PDA

View Full Version : Overclocking my new pretty Sys [AMD]


killingspreez
07-16-2005, 04:03 PM
Hi at all,
now everything is okay. System is fully stable and i'm f**king happy :)
all results ARE NOT THE LIMIT. just little test-actions.

look at the pics and say what you think and which options i could optimize.


*SPECIAL THANKS TO CHARLIE AND G.SKILL*

Here some actions:
http://img342.imageshack.us/img342/7515/33volt4fv.th.jpg (http://img342.imageshack.us/my.php?image=33volt4fv.jpg)

http://img327.imageshack.us/img327/2209/34volt5ok.th.jpg (http://img327.imageshack.us/my.php?image=34volt5ok.jpg)

and a few runs with 3,4vdimm
http://img327.imageshack.us/img327/82/bandwidth14gs.th.jpg (http://img327.imageshack.us/my.php?image=bandwidth14gs.jpg)

the same again just more MHZ@CPU
http://img327.imageshack.us/img327/3573/28053cz.th.jpg (http://img327.imageshack.us/my.php?image=28053cz.jpg)

is this result good for only 255mhz?!
http://img327.imageshack.us/img327/9246/bandwidth28re.th.jpg (http://img327.imageshack.us/my.php?image=bandwidth28re.jpg)

System used:
AMD Athlon 64 3700+ SD 0518 UPAW
DFI Ultra-D
G.skill GH *Charlie*
OCZ Powerstream 520W
.
.
.

Okay.......suggestions?

charlie
07-16-2005, 04:06 PM
Nice.... good CPU and only 1.6v!!
:woot:

C

killingspreez
07-16-2005, 04:13 PM
thank's
your ram is doing a great job!

i'll max the system after my holidays in prague ;)

mfg

Crazykooter
07-16-2005, 04:58 PM
Looks good to me. I was a tad over that with water cooling a 1.64 volts. SIg. But then I got the idea to remove my IHS and lost almost 100 mhz oc and gained 2c cooler temps. I know I need to figure that out but I am sure youll be about the same speed as I am if you cranked the volts up a tad. Gotta love these SD cores.

killingspreez
07-17-2005, 04:53 AM
hm i still got one problem :(
if i set the 4vdimm jumper sometimes i can't set vdimm higher than 3,2v in the bios.
any trick to get it to work?

mfg

runmc
07-17-2005, 05:12 AM
Not much of an answer - but you could restart your pc to see if that helps, or you could try another bios. There's about 50 bios for that board. :p:

killingspreez
07-17-2005, 05:30 AM
yes but jsut one is working for me!
it's the 7.04-2b or something like that.
all others won't boot with multi bigger than 9x and the 6.23 / 6.18 don't support lan here :(

that sucks ^^

mfg

craig588
07-17-2005, 06:56 AM
Be very careful with that bios, high cpu voltage percent multipliers will kill CPUs because of a bug.

killingspreez
07-17-2005, 07:12 AM
i'm just using up to 110% i hope it's "safe"
and everytime i set a new v-core i look into the bios before booting into win.

mfg

craig588
07-18-2005, 04:46 AM
I think 1.1 is ok, I think deaths started happening at 1.2s and above.

Der_KHAN
07-18-2005, 05:32 AM
hm i still got one problem :(
if i set the 4vdimm jumper sometimes i can't set vdimm higher than 3,2v in the bios.
any trick to get it to work?

mfgu have to set a vcore other than 1.400 to be able to select vdimm over 3.2v

Xyus89
07-18-2005, 07:34 AM
If it's a big prob what lots of people , there will be an new official bios in a short while.

killingspreez
07-22-2005, 09:30 AM
okay today i returned from prague !
it was great....well tomorrow i'll overclock again and push for the real limits.
now it's cold the screens were taken with an ambienttemp of ~28-32°C!!

mfg

killingspreez
08-04-2005, 08:43 AM
new record.......
i'll push for the 28" ;)

http://img76.imageshack.us/img76/9602/283021wo.th.jpg (http://img76.imageshack.us/my.php?image=283021wo.jpg)

mfg

UrmoZ
09-02-2005, 05:58 PM
:) greetings from estonia

that`s nice result, but this SD cpu can do more

i got 0522XPMW chip 3700+ SD and i`m cooling it w/ air

just pushed my best SPI 1M time under 28secs :p:

27,953s to be exact: http://www.zone.ee/urmoz/Bench/SPI%20Rec.JPG?2

:banana: just keep goin`

harleybro
09-02-2005, 07:31 PM
Nice results so far killingspreez. :toast: I had the sae chip for a few days and was really impressed with it's OCing capabilities. Do you have any A64 tweaker screenies? :)

babyelf
09-02-2005, 07:50 PM
keep going :toast:

looks like a good chip :)

ZeroX
09-03-2005, 02:02 AM
Keed the good job.

I think u can do under 28.5s ;)

Regards

killingspreez
10-09-2005, 12:11 PM
well here are some newer screens....
maximum ram-freq. @ 3,6v
http://img156.imageshack.us/img156/2879/ddr2706pn.th.jpg (http://img156.imageshack.us/my.php?image=ddr2706pn.jpg)

and fastest pi-score
http://img156.imageshack.us/img156/7296/28604th.th.jpg (http://img156.imageshack.us/my.php?image=28604th.jpg)

i'll break 2,9 -2,95 ghz if the ambient-temp is under 0°C
i love the winter ;)

mfg

Plague_oc
10-10-2005, 03:12 PM
very nice