xtreme
12-26-2002, 10:52 AM
Hi ;)
I Just wanna give some advice for all those, you have problems with high FSB and ATI Radeon cards !
1. If you have enabled AGP 8x, the Radeon won't run on AGP clock higher than ~ 71 (FSB ~ 175) So when you haven't a nForce Board, set AGP down to 4x ! (Use Smartgart, if you cant switch in BIOS...)
2. NEVER share your AGP Slot with another card, so check your interupts and let the ATI run alone ;)
3. Do not piggbacking your the Radeon molex-connector with the hdd power connector !
hope to help some :)
thanks a lot to all ppl, who spend time on this problem !
I Just wanna give some advice for all those, you have problems with high FSB and ATI Radeon cards !
1. If you have enabled AGP 8x, the Radeon won't run on AGP clock higher than ~ 71 (FSB ~ 175) So when you haven't a nForce Board, set AGP down to 4x ! (Use Smartgart, if you cant switch in BIOS...)
2. NEVER share your AGP Slot with another card, so check your interupts and let the ATI run alone ;)
3. Do not piggbacking your the Radeon molex-connector with the hdd power connector !
hope to help some :)
thanks a lot to all ppl, who spend time on this problem !