaxing some settings.
Could you get a Sandra screenshot? And your highest SuperPi 1M? just for curiosity.

[formyfaith]

see if u can lower max async latency to 7ns. That may give u a nice boost. Really nice results.

Can't lower it to 7ns with 309 HTT. ;)


Congratulations! Nice OC combination you got there :clap:
You beat my OCZ by 1mhz :) Time to change my cpu.
Nice to see how tight you made them go so high, probably you could go higher relaxing some settings.
Could you get a Sandra screenshot? And your highest SuperPi 1M? just for curiosity.

Dude it was really hard to achieve 309. ;)

Actually I already had a 308 screenie before the time of your post

and was gonna post them here, but your 308 screenie made me

benching again at 309 today. :D

I'm totally exausted so please don't post somthing like a 310 screenie. :p:

BTW If you change your CPU and cooling, think your OCZ might go up higher. :)

I'm testing my GH right now with a different bios, so I'll post some sandra

shots a bit later. :)

[BioPC]

Can't lower it to 7ns with 309 HTT. ;)
I'm totally exausted so please don't post somthing like a 310 screenie. :p:
shots a bit later. :)

:D Sure i wont for some time. :wiggle: I used many hours too :confused2

[xgman]

What is your 24/7 ram voltage on the FF's?

[xgman]

Does 3v really make much of a difference above 300?

[HousERaT]

nice clocks on that ram...... how high do they go with normal voltage?

[formyfaith]

What is your 24/7 ram voltage on the FF's?
2.7V
Does 3v really make much of a difference above 300?
For me, sure it does. but I've never put more than 3V to my sticks. ;)
nice clocks on that ram...... how high do they go with normal voltage?
Havn't really tested them thorough with normal voltage. :D

[windwithme]

so crazy... :eek:
great :slobber:

[iboomalot]

whats your everest scores at those timings and speeds??

oh and sandra ???

[dippyskoodlez]

Shouldn't you run a tras of 7? ;)

[formyfaith]

Shouldn't you run a tras of 7? ;)

For me, tras 5 gave me better spi numbers comparing with tras 7 under same settings. :)
Haven't checked with everest or sandra yet, but I kind of trust SPI numbers the most. ;)

I'll check out how it goes with everest and sandra today. :)

[iboomalot]

just wondering what your LAT and Bandwidth is being stable wasn't why I asked about everest and sandra but thanks for the info :D