malves MAX 3 VTT mod.

[Nosfer@tu]

http://www.malvescorner.net/ic7.html

Im preforming the VTT for a mate. but Im not quite sure where to cut the trace.

Is it parallel with the white line or is it across the white line???

I can´t seem to se anything on the board.

I thank you in advance for your help.

Regards a soldering Nosfer@tu :)

[Malves]

It's a brown trace parallel to the white line. Look harder and you'll see it.;)

[CaTalyst.X]

its very easy to cut ;)

-CaT

[Nosfer@tu]

Thanks ALOT lads :D

At the VTT picture you took malves. is it the cut I can se on the picture`?
Guess I need glases :D

Now to the Vagp mod.

I have no problem cutting in the board. seams easy :)
and my soldering skills are okay too, but how to geet the 2 wires attached on the pcb where I cut the trace is a mistery to me.

I migth be abel to scrach some of the copper line out so I can solder the whire there, and them give it some superglue to make it stick. :)

[Malves]

Yes, you have to scrape the traces to solder there. But I don't recommend Vagp mod. It won't help you much, if any.

[CaTalyst.X]

Yeah vAgp is pointless

-CaT

[Nosfer@tu]

Okay, We will droop the Vagp :)

Ass fare as I remember the VTT issues is only from 2.81 Vmem to 3.19 Vmem.

But I will make the VTT mod anyway, But will the Vdimm let my freind go past 3.2 without modding his PSU?

Im very happy for your assistanse lads :D

BTW Malves I am to send greetings from bias_hjorth, he speaks Highly about you ;)

[Malves]

Been a while last time I talked to Tobias. Thank you.

Nope, without a modded psu, you'll be stuck at ~3.2v. Also, I only recommend vdimm and VTT mods for this board. Those will make the real difference. But I think there's a droop mod somewhere for it.

[Nosfer@tu]

I have heard that Vdroop doesent do much of a difference. But its such an old board, So Ill just do the Vagp,VTT and the Vdimm.

My freind just wants to toast the board in a atempt to reach high clocks :D
And I said, " That´s the spiret son "

[enzoR]

Vagp helped me 5-7mhz 1:1.

i also draw vmem from the 5v line.

[Nosfer@tu]

So instead of making the Vdimm mod I can just draw a whire from the 5 V line?

But where to solder it :)??

BTW Im very happy withe the support from you lads :D

[Nosfer@tu]

Just did both mods and after som sweating I found that they work perfect.

Im really proud as i find the VTT mod complicated :D

THX a lot for your help and the exelent guide ;=)